Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: waltzman on December 28, 2009, 10:47:48 PM

Title: simple "tuning table" and reed scratcher.
Post by: waltzman on December 28, 2009, 10:47:48 PM
I have attatched (hopefully) two pictures of a simple "tuning table" made to attatch to a Hohner Student PA.  (This is one instance where the weight of the PA is an advantage.)  The two holes were drilled to fit the smallest reed block opening.  A thin layer of stick-on felt functions as a seal between the table and reed block and stick-on weather stripping is used to seal against the bellows on the opposite side.  The third picture is a simple reed scratcher made from an old drill bit.  I ground the proximal end flat on a grinder and sharpened it on an oil stone and chucked it up in an X-acto knife handle.  Both work like a charm.

(http://)
(http://)
(http://)
Title: Re: simple "tuning table" and reed scratcher.
Post by: Andrew Culwell on December 28, 2009, 11:01:24 PM
Okay Michael looks like I'm going to be stopping by your way for some tuning lesons! 
Title: Re: simple "tuning table" and reed scratcher.
Post by: melodeon on December 29, 2009, 02:35:08 AM
Interesting..
I see you are using a Peterson "FLIP"
How do you like it. ????
Title: Re: simple "tuning table" and reed scratcher.
Post by: waltzman on December 29, 2009, 12:26:52 PM
Intetesting..
I see you asre using a Peterson "FLIP"
How do you like it. ????

I like it very much.  I didn't find that the built in microphone worked very well at all and neither did the clip on contact pick up.  Using a good mcrophone improved its performance tremendously.  It's gives a very clear reading if you are anywhere near the correct pitch.  If it is way off it can be a little hard to interpret.  In that situation you just use your ear. ;)
Title: Re: simple "tuning table" and reed scratcher.
Post by: melodeon on December 30, 2009, 08:51:23 PM
Thanks. 
I am considering upgrading my 1950 ish Strobo Conn 
The Strobo Flip seems a good compromise between quality and price.
What MIC  did you eventually use ?

Title: Re: simple "tuning table" and reed scratcher.
Post by: Lester on December 30, 2009, 09:00:19 PM
What MIC  did you eventually use ?

Fairly sure the Shure SM58 in the tuning table picture may be a clue   ;D
Title: Re: simple "tuning table" and reed scratcher.
Post by: waltzman on January 01, 2010, 04:02:55 PM
What MIC  did you eventually use ?

Fairly sure the Shure SM58 in the tuning table picture may be a clue   ;D

That's the one.
Title: Re: simple "tuning table" and reed scratcher.
Post by: Owen Woods on January 03, 2010, 04:09:34 PM
That's a really nice solution to a tuning table (:)
Title: Re: simple "tuning table" and reed scratcher.
Post by: melodeon on January 03, 2010, 08:08:01 PM
Thanks
Title: Re: simple "tuning table" and reed scratcher.
Post by: HallelujahAl on January 03, 2010, 08:31:06 PM
For my 2000 post I attach two pics of my tuning table that I made out of an old set of concertina bellows - works like a dream. I have rather a lot of naff concertina bellows and I'm thinking of recycling them as tuning tables, fireside ornaments, household bric-a-bras etc  ;D

Happy New Year to all btw - my busy season is in full swing, so the next 2000 may take a bit longer ;)
AL
Title: Re: simple "tuning table" and reed scratcher.
Post by: Lester on January 03, 2010, 08:35:12 PM
For my 2000 post I attach two pics of my tuning table that I made out of an old set of concertina bellows - works like a dream. I have rather a lot of naff concertina bellows and I'm thinking of recycling them as tuning tables, fireside ornaments, household bric-a-bras etc  ;D

Happy New Year to all btw - my busy season is in full swing, so the next 2000 may take a bit longer ;)
AL

If you have a set ready for making into a tuning table I for one would be interested as I have a tired old scrap box which is going to suffer from my first attempts at tuning.

ps Congrats on the 2000th post
Title: Re: simple "tuning table" and reed scratcher.
Post by: HallelujahAl on January 03, 2010, 09:22:44 PM
Quote
If you have a set ready for making into a tuning table I for one would be interested as I have a tired old scrap box which is going to suffer from my first attempts at tuning.

ps Congrats on the 2000th post

No probs! Will email you Lester.
AL
SimplePortal 2.3.5 © 2008-2012, SimplePortal