Melodeon.net Forums

Discussions => Other Free Reed Instruments => Topic started by: Adam-T on May 13, 2012, 09:29:31 PM

Title: Concertinas, Good Bad and the Ugly ?
Post by: Adam-T on May 13, 2012, 09:29:31 PM
I`ve got two Anglo 20 button concertinas - one is a wheezy wooden Scholer Klingenthal special, reliable wooden action, wheezy brass reeds on unified plates - it`s OK as a "tester", it`s not A440 pitched as they generally weren`t .. (as it happens, I`m selling for what I paid for it which was £35)

Second is a Scarlatti unbadged Chinese - it`s the total opposite of the Scholer, it`s far from wheezy, it`d keep up with a castagnari Lily in sheer volume but the button action & pallet lever system is Rubbish, thin alloy levers and wobbly buttons on even thinner alloy with rubber buffers, when they move about the pallets can be held open .. I got it as a swap for my underplayed Mando, the box was nearly new and they cost £100 new, I`d not have the heart to sell it to someone now, I tried a new one in a shop and it was the same

So what am I getting at ...... It`s easy to get a well playable Melodeon for far less than £100 - you can even get a Hohner 1 row if you`re lucky and don`t mind it looking like it`s been to beirut and back , Heck a 2 Row even from Germany so long as you don`t mind C/F  ! . but Concertinas seem dispropotionally priced . £100 gets you Nothing, a used low end Stagi if you`re very lucky and at the other end you`d be lucky to get a Jeffries for the price of a Shand Morino .. WHY do they cost so much, new AND used for such a basic instrument (the cheapos don`t use complex reed-Pans)  ? .

I`ve got a Stagi coming as a third go at getting a 20 button Anglo 'Tina - I`m hoping it`s going to have the sound of the Chinese and the relaibility of the Scholer, sell the Scholer and write the crappy Scarlatti off to experience - it`s full of Melodeon reeds on wooden reed blocks which may find their way into something else such as my toy melodon which has slow reeds..

Is the Stagi any good, it IS Italian and the wooden rather than the plastic one .
Title: Re: Concertinas, Good Bad and the Ugly ?
Post by: malcolmbebb on May 13, 2012, 11:03:52 PM
I think you've answered your own question - you got a playable concertina for £35.

You'd struggle to get a playable DG melodeon for that, you might get a beat up German C/F but you won't get carriage let alone bank charges out of it (and the ones at that price are rarely Paypal).

A playable - albeit just - 20b Lachenal from Ebay, more usable than your "Beirut" one-row, is about achievable for your £100 if you're patient and a used Rochelle should come in at £200 or less.

You could ask the question on C-Net >:E - or just just hold a really nice concertina in your hands and play a few notes, say a new Dipper, and you wouldn't ask again.
Title: Re: Concertinas, Good Bad and the Ugly ?
Post by: Chris Ryall on May 14, 2012, 07:20:29 AM
Concertinas have sort of gone bonkers over the last 30 years. I sold my Wheatstone Linota "to a good home" in 2004 and used the proceeds to pay down mortgage (I kid you not) on the old family house.

A year later Gaillard accepted the €150 I had in my pocket as a starter deposit and I eventually paid for my Saphir by selling the old pile and moving to a flat. OK, 3 row Gaillards ain't cheap either, but that little concertina I'd paid a few hundred for had ended up at the sort of sum you'd more commonly talk to Building Societies about  ???

Sort of makes you realise you are on the right instrument?  ;)

I'd consider a Lily if you like that sort of sound.  Was my first proper melodeon and I had so much fun with it.
Title: Re: Concertinas, Good Bad and the Ugly ?
Post by: Adam-T on May 14, 2012, 07:48:14 AM
Thanks for your thoughs folks, I have to be honest that i`ve not seen an even remotely playable Lachenal for £100 on E-Bay, just a few Rotters which look salvagable at best since I`ve been looking (about 3 or 4 months), As for £35 Concertinas Vs Melodeons - I`m selling a Worldmaster 1 row in C which is both more playable AND sounds a whole lot better than the Scholer for £50 ONO delivered within the UK (accounting £10 for delivery, £5 off for the ONO = £35)... as for Rochelle, aren`t they chinese like the Jackie and Jack ? . Hmmm, they all look a lotta money for what they are . I`ll hold off asking on C net Malcolm - LOL

Chris, I can believe a collectable wheatstone could lay down a good sized mortgage payment just like a classic Jeffries would get you a Tidy Shand Morino AND another New Lily - talking of the Lily, I`d love one, just haven`t got or can justify in playing abilty over £1000 to get one  :( . All I wanted was to have a good stab at getting a playable concertina for battered hohner 1040 money . I`m sorry but I can`t see how any Concertina can be worth more than a Shand, a new Handry or higher end Excelsior or Pigini PA unless it was owned by Prince Albert himself .

Title: Re: Concertinas, Good Bad and the Ugly ?
Post by: Prestidigitator on May 14, 2012, 08:21:43 AM
I think you're a little unfair on the Rochelle. I had one for a while, and whilst it's no Crabb or Wheatstone (or other new makers' instruments like Norman, Marcus, the top range Wakkers etc.) it costs a fraction of the price and plays quite well enough for a beginner or progressing player.

It wasn't the Rochelle's fault that, having played melodeons since about 1968, I couldn't readjust to the fingering techniques, gave up and sold it on; as it happens, for about the same I paid for it from the Music Room.
Title: Re: Concertinas, Good Bad and the Ugly ?
Post by: Howard Jones on May 14, 2012, 09:08:34 AM
With respect, whether or not you think a concertina is worth more than a melodeon is irrelevant - the market says they are.  As with everything, it's a question of demand and supply.  Melodeons are mass-produced, and have been for decades, and in addition there are huge numbers of playable second-hand instruments.  There are also plenty of reed-makers turning out high-quality accordion reeds by the bucket-load, so even the craftsman melodeon makers buy in the reeds.  Reeds are the most expensive component and hand-making the reeds (which are different from accordion and melodeon reeds) makes up a significant proportion of the cost of a concertina.

Demand for anglo concertinas in particular, and specifically Jeffries instruments, has been boosted by the explosion of interest in the instrument for Irish trad, and as a result silly prices are being paid.  But at all levels, you pay for the relative scarcity.  You can go into a music shop and buy a melodeon off the shelf - you'll be lucky to do that if you want a concertina. 

Concertinas are more complex instruments, and (apart from some low-end instruments of variable quality) aren't being mass-produced.  If you want a new one, there are only a handful of makers.  There are something like 4000 parts in a concertina and in most cases these are all hand-made, including the reeds.  So to get hold of a new high-quality instrument you're going to have to pay a commensurate price, and probably go on a lengthy waiting list.  There are makers of so-called "hybrid" concertinas, which use accordion reeds, and these are in the same price range as a middle-quality melodeon -roughly £1000-£2000.  However they have a different sound from true concertina reeds.

However I think you're setting the bar very low at £35 and I doubt you'll find many playable melodeons at that price.  I don't think it's fair to compare a one-row with a concertina, as even a 20-button 'tina offers more flexibility.  For around the price of a pokerwork it's quite possible to find playable concertinas.

Title: Re: Concertinas, Good Bad and the Ugly ?
Post by: Mike Hirst on May 14, 2012, 09:42:42 AM
My dad bought his first concertinas c.1960 paying a guinea (21/-) for one and 20/- for the other. I'm not sure what a melodeon would cost at that time, but I would imagine some sort parity. By the late seventies, when I started playing, costs had diverged radically. I started out playing a 20 button anglo. When we looked for an upgrade we found that a decent playable 30 key anglo would cost c. £300.00, but a brand new Hohner 4 stop cost £67.00. More than 30 years on, we still see the equivalent disparity.

I recently got an itch for an anglo. I bought a 20 key lachenal, paying perhaps slightly more than the market value, but nothing excessive. I spent a month or so relearning the instrument. Working hard to get the best out of it. I can honestly say that I found the experience deeply disappointing. I found nothing on the anglo that I could not do better on the melodeon. That is not to say that there are some very fine players out there and some very fine instruments. It is my opinion that a unless you are prepared to invest something in the region of £1500-£2000 you will not get a quality of sound to approach the sound you could expect from a melodeon at half that price.

If your interested in playing a single reed instrument without breaking the bank I'd suggest a good single row played with only one stop raised. I use this setting myself sometimes, but if you want to see a true master at work I'd point you in the direction of Dave Hennessy (Any Old Time):

http://youtu.be/IRGN6ri_rUk

BTW I'd also like to add Dave Hennessy to my list of influences. We played a session together at Nantwich Folk Festival c.1983. You'd have to travel a long way to hear music better than that played on that afternoon.  ;)
Title: Re: Concertinas, Good Bad and the Ugly ?
Post by: Adam-T on May 14, 2012, 11:00:15 AM
Thanks again folks, I`ll see how the Stagi pans out, sell the Scholer for what I Paid and your idea of a 1 row running on 1 reed bank sounds good Mike, hasn`t that 114 you`re selling got just that ability (with a choice of L, M or H too :)

Sorry Howard but Personally I find the thought of £1000-2000 for a concertina made from Melodeon bits quite excessive, I`d have guessed that kind of price for one made from proper concertina parts (reed-pans, tina reeds etc) ..

Anyway as you say, my opinion on what concertinas should cost is irrelevant to the outcome apart from that I`ll never own anything worthy of posting on Tina-net but it goes some way to explaining the lack of popularity of the instrument especially after playing the Ubiquitous £120 red pearloid Chinese horror, likely where most will start out..

Yes I did think of fitting the actually decent reedblocks from the Scarlatti into the relaible scholer but it`s not viable without making some new very clerverly designed reedblocks
Title: Re: Concertinas, Good Bad and the Ugly ?
Post by: Howard Jones on May 14, 2012, 01:25:07 PM
Sorry Howard but Personally I find the thought of £1000-2000 for a concertina made from Melodeon bits quite excessive, I`d have guessed that kind of price for one made from proper concertina parts (reed-pans, tina reeds etc) ..
These instruments are not made "from melodeon bits".  They are made by craftsmen using concertina techniques.  The only difference is with the reeds (and of course the reed-pans), where instead of using concertina reeds they use high-quality accordion reeds (better than you'll get in a £35 melodeon, I'd guess), which are readily available and a lot cheaper than making concertina reeds by hand.

http://www.concertinas.ca/construction.html
http://www.marcusmusic.co.uk/concertinas.html

The difference can be illustrated by the threads about melodeon-building courses.  A novice, albeit under expert instruction and with some assistance, can build an excellent melodeon from scratch in less than a week.  Of course, a number of the components can be bought ready-made as they are manufactured for the accordion industry.   Even an experienced concertina maker will take several weeks to make an instrument - Wim Wakker (who uses traditional concertina reeds) estimates 8-12 weeks.  Prices reflect this - you won't get a new traditionally-made concertina for less than £3000, and you'll have to wait for it - but a craftsman is worthy of his hire, as they say.

I think the mistake is to think of concertinas and melodeons as substitutes for one another.  They are not, any more than a violin is substitute for, say, a flute.  They are alternatives - different instruments, with different sounds (a single-reed melodeon produces a different sound from a concertina), and more importantly different capabilities.  The reason I play both is that I can do different things with the different instruments.

It is indisputable that melodeons are cheaper than concertinas.  On the other hand, melodeons are more expensive than mouth-organs. For the price of a new pokerwork you can get a decent guitar or violin.  If your concern is to get the best sound for your money, then a melodeon certainly offers better value than a concertina, but you could get other instruments for even less.  However we choose an instrument for a variety of reasons, of which cost is just one (albeit an important one!).
Title: Re: Concertinas, Good Bad and the Ugly ?
Post by: Adam-T on May 14, 2012, 04:02:38 PM
I think the problem remains that the only tinas I`ve seen that you can walk into a regular music shop like Dawsons, Back alley etc and buy are of the same type as my Chinese disaster - unreliable and crude for hardly pocket money (£130) , the next step up are the £300+ ones from Jackie and Stagi ..

I`ll pass judgement on the used Stagi 20 button when it arrives , they were about £150-£200 if I remember new but don`t seem to be available in the UK now - Thomann in Germany may stock them. I`m really hoping the reliability is at least as good as the wooden action Scholer.
Title: Re: Concertinas, Good Bad and the Ugly ?
Post by: Howard Jones on May 14, 2012, 07:22:31 PM
I think the problem remains that the only tinas I`ve seen that you can walk into a regular music shop like Dawsons, Back alley etc and buy are of the same type as my Chinese disaster - unreliable and crude for hardly pocket money (£130) , the next step up are the £300+ ones from Jackie and Stagi ..

That's the point I was making earlier. However a regular music shop is not the place to look for a concertina, you'll do better going to a specialist dealer. Even these may not have what you want in stock.  The simple fact is that concertinas are relatively scarce, they are complex and expensive to make, and there isn't the volume of demand to justify mass-producing them at reasonable standards of quality.  We're left with a few types of basic and fairly crude mass-produced foreign imports, and even they are hardly cheap, or hand-made instruments (with or without traditional concertina reeds) which are commensurately expensive, or a fairly small pool of second-hand instruments of all qualities.

This issue has been bemoaned frequently and at length on concertina.net.  The price of instruments, and in particular playable entry-level instruments, is a significant barrier to new players, and it is unsurprising that many will turn instead to the melodeon.  However the melodeon (excellent instrument though it is) is not a concertina and cannot do the things a concertina can.

One more point - my concertina, hand made by one of the most reputable makers, cost only a few hundred pounds more than the current retail price of my melodeon.  They are both very good instruments, but the quality of workmanship and sound from the concertina far exceeds the melodeon and was undoubtedly worth the (proportionately small) extra cost.  If I was forced to choose between them (which I hope I never have to) it would have to be the concertina.

However that is at the upper end of the market for both instruments.  At the price levels you're talking about, less than £100, it's virtually impossible to find a playable concertina, but I'd also say you'd have to be lucky to find a melodeon which is playable without some work.

Title: Re: Concertinas, Good Bad and the Ugly ?
Post by: oggiesnr on May 15, 2012, 07:30:04 AM
I've recently cut a pair of concertina ends for someone.  I'm an experienced fretworker (it's my job) and they took me ten hours.  OK, I could  probably have cut two pairs at once so that would be five hours an instrument.  Work out the cost of that at a craftsman's rates, reckon it's one of the quicker/easier parts of making a concertina and it's quite clear why they are that expensive for a quality instrument.

Personally I don't think concertinas are outrageously expensive, they're out of my price range but so is a fifty year old Martin guitar.

For a bit of perspective, I visited the Contrabass Shoppe to have a look at a new Double Bass.  Their cheapest beginner bass was £2,600, after that they just went up and up.  Their quality instruments are mainly in five figures and their Jefferies equivalent?  "If Sir has to ask the price, Sir can't afford it"  (:)

Mind you my niece has just paid several thousand pounds for a violin bow!

Steve


Title: Re: Concertinas, Good Bad and the Ugly ?
Post by: Chris Ryall on May 15, 2012, 08:16:24 AM
Stage Impro in France attracts increasing numbers of bass clarinettists, all keen to learn from Mâitre J-P Sarzier. I think there were five last time. I think you can get something for under £1000, but all the better players I've inquired from had paid £7-8k.   

Melodeons are relatively cheap!  ::)
Title: Re: Concertinas, Good Bad and the Ugly ?
Post by: IanD on May 15, 2012, 10:38:07 AM
When Crabb made Hilda's G/D 38-key baritone Anglo in (I think) 1980 it cost £1000. During many long conversations with Neville he said that they couldn't keep the business going on new concertinas because they were too cheap for the amount and time and effort needed to build them, and the only thing that kept Crabb solvent was repairs.

Given this fact -- and I don't things have changed since then given inflation, which would put this price at around £4000 today -- it's difficult to see how anyone could think that new "hand-made" concertinas (with concertina-type reeds) are overpriced.
Title: Re: Concertinas, Good Bad and the Ugly ?
Post by: Adam-T on May 15, 2012, 10:58:37 AM
Quote
Given this fact -- and I don't things have changed since then given inflation, which would put this price at around £4000 today -- it's difficult to see how anyone could think that new "hand-made" concertinas (with concertina-type reeds) are overpriced.

I guess I was putting more value on the soundmaking side of it as a musical instrument rather than as a piece of engineering and artwork - I didn`t realise so much went into them - it doesn`t excuse the price of the Jackies etc which are just stamped out parts in china, to be honest, the £100 scarlatti would be OK as a beginners instrument if they Stamped out the lever mechansim from steel instead of coke tin aluminium and fixed the button shafts to the arms (can`t add that much to the cost surely, its only a 20 key anglo)..

you never know the Stagi may be the ideal balance in a sub £200 Anglo , if it is then fine, though they only seem available from Thomann with the thomann badge on . again, if it is then Dawsons etc need to stock it in place of the red horrors from China

The insides of the Reliable Scholer - all it needs is a reedblock of the cheapest chinese decent sounding Reeds  ... and the unreliable action of the scarlatti . before someone says "what do you expect for £100", remember that you can get a toy 1 row melodeon with the same individual plate reeds from Home Bargains for A TENNER which is far more reliable than the chinese Anglo !



Title: Re: Concertinas, Good Bad and the Ugly ?
Post by: waltzman on May 15, 2012, 01:15:32 PM
- it doesn`t excuse the price of the Jackies etc which are just stamped out parts in china,

Not sure why the slam on the Jackie.  The Jackie was the first decently made affordable english concertina for beginners....better than the Stagi at less than half the cost.  It has a nice riveted post and lever action and decent reeds.  I have one of the first ones made and have had no trouble with it all.  Truth be known, I like the timbre of it better than my Edeophone and I still play it.  Check out the opinions on it at concertina.net.
Title: Re: Concertinas, Good Bad and the Ugly ?
Post by: malcolmbebb on May 15, 2012, 01:24:25 PM
I think the wooden German actions are brilliantly engineered for their purpose - cheap, simple, reliable (apart from buttons falling off), repairable, and do the job. But their purpose was cheap export boxes not designed to take heavy use.

The actions in the Concertina Connections boxes (Jackie, Rochelle etc) are significantly better than the cheap generic Chinese units, and are a bit closer to the better quality English/Anglo actions (although personal experience only extends to dismantling my Rochelle). These are probably not good boxes to illustrate nasty, cheap manufacture as they are generally well considered for beginner's units. But they are that bit more expensive, £400 or so for a new Rochelle when I last looked.

Loads of us have the little plastic toy melodeons, and there are whole threads devoted to overcoming their shortcomings and making them playable. They are good value for toys, but have other major shortcomings (notably bellows). In addition they only have seven treble buttons and two bass, in addition to the generally superfluous air button, whereas nearly all concertinas have 20+.
(Actually ten quid is a pretty good price for them, since they are normally around 25 (not that that changes the argument)  and apparently in stock, too.)
But would you choose one for your main box?

But as Howard pointed out, comparing concertinas with melodeons is not comparing like with like. Quite a few here play (or are learning  ::) ) both, which would make no sense if they were otherwise interchangeable. And people are prepared to pay for a new concertina a sum that would buy two top of the range melodeons, so there has to be something there.
Title: Re: Concertinas, Good Bad and the Ugly ?
Post by: Anahata on May 15, 2012, 02:01:33 PM
I've recently cut a pair of concertina ends for someone.  I'm an experienced fretworker (it's my job) and they took me ten hours.

Nick "Chalky" Whiteley, a melodeon player from near Chelmsford, is a metal worker by trade, and the other day he showed me some stuff he'd made by laser cutting. I wonder if that's a feasible process for concertina ends (it makes beautifully clean cuts). I've gotta ask him...
Title: Re: Concertinas, Good Bad and the Ugly ?
Post by: Adam-T on May 15, 2012, 02:06:18 PM
Ahh well, we all have our views and opinions of what represents value, I`m not passionate about concertinas as many obviously are (I like them well enough though).. someone who is will obviously see more value in something they love and play as their main instrument.
Title: Re: Concertinas, Good Bad and the Ugly ?
Post by: Howard Jones on May 15, 2012, 02:07:52 PM
I've recently cut a pair of concertina ends for someone.  I'm an experienced fretworker (it's my job) and they took me ten hours.

Nick "Chalky" Whiteley, a melodeon player from near Chelmsford, is a metal worker by trade, and the other day he showed me some stuff he'd made by laser cutting. I wonder if that's a feasible process for concertina ends (it makes beautifully clean cuts). I've gotta ask him...

I believe Wim Wakker uses CNC alongside more traditional techniques
Title: Re: Concertinas, Good Bad and the Ugly ?
Post by: oggiesnr on May 15, 2012, 02:40:40 PM
I've recently cut a pair of concertina ends for someone.  I'm an experienced fretworker (it's my job) and they took me ten hours.

Nick "Chalky" Whiteley, a melodeon player from near Chelmsford, is a metal worker by trade, and the other day he showed me some stuff he'd made by laser cutting. I wonder if that's a feasible process for concertina ends (it makes beautifully clean cuts). I've gotta ask him...

It is feasible.  It works better on metal than wood because with wood you get a burnt edge.  The catch is in the design process.  Most laser cutters use CorelDraw to control the cut. However you cannot just scan in a design as a JPEG or GIF, it has to be a vector and that takes time.  It's best suited to mass production, for one-offs the set up time can eat up the time saving on the cutting.

The big advantage of a laser is that you can set the thing running and get on with something else.  The downside is the original cost of the machine.  You have to do a lot of work to justify a sensibly powered laser (to cut 1/8th stainless you need around 400watts).  The 100 watt one I've been looking at is £33,000 plus VAT!

Steve
Title: Re: Concertinas, Good Bad and the Ugly ?
Post by: baz parkes on May 15, 2012, 05:37:08 PM
The 10 watt one I've been looking at is £33,000 plus VAT!
Steve
[/quote

Nearly as much as a Jeffries... >:E >:E >:E

Baz
Title: Re: Concertinas, Good Bad and the Ugly ?
Post by: Fidjit on May 15, 2012, 06:18:23 PM
Prices. prices. You pay for what you get.

Very glad I bought my (1895) Lachenal in 1972 for £50. Thank you Neil Wayne.

Have had it tuned and re bellowed. Thank you Chris. Plus I've tinkered with it myself a bit too. (I've been on a course)
Think I can add a nought now.

I certainly wouldn't want to part with it.  :|glug
Title: Re: Concertinas, Good Bad and the Ugly ?
Post by: Owen Woods on May 17, 2012, 01:08:27 AM
I've recently cut a pair of concertina ends for someone.  I'm an experienced fretworker (it's my job) and they took me ten hours.

Nick "Chalky" Whiteley, a melodeon player from near Chelmsford, is a metal worker by trade, and the other day he showed me some stuff he'd made by laser cutting. I wonder if that's a feasible process for concertina ends (it makes beautifully clean cuts). I've gotta ask him...

Definitely. Waterjet (for metal) is also possible. There are often small scale producers around and about willing to do small runs if you pay them right. But a laser which will cut through metal will cost you. One that will cut through wood (a la Bergflogt) is a lot cheaper - I think that the one that he has is around £7000. I looked it up. I want one.
Title: Re: Concertinas, Good Bad and the Ugly ?
Post by: ceemonster on May 17, 2012, 04:57:19 AM
[So what am I getting at ...... It`s easy to get a well playable Melodeon for far less than £100 - you can even get a Hohner 1 row if you`re lucky and don`t mind it looking like it`s been to beirut and back , Heck a 2 Row even from Germany so long as you don`t mind C/F  ! . but Concertinas seem dispropotionally priced .]

i have been the Big Bad Bomb-thrower on just this very point on the concertina site..... >:E    i should say that i love the concertina, and am lucky enough to have a very nice Anglo, which cost in the price range of a new one by the current makers of concertina-reeded instruments (and was made by one of the contemporary makers, though I bought it used).  but over time i have come to feel that i am not sure you are getting a lot of instrument, or a lot of musical or expressive scope, for that kind of money.  for what you get MUSICALLY, i would feel more comfortable at, say, $2500 dollars for a superbly fast, playable instrument with top-class reeds. accordion reeds, i wouldn't mind. but top-class reeds and super-fast action.   maybe $3000.  i have come to feel that $6000 to $8000 is a lot of money for an instrument that won't play effectively in all keys, and won't do chords effectively in all the keys it does play melodies effectively in.

going even more to extremes, my very nice Anglo concertina, was about half the price of a vintage Jeffries, and less than half the price some Jeffries are rumored to go for on occasion.  and i have come to feel even more strongly about the Jeffries price range ($9,000 to allegedly $14,000 on occasion) not being anywhere I ever would care to go for what you get MUSICALLY.  i actually think there was kind of a Concertina Bubble, not only about prices for vintage concertinas, but in the way people thought about paying this price for instruments of this scope, when times were flusher and cash was more plentiful. 

so yes, i agree with you. one should be able to get an extremely playable starter's instrument for no more than $,1000.00, preferably $500 to $600.  [cheaper than that would be tough due to the sheer number of parts and the mechanism involved].    and given how limited the instrument is in terms of what you can do with it, you should be able to get an extremely fast, extremely responsive, pro-grade instrument for $2500-3000.  [again--lower than that, you probably can NOT get for a really good one, because the sheer number of parts, and the sheer labor-hours required to construct them].

a castagnari lilly is probably a better return on the money.  and a compact single-voice CBA can be had cheaper than a Lilly, and will do vastly, vastly more musically than either a two-row melodeon or a concertina.   the cba has become my main instrument because of all of this.

but i still love concertinas..... :||:

Title: Re: Concertinas, Good Bad and the Ugly ?
Post by: Adam-T on May 17, 2012, 07:36:43 AM
Beginner wise, all it would need is the Scarlattis and other £100 chinese 20 button pearloid anglos' actions to be made well enough for the buttons not to wobble and jam the pallets open all the time and Bang, a playable, loud Tina which doesn`t sound half bad for a price which would entice people to give it a go - heck you can buy a borderline playable PA with 8 bass for £35 NEW (they DO work as do the £10 melodeons if you squeeze fast enough)  .

these are £35 new, and are reliable apparently

http://www.youtube.com/watch?v=uMw7YplUbAM
Title: Re: Concertinas, Good Bad and the Ugly ?
Post by: Theo on May 17, 2012, 08:12:17 AM
these are £35 new, and are reliable apparently

http://www.youtube.com/watch?v=uMw7YplUbAM

The Chinese have a huge enthusiasm for accordions,  I suspect that if they produced even cheap toy models with sticking keys and leaky bellows then they would loose their home market.   As far as I know there is no mass market for concertinas within China, so they don't have the same incentive to get it right.
Title: Re: Concertinas, Good Bad and the Ugly ?
Post by: Chris Ryall on May 17, 2012, 08:19:21 AM
Could you perhaps rephrase that,  Theo  ???
Title: Re: Concertinas, Good Bad and the Ugly ?
Post by: Theo on May 17, 2012, 08:25:23 AM
Could you perhaps rephrase that,  Theo  ???

Re-phrase what?  Have I inadvertently insulted the Chinese? ;D
Title: Re: Concertinas, Good Bad and the Ugly ?
Post by: ceemonster on May 17, 2012, 09:34:17 AM
[Beginner wise, all it would need is the Scarlattis and other £100 chinese 20 button pearloid anglos' actions to be made well enough for the buttons not to wobble and jam the pallets open all the time and Bang, a playable, loud Tina which doesn`t sound half bad for a price which would entice people to give it a go - heck you can buy a borderline playable PA with 8 bass for £35 NEW (they DO work as do the £10 melodeons if you squeeze fast enough)]

you may be right. i may be wrong that it would be hard to make a good beginner instrument for much under $1000. i actually purchased a chinese EC about eight months ago to try the EC experience---it was a 48-button at that, for about $350.  and you know, it was not that far from being very serviceable.  i don't think it was that far from jackies. not up to where it should be--the accidental rows were either bad reeds or badly-fit reeds and hard to get sound from.  the center "white-key" rows responded and sounded like jackies.  really, the chinese are "this close" to making a very playable EC 48 for a cheap price, which is astounding.......
Title: Re: Concertinas, Good Bad and the Ugly ?
Post by: malcolmbebb on May 17, 2012, 09:35:45 AM

a castagnari lilly is probably a better return on the money.  and a compact single-voice CBA can be had cheaper than a Lilly, and will do vastly, vastly more musically than either a two-row melodeon or a concertina.   the cba has become my main instrument because of all of this.

Would it not be more logical to compare your CBA to a Duet concertina than to either two row melodeons or concertinas, which are not aimed at the same use? Even vintage duets are (like for like) cheaper than Anglos, new ones (admittedly hybrid ::)) are available eg Concertina Connection, look nicer, won't give you a hernia, don't need a small truck to move around and will hold their value much longer >:E.
Title: Re: Concertinas, Good Bad and the Ugly ?
Post by: Andy Simpson on May 17, 2012, 02:02:02 PM
For anyone who thinks old concertinas are overpriced...

http://www.ebay.co.uk/itm/VINTAGE-1964-GIBSON-ES-335-TDC-100-ORIGINAL-ORIGINAL-STOP-TAILPIECE-/190666126276?pt=Guitar&hash=item2c649633c4

...you could have an armload of Jeffries anglos for that....
Title: Re: Concertinas, Good Bad and the Ugly ?
Post by: Theo on May 17, 2012, 02:14:31 PM
not just instruments!

On a recent antiques roadshow they put a value if £2000 on a Victorian corkscrew! I ask you - a corkscrew :o
Title: Re: Concertinas, Good Bad and the Ugly ?
Post by: Chris Ryall on May 17, 2012, 03:08:49 PM
Agree Theo, ridiculous price!   ::)

One suspects it might have gone for even more had
they managed to get that bottle of '61 Lafite off it  :|glug
Title: Re: Concertinas, Good Bad and the Ugly ?
Post by: Adam-T on May 17, 2012, 03:19:07 PM
For anyone who thinks old concertinas are overpriced...

http://www.ebay.co.uk/itm/VINTAGE-1964-GIBSON-ES-335-TDC-100-ORIGINAL-ORIGINAL-STOP-TAILPIECE-/190666126276?pt=Guitar&hash=item2c649633c4

...you could have an armload of Jeffries anglos for that....

Wooooha -  you could get Jimmy Shand`s actual own Morino, Charles magnante`s Excelsior and maybe even the Actual Penguin of Death Pokerwork for that !

Oh and Chris, you`ll probably get a Turboting on Corkscrew.net for that comment
Title: Re: Concertinas, Good Bad and the Ugly ?
Post by: Steve C. on May 17, 2012, 04:53:17 PM
A couple of years ago I watched Morse concertinas being built.  As a few posters have stated, there are (almost) millions of tiny parts inside, all hand manufacturing, practically nothing automated.  Even the bellows are hard to make.

In the States, a Morse (lower end models) goes for a bit more than a Lilly, I would guess the handwork being the difference.

Now, by the pound, the Lilly is a lot of box for the money.  The Lilly is a nicely made, but factory, instrument.  I would call it very nice, but not artisan work.
Title: Re: Concertinas, Good Bad and the Ugly ?
Post by: Lester on May 17, 2012, 05:21:34 PM
<snip>
 and maybe even the Actual Penguin of Death Pokerwork for that !
</snip>

Doubt it :-)
Title: Re: Concertinas, Good Bad and the Ugly ?
Post by: oggiesnr on May 17, 2012, 09:56:38 PM
I've recently cut a pair of concertina ends for someone.  I'm an experienced fretworker (it's my job) and they took me ten hours.

Nick "Chalky" Whiteley, a melodeon player from near Chelmsford, is a metal worker by trade, and the other day he showed me some stuff he'd made by laser cutting. I wonder if that's a feasible process for concertina ends (it makes beautifully clean cuts). I've gotta ask him...

Definitely. Waterjet (for metal) is also possible. There are often small scale producers around and about willing to do small runs if you pay them right. But a laser which will cut through metal will cost you. One that will cut through wood (a la Bergflogt) is a lot cheaper - I think that the one that he has is around £7000. I looked it up. I want one.

He's cutting through thin wood that won't be seen so the burn line doesn't matter.  More realistically I reckon about £12,500 gets you one which will cut the thicker wood for the ends but you do have the burn issue.

For metal you can also use a plasma cutter.

Again for small runs (and singles) you can find shops that will do them BUT my comment about the design format comes into play.  Producing the cutting file can be very time consuming and it's an acquired skill set.  I can do it but I find it easier to produce a graphic file and "print and stick" which is what I think they did on the Melodeon making courses.

Steve

Added - you can actually use a water cutter on wood, the world's smallest jigsaw is made that way.  It's also how MacDonalds used to cut their breadcakes in half!
Title: Re: Concertinas, Good Bad and the Ugly ?
Post by: Owen Woods on May 17, 2012, 10:39:53 PM
He's cutting through thin wood that won't be seen so the burn line doesn't matter.  More realistically I reckon about £12,500 gets you one which will cut the thicker wood for the ends but you do have the burn issue.

For metal you can also use a plasma cutter.

Again for small runs (and singles) you can find shops that will do them BUT my comment about the design format comes into play.  Producing the cutting file can be very time consuming and it's an acquired skill set.  I can do it but I find it easier to produce a graphic file and "print and stick" which is what I think they did on the Melodeon making courses.

Steve

Added - you can actually use a water cutter on wood, the world's smallest jigsaw is made that way.  It's also how MacDonalds used to cut their breadcakes in half!

Ah true, wooden ends for a concertina are pretty thick. And I dunno, I've used SolidWorks and ProEngineer to make 3D models, I would find it a lot quicker and easier to create a design using them than I would with any other graphics program. That is what is done for the CAD/CAM stuff that goes on in my department, although I've never actually had any of my stuff made (aside from some stuff on a 3D print machine, which is amazing).

Didn't know that you can use a water cutter on wood, I suppose I presumed that liberally soaking a piece of wood would be counter-productive.
Title: Re: Concertinas, Good Bad and the Ugly ?
Post by: Chris Ryall on May 18, 2012, 08:00:48 AM
Sounds another case for "21st century box" thinking.   While sanded back wood is lovely it isn't strong and we've all seen badly chipped ones.

I guess nowadays it'd be a wood/carbon fibre laminate, plasma/whatever cut and then the wood side reduced to a couple of mm with a laser controlled power sander/router?  Colin Dipper told me he experimented with several 'ends' materials in the 90's - aluminium springs to mind - but he seems to have gone back to wood and german silver.   
Title: Re: Concertinas, Good Bad and the Ugly ?
Post by: ceemonster on May 18, 2012, 11:19:28 AM
[Would it not be more logical to compare your CBA to a Duet concertina than to either two row melodeons or concertinas, which are not aimed at the same use?]

i also referenced castagnari Lillys as probably being a better return for the money.  single-reed bisonoric instrument, superbly made, hand reeds, weighs about 3.5 pounds. costs about half what a newly-made concertina-reeded anglo costs, and about a quarter of a jeffries.

as for mentioning cba or duets, they're only "not aimed at the same use" if you are thinking rigidly about what they are used for.  (different issue, i'll grant, as to whether you have a strong preference for bisonoric articulation versus unisonoric.)  but unisonoric concertinas and cbas can be used to play the same music you play on anglo concertina or bisonoric melodeon.  compact single-voice cbas weighing just under  10 pounds, no hernias involved, can be had from $1000 to $2000, and you can play polkas or jigs and reels on them, but much, much more as well on top of that.  they articulate irish or other folk dance genres very authentically, they just articulate it in the manner of other air-driven but non-back-and-forth folk instruments such as flute, whistle, or pipes.  if you can live with that, a compact single-voice cba is a very, very good deal.  duets....i'm fascinated by them and would like to have one, but those prices are a-rising.

i'm not making an argument against anglo concertinas in any general sense. i like them.  i'm saying, the price tags on them are very high indeed for the musical scope they offer.
Title: Re: Concertinas, Good Bad and the Ugly ?
Post by: waltzman on May 18, 2012, 02:01:59 PM
The argument that a CBA (or a PA) offers much greater musical scope for less money is a seductive one but the fact remains that it is extremely difficult to play jigs and reels on these instruments with any where near the energy and lift you can get out of a melodeon.  Melodeons are very effective for what they are designed for and surprisingly versatile if you are not hung up on playing in a lot of different keys.
Title: Re: Concertinas, Good Bad and the Ugly ?
Post by: Quebecois on May 18, 2012, 02:53:09 PM
Technically PA's and CBA's are NOT "accordions"! The word accordion was invented because the diatonic instrument plays notes "in accord" when squeezing or pulling on the bellows. Depress several buttons on the same row and the corresponding bass buttons and everything is in the same key when you squeeze or draw the bellows.

Not so with a PA or CBA!
Title: Re: Concertinas, Good Bad and the Ugly ?
Post by: Theo on May 18, 2012, 03:16:24 PM
That may have been the case in the mid 19th century when the instrument and the word were invented but both instruments and language have moved on a tad in the intervening century and a half ;)
Title: Re: Concertinas, Good Bad and the Ugly ?
Post by: oggiesnr on May 18, 2012, 06:28:12 PM

Didn't know that you can use a water cutter on wood, I suppose I presumed that liberally soaking a piece of wood would be counter-productive.


So is setting it on fire if you think about it  (:)

Essentially the water just goes straight through.  If you get splashing then you're not getting decent cutting.

Steve
Title: Re: Concertinas, Good Bad and the Ugly ?
Post by: ceemonster on May 18, 2012, 11:54:38 PM
[it is extremely difficult to play jigs and reels on these instruments with any where near the energy and lift you can get out of a melodeon. ]  jimmy keane and the people who jump up and down on the tabletop and break the glassware when he starts to play, would beg to differ with you....i believe there is also a glassware issue when clifton chenier jr. straps on his PA, as there certainly was in the case of his daddy....rumor has it they also hide the glassware when al yankovic enters the building....
Title: Re: Concertinas, Good Bad and the Ugly ?
Post by: Owen Woods on May 19, 2012, 12:20:51 AM

So is setting it on fire if you think about it  (:)

Essentially the water just goes straight through.  If you get splashing then you're not getting decent cutting.

Steve

This is undeniably true! :P
Title: Re: Concertinas, Good Bad and the Ugly ?
Post by: Pete Dunk on May 20, 2013, 09:23:01 PM
On the subject of laser cutting wooden concertina ends I would like to point out that Bill Crossland in Holmfirth has had many sets of replacement anglo ends lazer cut to restore badly damaged vintage instruments. I don't recall burnt edges being an issue but I do take the point that using heat to cut wood must result in some damage. I'll enquire and report back.

I'm agog to hear that a plasma cutter could be used to cut metal ends, the only one I've ever seen in action could cut through 4mm stainless steel as fast as you could move it along by hand against a straight edge but took out a good 2mm wide strip of metal along the way, rather like a table saw does when cutting wood.
Title: Re: Concertinas, Good Bad and the Ugly ?
Post by: malcolmbebb on May 20, 2013, 10:47:03 PM
I have a set of these ends. Haven't done anything with them but I can't remember thinking there was any problem when I got them back.
Title: Re: Concertinas, Good Bad and the Ugly ?
Post by: oggiesnr on May 20, 2013, 11:09:45 PM
On the subject of laser cutting wooden concertina ends I would like to point out that Bill Crossland in Holmfirth has had many sets of replacement anglo ends lazer cut to restore badly damaged vintage instruments. I don't recall burnt edges being an issue but I do take the point that using heat to cut wood must result in some damage. I'll enquire and report back.

I'm agog to hear that a plasma cutter could be used to cut metal ends, the only one I've ever seen in action could cut through 4mm stainless steel as fast as you could move it along by hand against a straight edge but took out a good 2mm wide strip of metal along the way, rather like a table saw does when cutting wood.

As with all cutting it's in the settings of the equipment.  I use a fretsaw and blades vary from 00 to 13 with the latter taking out over five times the amount of the former and cutting very rounded angles (unless you use the 'correct' in and out techniques which are quite time consuming)

With lasers it's a question of the intensity and the speed of the burn.  It's also an issue as to whether they've bothered to clean up the surfaces afterwards.

Steve
SimplePortal 2.3.5 © 2008-2012, SimplePortal