Melodeon.net Forums
Discussions => Recordings and Videos => Topic started by: NeilA on July 19, 2010, 11:06:54 PM
-
Maybe some of you have already seen this from Charlie Marshall. Appears to be only one so far and his camera angles could be better! As I'm thinking of tinkering with an old box, I found this useful. Was not sure before how to go about waxing the reeds without making too much of a mess.
http://www.youtube.com/watch?v=q7-MUhBc1ho&feature=related (http://www.youtube.com/watch?v=q7-MUhBc1ho&feature=related)
-
Safety warning! Heating wax directly in an open pot on a gas burner, its a serious fire risk. If you must use a gas burner then at least use a pan of water to heat the wax pot in, that way the wax won't be able to get hotter than 100C
-
Thanks, good advice - don't want to burn the house down.
-
Many Italian makers use an electric hotplate set at around 1.5 on the dial.
A fume extractor is always employed.
-
I'm using a tjanting 'soldering' iron for waxing .. maybe a bit expensive but really easy to use:
http://www.stringsandboxes.de/epages/es117831.sf/en_GB/?ViewObjectID=15567640
-
Many Italian makers use an electric hotplate set at around 1.5 on the dial.
A fume extractor is always employed.
Fumes from heated rosin (aka colophony) are one of the biggest causes of occupational asthma. I was diagnosed with asthma a couple of years ago and I now realise that it is triggered by fumes from melted reed wax. Once you have developed this sensitivity you have it for life, so be careful. I now have a fume extractor which I use when doing any wax work (or when soldering - the flux in cored solder is also made from rosin). A new fume extractor typically costs about the same as a Hohner pokerwork, so is out of the question for most home repairers, but a good quality face mask with the correct type of filter is much cheaper. Or ensure that there is very good ventilation, and definitely make sure you do not have you face above the work where fumes can rise directly into your airway.
I had a miserable time with this before I was diagnosed, I would not like to think of anyone else suffering the same way.
-
use a pan of water to heat the wax pot in
agreed - also helps the wax in the pan stay 'wet' a wee bit longer once removed from the heat source. But thanks to Charlie for posting this very helpful video.
-
(...) that way the wax won't be able to get hotter than 100C
For as long as the flame is kept under control! Heat up the water until bubbles (of steam) start forming in the water, then turn the flame down as low as possible just to keep the water and wax near the water boiling point.
-
My recent wax making experiments were performed over the kitchen stove with extractor fan on, although this was more to remove the haze of steam, gas cooker controls are crude to say the least but a thick bottommed cast iron saucepan is good for evening out the peaks and troughs of a hunting governor!
Had I one available I would have done what my late pal the organ pipe maker did, he had a collection of ancient smoothing irons, inverted in little wooden cradles and powered through a thyristor controller like the one recently constructed for my soldering iron, on these sat various water bath gluepots containing various glues and sizes, one was also in perpetual use for his tea mug. Incidentally, a mutual friend who dropped in last night on seeing the iron controller said 'why didn't you just use a lighting dimmer?' - we don't have any in the house or in the workshop 'stores' so I looked in the hardware shop this morning, 250 and 400 watt mains dimmers for 6 or 8 quid ! would have saved me a couple of hours and my iron is only 20 watts.
Having been under the impression that the danger primarily came from resin heated to the point of vaporisation rather than just the smell of it when hot, (after all one of its uses is being burned in 'health improving' incenses which has to be worst case scenarion for the practicioner even if the patient exposure is minimal) in which case heating in a water bath or with a cool iron ought not liberate much as fume - or is that a too simplistic view?.
I'm sorry to hear that you have been 'got' by the fumes Theo, having suffered from allergic athsma since childhood I know it is no joke - thats why I started smoking my filthy old pipe and since then have only had two bad periods, one in the 70's when I was working in stained / leaded glass, with hindsight the fume from resin and perhaps tallow fluxes was the culprit, the second was more recently when I gave up the pipe, three awful summers and a lot of assorted pharmaceuticals later I started smoking it again.
Having looked for a means of removing solder resin fume at work we settled on some expensive units which incorporated an activated charcoal filter, bad enough to justify for an intermittent activity in a business let alone a hobby.
Richard
-
Having looked for a means of removing solder resin fume at work we settled on some expensive units which incorporated an activated charcoal filter, bad enough to justify for an intermittent activity in a business let alone a hobby.
I was fortunate in finding one in good condition on ebay for a fraction of the new price.
-
I was fortunate in finding one in good condition on ebay for a fraction of the new price.
Very fortunate find Theo (:)
I guess its variable but as a ball park how many hours a week might you have hot wax on the go ?
-
I can sometimes spend a couple of hours in one day on waxing, sometimes several times a week.
-
Yup, the exposure builds up in the course of a year :(
-
And in my case the asthma symptoms developed a few hours after the exposure, so the connection was not obvious, I just though I was suffering from recurring chest infections.
-
Does the volume of air through the charcoal filter give a complete cure Theo ?
(without having to wax with a force 9 gale trying to tear your face mask off.................................
I recall that exhaust to atmosphere, either dust or fumes, did not meet with universal agreement on another thread but for those of us doing a job intermittently, as a hobby, there's a lot to be said for an open window and door with a natural throughflow of air or a fan to move it out a bit quicker.
Bless those who suffer for others Art :-\