Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: triskel on June 25, 2017, 03:41:24 PM

Title: Homemade metal-filler
Post by: triskel on June 25, 2017, 03:41:24 PM
I have recently improvised a metal-filler for reedplates that sets hard very quickly - though I've only tried it so far to successfully reconstitute the rounded tips of some aluminium concertina reed shoes that had had holes drilled through and/or notches filed in them.

Being used to employing wood dust and superglue as a filler (a common technique on fretted instrument fingerboards and suchlike), and in a spirit of "let's see what happens", I rolled a small piece of 0000 wire wool into a ball and packed it into the gap, then squeezed on enough superglue to soak into it. There was a strong reaction, with acrid fumes from it, before it quickly set hard like metal and could be filed to shape/thickness as needed.

It's the dark grey area on the right:

(http://i17.photobucket.com/albums/b66/StephenChambers/Concertinas/001_1.jpg)

Others may find it useful too...
Title: Re: Homemade metal-filler
Post by: hallelujahal on June 25, 2017, 05:20:18 PM
Hi Stephen how quick did it set?
AL
Title: Re: Homemade metal-filler
Post by: triskel on June 25, 2017, 08:16:45 PM
I'll time it next time Al, but you're talking about seconds, not even minutes.
Title: Re: Homemade metal-filler
Post by: Theo on June 25, 2017, 08:37:22 PM
Work on a fireproof surface, superglues fast setting reactions generate heat.
Title: Re: Homemade metal-filler
Post by: mory on June 25, 2017, 08:41:03 PM
and wire wool is highly combustible. AtB mory
Title: Re: Homemade metal-filler
Post by: triskel on June 25, 2017, 10:04:17 PM
Work on a fireproof surface, superglues fast setting reactions generate heat.

Well something was different when I tried the experiment again tonight and I didn't get that same "strong reaction, with acrid fumes from it" - but it still dried hard, and could be filed down, within about a minute.

Here's that same concertina reed shoe with the back notch filled in too:

(http://i17.photobucket.com/albums/b66/StephenChambers/003_3.jpg)

This method certainly seems to have the great advantage of setting hard, and becoming workable, very rapidly.
Title: Re: Homemade metal-filler
Post by: triskel on June 25, 2017, 10:12:38 PM
Could it be useful for filling larger gaps in the slots of reeds that have been "clipped" shorter (to raise the pitch of the reed) I wonder?

Whilst the technique of "coining" or "chiseling" (I'll open another thread on that) could perhaps be used when the gap is only small...
Title: Re: Homemade metal-filler
Post by: hallelujahal on June 25, 2017, 10:43:15 PM
I was thinking the same myself, given the recent thread about clipping reeds etc?
I can see myself using the method when needing to make up the odd concertina concertina reed where a replacement reed is simply not available given shoe size etc.
Title: Re: Homemade metal-filler
Post by: Broadland Boy on June 25, 2017, 11:22:44 PM
It will be interesting to see how durable it is Stephen. There is a very old technique in engineering known as the 'rust joint' where fine cast iron borings or turnings are pounded to a powder, mixed with sal ammoniac, then wetted to a stiff paste before application (urine was supposedly best) and used to caulk joints in things like loosely socketed cast iron pipes which needed to be steam or watertight - having tried to dismantle century old joints, if the wirewool & superglue version is as good, none of us would live to see it fail !
Title: Re: Homemade metal-filler
Post by: mory on June 26, 2017, 07:57:41 AM
Have you tried Isopon/or similar Aluminium wheel filler Stephen. Would seem to be an appropriate solution to the job. All the Best mory
Title: Re: Homemade metal-filler
Post by: triskel on June 26, 2017, 12:09:39 PM
Have you tried Isopon/or similar Aluminium wheel filler Stephen. Would seem to be an appropriate solution to the job. All the Best mory

I've tried numerous metal fillers mory, but find this method much faster, handier and a lot cheaper!

Edited to add "a lot"
Title: Re: Homemade metal-filler
Post by: 911377brian on June 26, 2017, 12:56:40 PM
I've just tried this and am astonished by the results. I was able to file off the excess then finish it off with the Dremel. Excellent!
Title: Re: Homemade metal-filler
Post by: Winston Smith on June 26, 2017, 02:28:30 PM
What a show-off you're becoming, Brian. "With the Dremel" indeed!
Title: Re: Homemade metal-filler
Post by: 911377brian on June 26, 2017, 03:18:52 PM
You've seen through me Edward, it's not a Dremmel it's a cheapo copy.....
Title: Re: Homemade metal-filler
Post by: triskel on June 26, 2017, 06:14:10 PM
You've seen through me Edward, it's not a Dremmel it's a cheapo copy.....

A "Dremmel" not a Dremel, or a "Dreamel" maybe?  ;)

Same as mine!  ;D
Title: Re: Homemade metal-filler
Post by: Lyra on June 27, 2017, 01:40:44 AM
[snip] then wetted to a stiff paste before application (urine was supposedly best)
While intellectually I know there are 1001 legit uses for urine ranging from compost activation to a mordant for dyes and beyond, an emotional part of me shudders at the thought of someone peeing in my melodeon.


(I was going to put a "bad taste" alert, but somehow that just made it worse. Sorry everyone)
Title: Re: Homemade metal-filler
Post by: 911377brian on June 27, 2017, 03:40:43 AM
Pee was used as an additive to plaster when filling large holes. Made it set quickly...
Title: Re: Homemade metal-filler
Post by: triskel on June 27, 2017, 03:48:30 AM
I think I'll stick to using superglue to make my "chemical metal" set quickly thanks, if it's all the same to you...  :o
Title: Re: Homemade metal-filler
Post by: Nick Collis Bird on June 27, 2017, 06:25:53 AM
Urine's not bad compared to dog poo for tanning leather. Unbelievably it was called Pure. 👀
Title: Re: Homemade metal-filler
Post by: george garside on June 27, 2017, 08:49:47 AM
Urine's not bad compared to dog poo for tanning leather. Unbelievably it was called Pure. 👀


true   recycling!
Title: Re: Homemade metal-filler
Post by: Theo on June 27, 2017, 09:02:59 AM
Urine's not bad compared to dog poo for tanning leather. Unbelievably it was called Pure. 👀


true   recycling!

And all natural and organic.   (:)
Title: Re: Homemade metal-filler
Post by: george garside on June 27, 2017, 09:08:02 AM
Urine's not bad compared to dog poo for tanning leather. Unbelievably it was called Pure. 👀


true   recycling!

''peecycling''?

And all natural and organic.   (:)
Title: Re: Homemade metal-filler
Post by: Malcolm Clapp on June 27, 2017, 11:47:16 AM
It seems to be a passable alternative...
Title: Re: Homemade metal-filler
Post by: Broadland Boy on June 27, 2017, 04:46:40 PM
[snip] then wetted to a stiff paste before application (urine was supposedly best)
While intellectually I know there are 1001 legit uses for urine ranging from compost activation to a mordant for dyes and beyond, an emotional part of me shudders at the thought of someone peeing in my melodeon.

In the days of rust joints, urban water was a short cut to illness and why mix your compound using beer before it had been enjoyed  :o I doubt you are alone in your uncomfortable feelings but as Nick rightly notes, leather tanning was not the nicest of processes, likewise the old glues were pretty noisome to make and use.

I'm sure if needed these days Lyra, our modern fettlers would ensure that only the finest wines, caviar & confectionery were used to prepare the solvent - but fortunately triskel has circumvented this with his superglue discovery  ;D

As a general rule, when it came to urine based receipts, is seems 'night rates' were considered better than overtime.............
Title: Re: Homemade metal-filler
Post by: Thrupenny Bit on June 27, 2017, 05:44:11 PM
Ah... Nick beat me too it.
A belt maker in Dartington uses traditionally tanned leather, left to stew for a year or more in such a mixture apparently.

What always intrigues me is - who on earth thought it up?
How do you work out that urine and dog poo will tan leather?
...or pee into plaster to set it hard?

I suppose in years gone by, they got bored with no tv or Internet forum  :-\
A baffled
Q
Title: Re: Homemade metal-filler
Post by: 911377brian on June 27, 2017, 06:10:48 PM
And the brains of the animal rubbed into the skin to soften and preserve it..amazing how far one can go off piste without getting shouted at......
Title: Re: Homemade metal-filler
Post by: triskel on June 27, 2017, 08:32:06 PM
..amazing how far one can go off piste without getting shouted at......

RIGHT! Time to drag us back (almost) on topic.  ;)

I tried Googling "wire wool and superglue" to see if anybody had thought of mixing the two before me. I could only find one reference to a mechanic using it for a patch on an oil leak, but it seems the fumes from the reaction can be used in "fuming" fingerprints, to preserve them, in gathering evidence...   :o
Title: Re: Homemade metal-filler
Post by: Thrupenny Bit on June 27, 2017, 09:13:26 PM
Superglue is a cyanoacrylate, so the fumes might be a Cyanide derivative.... though my chemistry isn't quite there.
Whatever it is, it won't be very nice so take care!
Q
being sensible for a change.
Title: Re: Homemade metal-filler
Post by: Lester on June 27, 2017, 09:17:39 PM
Superglue is a cyanoacrylate, so the fumes might be a Cyanide derivative.... though my chemistry isn't quite there.
Whatever it is, it won't be very nice so take care!
Q
being sensible for a change.

I use super glue for various crack filling jobs on melodeons, especially floating soundboards in old Pokerworks etc, and I always wear a mask otherwise I wheeze for days.
Title: Re: Homemade metal-filler
Post by: triskel on June 28, 2017, 01:40:02 AM
Superglue is a cyanoacrylate, so the fumes might be a Cyanide derivative.... though my chemistry isn't quite there.
Whatever it is, it won't be very nice so take care!

I use super glue for various crack filling jobs on melodeons, especially floating soundboards in old Pokerworks etc, and I always wear a mask otherwise I wheeze for days.

Breathe easy, from what I understand cyanoacrylate is an irritant but not toxic. Apparently the burning in the eyes and throat/sinus is not ultimately bad for you, just bothersome...

"Cyanide" isn't a chemical in itself but a chemical form, and Super Glue's base is in cyanide form, but it is not based on (the poison) potassium cyanide.
Title: Re: Homemade metal-filler
Post by: Theo on June 28, 2017, 07:24:49 AM
I get asthma like symptoms after exposure to superglue fumes which can last several days.   It may only be "irritant"  but you can become sensitised to it, so if you plan to use it more than very occasionally take steps to avoid the fumes.
Title: Re: Homemade metal-filler
Post by: Thrupenny Bit on June 29, 2017, 06:00:57 PM
I'd love to see a manufacturers safety data sheet on it, might do a bit of digging at work.
It's not particularly nice as the fumes indicate!
Q
Title: Re: Homemade metal-filler
Post by: Broadland Boy on June 29, 2017, 11:44:38 PM
You would not learn much Q :( While I have kept most ISO standards in 'e' form against future use most of our COSHH / MSDS sheets were hard copy.

The main 'enlightening' fact I recall from superglue was that it cannot be regarded as poisonous due to bonding body tissue almost instantaneously (i.e. you can't swallow enough) 

Lucid moment = have checked with Henkels website and it appears they are a little more accessible these days, given our parsimonious natures liquid Lidl may be the best mach to check but they are much of a muchness.

http://mymsds.henkel.com/mymsds/DS.do?bu=UT,UA&internet=true

Other than the large surface areapresented by powder, dust and wire wool its affinity for such substances is not evident but there is an exothermic warning now.

Enjoy - although this is one glue not to try sniffing or sipping!
Title: Re: Homemade metal-filler
Post by: Thrupenny Bit on June 30, 2017, 07:40:38 AM
hmmmm.... quote from msds:

Potential Health Effects
 
Inhalation: Exposure to vapors above the established exposure limit results in respiratory irritation, which may lead to difficulty in breathing and tightness in the chest.  Skin contact: Bonds skin in seconds. May cause skin irritation.   Cyanoacrylates have been reported to cause allergic reaction but due to rapid polymerization at the skin surface, an allergic response is rare. Cyanoacrylates generate heat on solidification. In rare circumstances a large drop will burn the skin. Cured adhesive does not present a health hazard even if bonded to the skin. Eye contact: Irritating to eyes. Causes excessive tearing. Eyelids may bond.  Ingestion: Not expected to be harmful by ingestion. Rapidly polymerizes (solidifies) and bonds in mouth. It is almost impossible to swallow. 
 
Yep, impossible to swallow cos it solidifies!
It looks like the effects on breathing several of us report is recognised as an irritant. In my experience of labwork it is quite an irritant to continue the effect after removal from exposure, but seems to produce no lasting effects thank goodness.

So.....if risk assessing making a home made metal filler 'ensure good natural ventilation, wear safety specs and avoid fumes....'
Q
bringing work into the playground.

Title: Re: Homemade metal-filler
Post by: Mutt on June 30, 2017, 11:52:37 PM
Wear appropriate gear.
Title: Re: Homemade metal-filler
Post by: Broadland Boy on July 01, 2017, 01:18:40 AM
Yes, wouldn't want to make his eye water  :o Although their immunity to just about everything harmful makes for a delightfully laidback H & S environment within Gru (Evil) Industries plants.

Now a Minions tuning video would make for interesting watching !
Title: Re: Homemade metal-filler
Post by: Kimric Smythe on July 06, 2017, 05:02:15 PM
Moisture accelerates super glue hardening, the steel wool you used the first time may have picked up some moisture from handling.
 The "vapor" that come s from fast hardening is actually unhardened glue boiling off from the heat. When it touches something like you sinuses or eye the moisture makes it kick. I suspect this is where the irritation comes from.
Title: Re: Homemade metal-filler
Post by: tirpous on March 25, 2019, 02:34:41 PM
Quote
Could it be useful for filling larger gaps in the slots of reeds that have been "clipped" shorter (to raise the pitch of the reed) I wonder?

I tried this approach recently while retuning a reed up by one tone (from A to B).  The tip was getting rather thin by the time the pitch was at Bb, so I decided to file the reed shorter to get it up the rest of the way to B and then fill the end of the slot using the method Triskel describes.  I used more filler than necessary and carefully reopened the slot until the reed tip would clear.  A bit laborious, but overall it worked very well.



 
SimplePortal 2.3.5 © 2008-2012, SimplePortal