Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Reed waxing video  (Read 3088 times)

0 Members and 1 Guest are viewing this topic.

NeilA

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 247
  • Nuage C#D, Yvus Pyrenees DG, Hohner Preciosa EbBb,
    • youtube channel
Reed waxing video
« on: July 19, 2010, 11:06:54 PM »

Maybe some of you have already seen this from Charlie Marshall. Appears to be only one so far and his camera angles could be better! As I'm thinking of tinkering with an old box, I found this useful. Was not sure before how to go about waxing the reeds without making too much of a mess.

http://www.youtube.com/watch?v=q7-MUhBc1ho&feature=related
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed waxing video
« Reply #1 on: July 19, 2010, 11:35:54 PM »

Safety warning!   Heating wax directly in an open pot on a gas burner, its a serious fire risk.  If you must use a gas burner then at least use a pan of water to heat the wax pot in,  that way the wax won't be able to get hotter than 100C
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

NeilA

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 247
  • Nuage C#D, Yvus Pyrenees DG, Hohner Preciosa EbBb,
    • youtube channel
Re: Reed waxing video
« Reply #2 on: July 20, 2010, 07:06:54 AM »

Thanks, good advice - don't want to burn the house down.
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Reed waxing video
« Reply #3 on: July 20, 2010, 09:06:07 AM »

Many Italian makers use an electric hotplate set at around 1.5 on the dial.
A fume extractor is always employed.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

michik

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 412
Re: Reed waxing video
« Reply #4 on: July 20, 2010, 09:11:53 AM »

I'm using a tjanting 'soldering' iron for waxing .. maybe a bit expensive but really easy to use: 
http://www.stringsandboxes.de/epages/es117831.sf/en_GB/?ViewObjectID=15567640
Logged
Michael Knapp ~ Vienna ~ Austria
Playing on "Parigi Giovani" G/C (made by Bompezzo) - My recordings: http://www.onmvoice.com/mknapp

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed waxing video
« Reply #5 on: July 20, 2010, 09:27:10 AM »

Many Italian makers use an electric hotplate set at around 1.5 on the dial.
A fume extractor is always employed.

Fumes from heated rosin (aka colophony) are one of the biggest causes of occupational asthma.  I was diagnosed with asthma a couple of years ago and I now realise that it is triggered by fumes from melted reed wax. Once you have developed this sensitivity you have it for life, so be careful.  I now have a fume extractor which I use when doing any wax work (or when soldering - the flux in cored solder is also made from rosin).  A new fume extractor typically costs about the same as a Hohner pokerwork, so is out of the question for most home repairers, but a good quality face mask with the correct type of filter is much cheaper. Or ensure that there is very good ventilation, and definitely make sure you do not have you face above the work where fumes can rise directly into your airway.

I had a miserable time with this before I was diagnosed, I would not like to think of anyone else suffering the same way.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

HallelujahAl

  • Guest
Re: Reed waxing video
« Reply #6 on: July 20, 2010, 09:27:10 AM »

Quote
use a pan of water to heat the wax pot in
agreed - also helps the wax in the pan stay 'wet' a wee bit longer once removed from the heat source. But thanks to Charlie for posting this very helpful video.
Logged

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Reed waxing video
« Reply #7 on: July 20, 2010, 01:51:37 PM »

(...)  that way the wax won't be able to get hotter than 100C
For as long as the flame is kept under control! Heat up the water until bubbles (of steam) start forming in the water, then turn the flame down as low as possible just to keep the water and wax near the water boiling point.
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Reed waxing video
« Reply #8 on: July 20, 2010, 03:08:57 PM »

My recent wax making experiments were performed over the kitchen stove with extractor fan on, although this was more to remove the haze of steam, gas cooker controls are crude to say the least but a thick bottommed cast iron saucepan is good for evening out the peaks and troughs of a hunting governor!

Had I one available I would have done what my late pal the organ pipe maker did, he had a collection of ancient smoothing irons, inverted in little wooden cradles and powered through a thyristor controller like the one recently constructed for my soldering iron, on these sat various water bath gluepots containing various glues and sizes, one was also in perpetual use for his tea mug. Incidentally, a mutual friend who dropped in last night on seeing the iron controller said 'why didn't you just use a lighting dimmer?' - we don't have any in the house or in the workshop 'stores' so I looked in the hardware shop this morning, 250 and 400 watt mains dimmers for 6 or 8 quid ! would have saved me a couple of hours and my iron is only 20 watts.

Having been under the impression that the danger primarily came from resin heated to the point of vaporisation rather than just the smell of it when hot, (after all one of its uses is being burned in 'health improving' incenses which has to be worst case scenarion for the practicioner even if the patient exposure is minimal) in which case heating in a water bath or with a cool iron ought not liberate much as fume - or is that a too simplistic view?.

I'm sorry to hear that you have been 'got' by the fumes Theo, having suffered from allergic athsma since childhood I know it is no joke - thats why I started smoking my filthy old pipe and since then have only had two bad periods, one in the 70's when I was working in stained / leaded glass, with hindsight the fume from resin and perhaps tallow fluxes was the culprit, the second was more recently when I gave up the pipe, three awful summers and a lot of assorted pharmaceuticals later I started smoking it again.

Having looked for a means of removing solder resin fume at work we settled on some expensive units which incorporated an activated charcoal filter, bad enough to justify for an intermittent activity in a business let alone a hobby.

Richard
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed waxing video
« Reply #9 on: July 20, 2010, 03:21:55 PM »


Having looked for a means of removing solder resin fume at work we settled on some expensive units which incorporated an activated charcoal filter, bad enough to justify for an intermittent activity in a business let alone a hobby.


I was fortunate in finding one in good condition on ebay for a fraction of the new price.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Reed waxing video
« Reply #10 on: July 20, 2010, 03:33:29 PM »



I was fortunate in finding one in good condition on ebay for a fraction of the new price.

Very fortunate find Theo  (:)

I guess its variable but as a ball park how many hours a week might you have hot wax on the go ?

Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed waxing video
« Reply #11 on: July 20, 2010, 03:34:53 PM »

I can sometimes spend a couple of hours in one day on waxing,  sometimes several times a week.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Reed waxing video
« Reply #12 on: July 20, 2010, 03:38:29 PM »

Yup, the exposure builds up in the course of a year :(



Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed waxing video
« Reply #13 on: July 20, 2010, 05:44:57 PM »

And in my case the asthma symptoms developed a few hours after the exposure, so the connection was not obvious,   I just though I was suffering from recurring chest infections.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Reed waxing video
« Reply #14 on: July 20, 2010, 10:46:30 PM »

Does the volume of air through the charcoal filter give a complete cure Theo ?
(without having to wax with a force 9 gale trying to tear your face mask off.................................

I recall that exhaust to atmosphere, either dust or fumes, did not meet with universal agreement on another thread but for those of us doing a job intermittently, as a hobby, there's a lot to be said for an open window and door with a natural throughflow of air or a fan to move it out a bit quicker.

Bless those who suffer for others Art  :-\
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal