Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 [3]   Go Down

Author Topic: Lester's Hohner Hotrod Demos on Hohner Repair and Upgrading  (Read 29977 times)

0 Members and 1 Guest are viewing this topic.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Lester's Hohner Hotrod Demos on Hohner Repair and Upgrading
« Reply #40 on: February 28, 2022, 07:57:24 PM »

The correct screws for plastic keyboards, German or Chinese, is M3 x 40. Please don’t use self tappers it will just mess up the threads and make it difficult to use the correct screws in future.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Lester's Hohner Hotrod Demos on Hohner Repair and Upgrading
« Reply #41 on: February 28, 2022, 08:05:38 PM »


The correct screws for plastic keyboards, German or Chinese, is M3 x 40. Please don’t use self tappers it will just mess up the threads and make it difficult to use the correct screws in future.
Just to cover any misunderstanding from my post my reference to self tappers was in reply to the 'Also any idea where I can source a small quantity of model fixing screws - seems a waste to buy a hundred online ?' query not to replacements for the keyboard screws

Giles

  • New Starter
  • Offline Offline
  • Posts: 2
Re: Lester's Hohner Hotrod Demos on Hohner Repair and Upgrading
« Reply #42 on: March 06, 2022, 07:02:20 PM »

Just to ally any fears.

I can just confirm that I was able to remove the M3 keyboard screws, which having followed Lester's advice, were quite intimidating. Butter they are...
One was corroded and the other looked burred despite being under a blob of glue since production ?

However I resorted to the rubber band trick and they budged.

The requisite piece of wood was screwed in, though I suspect I will revisit in due course because I think I will do a better job next time, and keyboard reattached with the original screws.

I now must learn to play...


 
   
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Lester's Hohner Hotrod Demos on Hohner Repair and Upgrading
« Reply #43 on: March 06, 2022, 07:09:11 PM »

I now must learn to play...
If you can master the screws paying will be easy  (:)

Johnny S

  • Member
  • *
  • Offline Offline
  • Posts: 34
  • B/C Player
Re: Lester's Hohner Hotrod Demos on Hohner Repair and Upgrading
« Reply #44 on: April 19, 2022, 11:38:57 AM »

Hello Lester. The lever elbows connecting button to pallet on the Club II (all mechanism from one flat piece and difficult to bend) are different to that in the pokerwork and double ray (twisted elbow and relatively easy to bend). To raise the buttons, do I use the same technique as on your video ie apply gentle force and push them closer and thereby raise the button height?  Feels like I would gave to apply too much pressure.

Thanks in advance.
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Lester's Hohner Hotrod Demos on Hohner Repair and Upgrading
« Reply #45 on: April 20, 2022, 02:07:44 AM »

Quote
The lever elbows connecting button to pallet on the Club II (all mechanism from one flat piece and difficult to bend) are different to that in the pokerwork and double ray...

Which version of Club II do you have in mind ??  I have an older Club II (1930-40s celluloid equivalent of the wooden Erika of same era) on which the mechanism is similar to Pokerwork, etc...
Logged

Johnny S

  • Member
  • *
  • Offline Offline
  • Posts: 34
  • B/C Player
Re: Lester's Hohner Hotrod Demos on Hohner Repair and Upgrading
« Reply #46 on: April 20, 2022, 02:02:12 PM »

It is a wooden Erika style box
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Lester's Hohner Hotrod Demos on Hohner Repair and Upgrading
« Reply #47 on: April 20, 2022, 04:54:13 PM »

On my Club II - Erika-style as well, but celluloid - the keyboard mechanism for the 2 main rows is Hohner-standard and could be adjusted the usual way.  The mechanism for the 4-button half-row is on its own axle and has tubular rods to 'telegraph' movement from the centrally-located buttons to the pallets located at the very end of each row (the half-row reeds are at the ends of the 2 reedblocks).  These 4 buttons may be more tricky/risky to adjust.  Is your setup similar ??
Logged

Johnny S

  • Member
  • *
  • Offline Offline
  • Posts: 34
  • B/C Player
Re: Lester's Hohner Hotrod Demos on Hohner Repair and Upgrading
« Reply #48 on: April 20, 2022, 11:05:47 PM »

My experience is the same.  See the picture below. The linkage is made from one flat piece of sheet metal, arranged and hinged on edge which will make it difficult to bend.  I may have to be brave and try it.  Just careful as I don't want to break anything.  Measure trice and cut once!
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Lester's Hohner Hotrod Demos on Hohner Repair and Upgrading
« Reply #49 on: April 21, 2022, 02:04:01 AM »

OK, now I understand what you meant, it's really not the same arrangement at all. 
Logged

Dennis Steckley

  • Good talker
  • **
  • Offline Offline
  • Posts: 77
  • Club System!
Re: Lester's Hohner Hotrod Demos on Hohner Repair and Upgrading
« Reply #50 on: July 31, 2022, 02:48:28 PM »

What is "the rubber band trick"?

Dennis S.
Logged
Hohner Victoria Club ii, Hohner Club III M, Hohner Liliput, Hohner Preciosa, Hohner Piccoletta, Hohner Overture LMMM (and three PA's, including one that is the same size as a Preciosa)

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Lester's Hohner Hotrod Demos on Hohner Repair and Upgrading
« Reply #51 on: July 31, 2022, 06:52:24 PM »


What is "the rubber band trick"?

Dennis S.
If only some one had made a video   (:)

https://www.youtube.com/watch?v=5st25y_0wEY

Not sure how a temporary spring repair helps remove corroded or burred screws.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Lora Mack

  • New Starter
  • Offline Offline
  • Posts: 3
Re: Lester's Hohner Hotrod Demos on Hohner Repair and Upgrading
« Reply #52 on: August 05, 2022, 03:04:00 PM »

What is "the rubber band trick"?

Dennis S.

Put the band on top of the screw first for a bit more leverage. When I bought a Chinese pokerwork 2nd hand it had burred keyboard screws with glue on top, so I had to do something similar. https://youtu.be/819nd6fPXqk
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Lester's Hohner Hotrod Demos on Hohner Repair and Upgrading
« Reply #53 on: May 13, 2023, 10:47:59 AM »

New video on how to unstick reeds
https://www.youtube.com/watch?v=Tnll7g4cAnM

Stefan

  • Member
  • *
  • Offline Offline
  • Posts: 46
Re: Lester's Hohner Hotrod Demos on Hohner Repair and Upgrading
« Reply #54 on: August 14, 2023, 07:50:12 PM »

i tried to restricting the treble action on my black erica (old one with 12 bass button and a wooden keyboard) but it did not work. Is there a comparable way to restrict the action on ericas?
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Lester's Hohner Hotrod Demos on Hohner Repair and Upgrading
« Reply #55 on: August 14, 2023, 08:14:02 PM »

i tried to restricting the treble action on my black erica (old one with 12 bass button and a wooden keyboard) but it did not work. Is there a comparable way to restrict the action on ericas?
Isa it an EriKa rather than an EriCa?

Stefan

  • Member
  • *
  • Offline Offline
  • Posts: 46
Re: Lester's Hohner Hotrod Demos on Hohner Repair and Upgrading
« Reply #56 on: August 15, 2023, 11:22:34 AM »

i tried to restricting the treble action on my black erica (old one with 12 bass button and a wooden keyboard) but it did not work. Is there a comparable way to restrict the action on ericas?
Isa it an EriKa rather than an EriCa?
no its an erica with the curved grill.
Logged

Fionn

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 194
Re: Lester's Hohner Hotrod Demos on Hohner Repair and Upgrading
« Reply #57 on: September 21, 2025, 06:42:00 PM »

Just to thank Lester for his brilliant videos and make a note of a possible alternative approach to the thumb strap removal procedure.

After cutting away the leather, I found a pair of Knipex rebar cutters took off the ends of the rivets in one bite. A bradawl poked the other ends out easily enough.

I covered the holes with a plastic ID card blank that I begged from a local print shop as a sample. The card is shiny black plastic that looks so much like the fingerboard that I couldn't even photograph it successfully. I had to take a strip off it (it was a bit too wide), but it was easily done with a metal rule and a Stanley knife. It's very smooth under the thumb as you play the box.
Logged
Vintage Double Ray C#/D
Pages: 1 2 [3]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal