Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: simple "tuning table" and reed scratcher.  (Read 6115 times)

0 Members and 1 Guest are viewing this topic.

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
simple "tuning table" and reed scratcher.
« on: December 28, 2009, 10:47:48 PM »

I have attatched (hopefully) two pictures of a simple "tuning table" made to attatch to a Hohner Student PA.  (This is one instance where the weight of the PA is an advantage.)  The two holes were drilled to fit the smallest reed block opening.  A thin layer of stick-on felt functions as a seal between the table and reed block and stick-on weather stripping is used to seal against the bellows on the opposite side.  The third picture is a simple reed scratcher made from an old drill bit.  I ground the proximal end flat on a grinder and sharpened it on an oil stone and chucked it up in an X-acto knife handle.  Both work like a charm.



Logged

Andrew Culwell

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 620
Re: simple "tuning table" and reed scratcher.
« Reply #1 on: December 28, 2009, 11:01:24 PM »

Okay Michael looks like I'm going to be stopping by your way for some tuning lesons! 
Logged
Hohner's, Paolo Soprani red 4 voice, Paddy Clancy Celtic

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: simple "tuning table" and reed scratcher.
« Reply #2 on: December 29, 2009, 02:35:08 AM »

Interesting..
I see you are using a Peterson "FLIP"
How do you like it. ????
« Last Edit: December 30, 2009, 08:49:26 PM by melodeon »
Logged

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: simple "tuning table" and reed scratcher.
« Reply #3 on: December 29, 2009, 12:26:52 PM »

Intetesting..
I see you asre using a Peterson "FLIP"
How do you like it. ????

I like it very much.  I didn't find that the built in microphone worked very well at all and neither did the clip on contact pick up.  Using a good mcrophone improved its performance tremendously.  It's gives a very clear reading if you are anywhere near the correct pitch.  If it is way off it can be a little hard to interpret.  In that situation you just use your ear. ;)
Logged

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: simple "tuning table" and reed scratcher.
« Reply #4 on: December 30, 2009, 08:51:23 PM »

Thanks. 
I am considering upgrading my 1950 ish Strobo Conn 
The Strobo Flip seems a good compromise between quality and price.
What MIC  did you eventually use ?

Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: simple "tuning table" and reed scratcher.
« Reply #5 on: December 30, 2009, 09:00:19 PM »

What MIC  did you eventually use ?

Fairly sure the Shure SM58 in the tuning table picture may be a clue   ;D

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: simple "tuning table" and reed scratcher.
« Reply #6 on: January 01, 2010, 04:02:55 PM »

What MIC  did you eventually use ?

Fairly sure the Shure SM58 in the tuning table picture may be a clue   ;D

That's the one.
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: simple "tuning table" and reed scratcher.
« Reply #7 on: January 03, 2010, 04:09:34 PM »

That's a really nice solution to a tuning table (:)
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: simple "tuning table" and reed scratcher.
« Reply #8 on: January 03, 2010, 08:08:01 PM »

Thanks
Logged

HallelujahAl

  • Guest
Re: simple "tuning table" and reed scratcher.
« Reply #9 on: January 03, 2010, 08:31:06 PM »

For my 2000 post I attach two pics of my tuning table that I made out of an old set of concertina bellows - works like a dream. I have rather a lot of naff concertina bellows and I'm thinking of recycling them as tuning tables, fireside ornaments, household bric-a-bras etc  ;D

Happy New Year to all btw - my busy season is in full swing, so the next 2000 may take a bit longer ;)
AL
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: simple "tuning table" and reed scratcher.
« Reply #10 on: January 03, 2010, 08:35:12 PM »

For my 2000 post I attach two pics of my tuning table that I made out of an old set of concertina bellows - works like a dream. I have rather a lot of naff concertina bellows and I'm thinking of recycling them as tuning tables, fireside ornaments, household bric-a-bras etc  ;D

Happy New Year to all btw - my busy season is in full swing, so the next 2000 may take a bit longer ;)
AL

If you have a set ready for making into a tuning table I for one would be interested as I have a tired old scrap box which is going to suffer from my first attempts at tuning.

ps Congrats on the 2000th post

HallelujahAl

  • Guest
Re: simple "tuning table" and reed scratcher.
« Reply #11 on: January 03, 2010, 09:22:44 PM »

Quote
If you have a set ready for making into a tuning table I for one would be interested as I have a tired old scrap box which is going to suffer from my first attempts at tuning.

ps Congrats on the 2000th post

No probs! Will email you Lester.
AL
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal