Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: Clive Williams on August 22, 2019, 09:02:50 AM
-
Behold, Lester's most excellent set of demo videos on upgrading a Hohner!
Covering topics such as:
- Restricting the treble action
- Removing the thumb strap
- Refacing treble and bass pallets
- Bushing bass buttons
- Retaping bellows
- Conversion to 4th button start and G Scale reed tuning
https://sites.google.com/view/hohnerhotrod
-
Two new videos addedBass and Chord TuningTaping off Thirds
https://sites.google.com/view/hohnerhotrod (https://sites.google.com/view/hohnerhotrod)
-
Sweet
-
I wait anxiously for these!
-
Excellent videos Lester.
As a complete novice and never seen the inside of a melodeon, it demystified the complex workings of the melodeon.
My question is could I convert my D/G Lilly to a 4th button start and G scale reed tuning, to mirror my 4th button start Tommy?
Or is this job two advanced for someone who has never worked on a melodeon before.
-
My question is could I convert my D/G Lilly to a 4th button start and G scale reed tuning, to mirror my 4th button start Tommy?
Or is this job two advanced for someone who has never worked on a melodeon before.
It is undoubtedly possible but I would not recommend it for a first job as tuning fixed flat mounted reeds (like in a Lilly) is another step harder than tuning reeds on removable blocks.
-
Cheers Lester
l will see if I can get anyone here in Australia to do the conversion.(Not sure if Malcolm Clapp is still doing work) 😎
-
As far as I know Malcolm Clapp is no longer doing work. You could try "Captain Accordion" in Victoria, found via Google.
-
New video added
Removal and Refitting of Liliput Keyboard (https://youtu.be/p__2-_8Fk9M)
-
Excellent video Lester! I've only done this once, lots of swearing and dangling the keyboard upside down whilst fiddling things vaguely into place. Then poking a screwdriver with a lump of Blutack on the end down each hole and teasing the button back into line, tedious wasn't the word. I swore I would never do that again, but having seen this I just might. ;)
-
As far as I know Malcolm Clapp is no longer doing work. You could try "Captain Accordion" in Victoria, found via Google.
Cheers mate I will have a look at Captain Accordions :||:
-
Do you have a different method for tuning fixed reed blocks?
eg a Hohner 114?
I was thinking that the push reeds would be difficult to reach and adjust.
-
Do you have a different method for tuning fixed reed blocks?
eg a Hohner 114?
I was thinking that the push reeds would be difficult to reach and adjust.
I tune them outside the box on a scrap pokerwork reedblock making sure to take them slightly sharp of the desired pitch. Then, on fitting, all that should be needed is some gentle scratching to get them in tune which is easy enough even in a 114.
ps It's the pull reeds that are harder to reach and tune.
-
ps It's the pull reeds that are harder to reach and tune.
Although (a bit confusingly) if you have the block on a tuning table/bellows, push/pull is reversed I.e. you pull air through the outside reeds and push it through the block/inside reeds. >:E
-
Thanks for your help, and videos.
I suspected that I'd swap the push pull no mater which way I listed it.
-
New video on Treble Spring Repairs
https://youtu.be/5st25y_0wEY
-
You can simplify the process at the point where you slide the axle rod out. Instead of lifting out all the levers and springs just feed in another rod from the opposite end so all the lever and springs remain in place. This temporary rod can be thinner than the original, but it does need to be straight to pick up the parts easily.
-
Excellent, Lester.....I think most folk who visit the Concertina site will have seen this method for making a Concertina spring which is a similar principal and given the correct gauge of wire and bends in the right place could no doubt be replicated for a long term fix whilst suppliers are closed.
http://hmi.homewood.net/video/test2.MOV
-
...given the correct gauge of wire...
Can you recommend a source of the required gauges of spring wire?
-
...given the correct gauge of wire...
Can you recommend a source of the required gauges of spring wire?
Well, this is a recommended Uk source, but the references I have seen are for Concertina springs. The conversation, being "International" ranged between decimal points of mm's, 0.2x's of inches to "gauge", which I found confusing. The consensus seemed to be that 22 gauge (0.025) Phosphor Bronze wire was about right for Concertina's and having just compared - by eye - my 22G sample to a dismantled Hohner P/work front end, it appears to be the same as the size for the existing springs.
I would imagine Theo/Lester would have springs from both to hand to compare the wire size to confirm. Others advocated P.B. wire "string's" from other instruments of the same gauge.
https://www.ajreeves.com/search/for/spring+wire/
-
Pokerwork/Erica treble spring wire is .50mm for the short levers and 0.55mm for the long levers. The material is steel spring wire Also known as piano wire.
-
....which may equate (in either case ) better to 24 gauge than 22.....but even the 'Tina fettler's were in the grey zone +/- 1 or 2 on the scale.
-
Or, as Lester puts it, 2.5mm and 2.7mm and it does make a difference (he says). [edit: Something's odd. I suspect he may not have meant mm]
I would expect that it is equally important to get the material right.
-
Gauge can mean many things. See the columns at right for music wire size.
-
Re. the "right" material, generic "Piano Wire" can be sourced in plain steel, Phosphor Bronze or Stainless - all have their advocates. The only one which will rust will be the plain, which was probably all that was generally available when they were originally being built. Several 'high end' modern makers advertise that they use stainless. Several budget suppliers still promote 'plain'. There seem to be various discussions about the comparative merits of each, some dependent on ease of supply and PB seems to have the majority vote, but each to their own.
I think the point is that making springs is (a) doable at home and (b) relatively easy and (c) economically viable.
Re Lester's measurements - I fear he may - as in the Bass End bushing video, have his decimals one place out. I still can't get the hang of all this metric stuff either.
-
these are some great video's. i've binge watched a number of them. one question? you mentioned it's good to destroy a piano accordion. why's that?
-
these are some great video's. i've binge watched a number of them. one question? you mentioned it's good to destroy a piano accordion. why's that?
Just a joke amongst melodeon players
-
If you want restrict treble action on one Erica, which size of piece of wood would be best?
-
If fitting the wood bar under the inboard end of the levers as shown here (https://theboxplace.co.uk/2017/11/12/hohner-button-travel-restriction/) then you have to adjust the thickness to fit the space. Not all Ericas need the same, some even need a bar with a slight taper.
-
OK Theo. thank you for the tip.
I like my Erica, . . . but I love my Liliput which I play most of the time.
But now I found som cracks in the Erica fingerboard (not made by me) and I can see some put their fingers deeeep down, so I have to restrict it a little.
And I have glued the cracks. - With hide glue! ;)
-
I appreciate the permanency of the timber 'fillet' to restrict the action, but, I have found some success using heavy gsm (300 'ish ) card.
Triple layered.....it can be graduated to apply more 'meat' beneath the rear most levers and less for the foremost. Some lo-tack tape keeps it all together along it's length and it can be overlaid with felt to soften the action even more and fine tune the action further, if required. It does not need to be 'fixed' per se if cut to be a snug fit.
Being strips of card it can be increased/reduced/broadened/narrowed with no hassle/cost implication until perfected, with a craft knife or roller cutter.
-
New video, not Hohner but a How To for fixing a sticky key on an open keyboard, Dino Baffetti in this case
https://youtu.be/wGWIpqN1w3U (https://youtu.be/wGWIpqN1w3U)
-
Ep. 1 of a new series on the refurb of a late 80's Castagnari Sander, making good and adding two stops to the bass end
https://youtu.be/vSztTt1SRAg (https://youtu.be/vSztTt1SRAg)
-
I like your scientific mixing. The ultrasonic cleaner is on my christmas list, in a recent project i missed cleaning a couple of reeds by accident and they are still causing me problems. Thanks for recording it.
-
Ep. 2 of the Sander Refurb is now published, covers tuning.
https://youtu.be/BpG7PuJ5q9w
-
Ep.3 of the Sander Refurb now live, covers bushing the bass buttons
https://youtu.be/Dx5Sn8hf2y8
-
Parts 4a and 4b of the Sander Refurb - Fitting Bass Stops
Part 4a (https://youtu.be/rtXvwIMxL-o) - Part 4b (https://youtu.be/nSlsFxg_diQ)
-
When I saw that plastic sheet in the back I was all 'oh hey, I wonder...' - pretty wild to find I've offered you a tip! I'm glad that it worked out for you here!
I don't recall if I said so in the original thread, but, you know how you got those horrible little like, plastic wormy bits on the edges when you drill it? And if you try to file the edges of the plastic smooth, you really just seem to make... more worms? A little bit of some kinda metal polish, eg Brasso or Autosol, and for eg the holes, something like https://www.amazon.co.uk/Dremel-422-Polishing-Cone/dp/9733342106 - cone shaped polishing bits - tends to clean up the edges quite nicely and sorts out those crumby bits. I bought a huge bag of knock off polishing tips on ebay at some point, and those worked well.
It's important to note that PETG is a thermoplastic so, can be shaped/deformed by heat - other kinds of plastic are available. Although it seemed to work ok for me! I do wonder if it/a similar product could be a) safely be cut with a heated blade or b) smoothed with some kind of heated tip. With the square holes, I do also rather wonder if it could be gingerly chiseled through with your template? I did the majority of my cuts with a pair of scissors, which felt very odd, and I had the luxury of matching up against round holes.
Thank you for continuing your series here with these Sander videos.
-
Hello first posting from me. Following Workgroup Absolute Beginners workshop a few weeks back, I decided to have a go at limiting the keyboard action, having found Lester’s excellent video.
However inside my Chinese pokerwork, I have discovered that the keyboard screws are buried under two very deliberate blobs of glue.
Any recommendations how I remove this glue so that I can proceed ?
Also any idea where I can source a small quantity of model fixing screws - seems a waste to buy a hundred online ?
-
Hello first posting from me. Following Workgroup Absolute Beginners workshop a few weeks back, I decided to have a go at limiting the keyboard action, having found Lester’s excellent video.
However inside my Chinese pokerwork, I have discovered that the keyboard screws are buried under two very deliberate blobs of glue.
Any recommendations how I remove this glue so that I can proceed ?
Also any idea where I can source a small quantity of model fixing screws - seems a waste to buy a hundred online ?
I usually cut away at the glue with a scalpel until the screw head is revealed. Be very careful with the screws they are made of cheese and will snap if cross threaded (Ask me how I know :) ). My source of small screws is Model Fixings (https://www.modelfixings.co.uk/self_tapping_screws.htm), for this job suitable length pan head self tappers is my choice.
-
The correct screws for plastic keyboards, German or Chinese, is M3 x 40. Please don’t use self tappers it will just mess up the threads and make it difficult to use the correct screws in future.
-
The correct screws for plastic keyboards, German or Chinese, is M3 x 40. Please don’t use self tappers it will just mess up the threads and make it difficult to use the correct screws in future.
Just to cover any misunderstanding from my post my reference to self tappers was in reply to the 'Also any idea where I can source a small quantity of model fixing screws - seems a waste to buy a hundred online ?' query not to replacements for the keyboard screws
-
Just to ally any fears.
I can just confirm that I was able to remove the M3 keyboard screws, which having followed Lester's advice, were quite intimidating. Butter they are...
One was corroded and the other looked burred despite being under a blob of glue since production ?
However I resorted to the rubber band trick and they budged.
The requisite piece of wood was screwed in, though I suspect I will revisit in due course because I think I will do a better job next time, and keyboard reattached with the original screws.
I now must learn to play...
-
I now must learn to play...
If you can master the screws paying will be easy (:)
-
Hello Lester. The lever elbows connecting button to pallet on the Club II (all mechanism from one flat piece and difficult to bend) are different to that in the pokerwork and double ray (twisted elbow and relatively easy to bend). To raise the buttons, do I use the same technique as on your video ie apply gentle force and push them closer and thereby raise the button height? Feels like I would gave to apply too much pressure.
Thanks in advance.
-
The lever elbows connecting button to pallet on the Club II (all mechanism from one flat piece and difficult to bend) are different to that in the pokerwork and double ray...
Which version of Club II do you have in mind ?? I have an older Club II (1930-40s celluloid equivalent of the wooden Erika of same era) on which the mechanism is similar to Pokerwork, etc...
-
It is a wooden Erika style box
-
On my Club II - Erika-style as well, but celluloid - the keyboard mechanism for the 2 main rows is Hohner-standard and could be adjusted the usual way. The mechanism for the 4-button half-row is on its own axle and has tubular rods to 'telegraph' movement from the centrally-located buttons to the pallets located at the very end of each row (the half-row reeds are at the ends of the 2 reedblocks). These 4 buttons may be more tricky/risky to adjust. Is your setup similar ??
-
My experience is the same. See the picture below. The linkage is made from one flat piece of sheet metal, arranged and hinged on edge which will make it difficult to bend. I may have to be brave and try it. Just careful as I don't want to break anything. Measure trice and cut once!
-
OK, now I understand what you meant, it's really not the same arrangement at all.
-
What is "the rubber band trick"?
Dennis S.
-
What is "the rubber band trick"?
Dennis S.
If only some one had made a video (:)
https://www.youtube.com/watch?v=5st25y_0wEY
Not sure how a temporary spring repair helps remove corroded or burred screws.
-
What is "the rubber band trick"?
Dennis S.
Put the band on top of the screw first for a bit more leverage. When I bought a Chinese pokerwork 2nd hand it had burred keyboard screws with glue on top, so I had to do something similar. https://youtu.be/819nd6fPXqk
-
New video on how to unstick reeds
https://www.youtube.com/watch?v=Tnll7g4cAnM
-
i tried to restricting the treble action on my black erica (old one with 12 bass button and a wooden keyboard) but it did not work. Is there a comparable way to restrict the action on ericas?
-
i tried to restricting the treble action on my black erica (old one with 12 bass button and a wooden keyboard) but it did not work. Is there a comparable way to restrict the action on ericas?
Isa it an EriKa rather than an EriCa?
-
i tried to restricting the treble action on my black erica (old one with 12 bass button and a wooden keyboard) but it did not work. Is there a comparable way to restrict the action on ericas?
Isa it an EriKa rather than an EriCa?
no its an erica with the curved grill.
-
Just to thank Lester for his brilliant videos and make a note of a possible alternative approach to the thumb strap removal procedure.
After cutting away the leather, I found a pair of Knipex rebar cutters took off the ends of the rivets in one bite. A bradawl poked the other ends out easily enough.
I covered the holes with a plastic ID card blank that I begged from a local print shop as a sample. The card is shiny black plastic that looks so much like the fingerboard that I couldn't even photograph it successfully. I had to take a strip off it (it was a bit too wide), but it was easily done with a metal rule and a Stanley knife. It's very smooth under the thumb as you play the box.