Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Homemade metal-filler  (Read 6917 times)

0 Members and 1 Guest are viewing this topic.

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Homemade metal-filler
« on: June 25, 2017, 03:41:24 PM »

I have recently improvised a metal-filler for reedplates that sets hard very quickly - though I've only tried it so far to successfully reconstitute the rounded tips of some aluminium concertina reed shoes that had had holes drilled through and/or notches filed in them.

Being used to employing wood dust and superglue as a filler (a common technique on fretted instrument fingerboards and suchlike), and in a spirit of "let's see what happens", I rolled a small piece of 0000 wire wool into a ball and packed it into the gap, then squeezed on enough superglue to soak into it. There was a strong reaction, with acrid fumes from it, before it quickly set hard like metal and could be filed to shape/thickness as needed.

It's the dark grey area on the right:


Others may find it useful too...

hallelujahal

  • Member
  • *
  • Offline Offline
  • Posts: 46
  • 'Blood & Fire'
Re: Homemade metal-filler
« Reply #1 on: June 25, 2017, 05:20:18 PM »

Hi Stephen how quick did it set?
AL
Logged

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Homemade metal-filler
« Reply #2 on: June 25, 2017, 08:16:45 PM »

I'll time it next time Al, but you're talking about seconds, not even minutes.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Homemade metal-filler
« Reply #3 on: June 25, 2017, 08:37:22 PM »

Work on a fireproof surface, superglues fast setting reactions generate heat.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: Homemade metal-filler
« Reply #4 on: June 25, 2017, 08:41:03 PM »

and wire wool is highly combustible. AtB mory
Logged

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Homemade metal-filler
« Reply #5 on: June 25, 2017, 10:04:17 PM »

Work on a fireproof surface, superglues fast setting reactions generate heat.

Well something was different when I tried the experiment again tonight and I didn't get that same "strong reaction, with acrid fumes from it" - but it still dried hard, and could be filed down, within about a minute.

Here's that same concertina reed shoe with the back notch filled in too:


This method certainly seems to have the great advantage of setting hard, and becoming workable, very rapidly.

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Homemade metal-filler
« Reply #6 on: June 25, 2017, 10:12:38 PM »

Could it be useful for filling larger gaps in the slots of reeds that have been "clipped" shorter (to raise the pitch of the reed) I wonder?

Whilst the technique of "coining" or "chiseling" (I'll open another thread on that) could perhaps be used when the gap is only small...

hallelujahal

  • Member
  • *
  • Offline Offline
  • Posts: 46
  • 'Blood & Fire'
Re: Homemade metal-filler
« Reply #7 on: June 25, 2017, 10:43:15 PM »

I was thinking the same myself, given the recent thread about clipping reeds etc?
I can see myself using the method when needing to make up the odd concertina concertina reed where a replacement reed is simply not available given shoe size etc.
Logged

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Homemade metal-filler
« Reply #8 on: June 25, 2017, 11:22:44 PM »

It will be interesting to see how durable it is Stephen. There is a very old technique in engineering known as the 'rust joint' where fine cast iron borings or turnings are pounded to a powder, mixed with sal ammoniac, then wetted to a stiff paste before application (urine was supposedly best) and used to caulk joints in things like loosely socketed cast iron pipes which needed to be steam or watertight - having tried to dismantle century old joints, if the wirewool & superglue version is as good, none of us would live to see it fail !
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: Homemade metal-filler
« Reply #9 on: June 26, 2017, 07:57:41 AM »

Have you tried Isopon/or similar Aluminium wheel filler Stephen. Would seem to be an appropriate solution to the job. All the Best mory
Logged

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Homemade metal-filler
« Reply #10 on: June 26, 2017, 12:09:39 PM »

Have you tried Isopon/or similar Aluminium wheel filler Stephen. Would seem to be an appropriate solution to the job. All the Best mory

I've tried numerous metal fillers mory, but find this method much faster, handier and a lot cheaper!

Edited to add "a lot"

911377brian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1518
Re: Homemade metal-filler
« Reply #11 on: June 26, 2017, 12:56:40 PM »

I've just tried this and am astonished by the results. I was able to file off the excess then finish it off with the Dremel. Excellent!
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Homemade metal-filler
« Reply #12 on: June 26, 2017, 02:28:30 PM »

What a show-off you're becoming, Brian. "With the Dremel" indeed!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

911377brian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1518
Re: Homemade metal-filler
« Reply #13 on: June 26, 2017, 03:18:52 PM »

You've seen through me Edward, it's not a Dremmel it's a cheapo copy.....
Logged

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Homemade metal-filler
« Reply #14 on: June 26, 2017, 06:14:10 PM »

You've seen through me Edward, it's not a Dremmel it's a cheapo copy.....

A "Dremmel" not a Dremel, or a "Dreamel" maybe?  ;)

Same as mine!  ;D

Lyra

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 558
Re: Homemade metal-filler
« Reply #15 on: June 27, 2017, 01:40:44 AM »

[snip] then wetted to a stiff paste before application (urine was supposedly best)
While intellectually I know there are 1001 legit uses for urine ranging from compost activation to a mordant for dyes and beyond, an emotional part of me shudders at the thought of someone peeing in my melodeon.


(I was going to put a "bad taste" alert, but somehow that just made it worse. Sorry everyone)
Logged

911377brian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1518
Re: Homemade metal-filler
« Reply #16 on: June 27, 2017, 03:40:43 AM »

Pee was used as an additive to plaster when filling large holes. Made it set quickly...
Logged

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Homemade metal-filler
« Reply #17 on: June 27, 2017, 03:48:30 AM »

I think I'll stick to using superglue to make my "chemical metal" set quickly thanks, if it's all the same to you...  :o

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Homemade metal-filler
« Reply #18 on: June 27, 2017, 06:25:53 AM »

Urine's not bad compared to dog poo for tanning leather. Unbelievably it was called Pure. 👀
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: Homemade metal-filler
« Reply #19 on: June 27, 2017, 08:49:47 AM »

Urine's not bad compared to dog poo for tanning leather. Unbelievably it was called Pure. 👀


true   recycling!
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal