Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3   Go Down

Author Topic: Concertinas, Good Bad and the Ugly ?  (Read 30285 times)

0 Members and 1 Guest are viewing this topic.

oggiesnr

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 995
  • Dino BPII, Alfred Arnold Bandoneon, Loffet G/C
Re: Concertinas, Good Bad and the Ugly ?
« Reply #20 on: May 15, 2012, 02:40:40 PM »

I've recently cut a pair of concertina ends for someone.  I'm an experienced fretworker (it's my job) and they took me ten hours.

Nick "Chalky" Whiteley, a melodeon player from near Chelmsford, is a metal worker by trade, and the other day he showed me some stuff he'd made by laser cutting. I wonder if that's a feasible process for concertina ends (it makes beautifully clean cuts). I've gotta ask him...

It is feasible.  It works better on metal than wood because with wood you get a burnt edge.  The catch is in the design process.  Most laser cutters use CorelDraw to control the cut. However you cannot just scan in a design as a JPEG or GIF, it has to be a vector and that takes time.  It's best suited to mass production, for one-offs the set up time can eat up the time saving on the cutting.

The big advantage of a laser is that you can set the thing running and get on with something else.  The downside is the original cost of the machine.  You have to do a lot of work to justify a sensibly powered laser (to cut 1/8th stainless you need around 400watts).  The 100 watt one I've been looking at is £33,000 plus VAT!

Steve
Logged

baz parkes

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1894
    • All Blacked Up
Re: Concertinas, Good Bad and the Ugly ?
« Reply #21 on: May 15, 2012, 05:37:08 PM »

The 10 watt one I've been looking at is £33,000 plus VAT!
Steve
[/quote

Nearly as much as a Jeffries... >:E >:E >:E

Baz
Logged
On the edge of Cheshire's Golden Triangle, apparently...

Fidjit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 538
    • my space on My Space
Re: Concertinas, Good Bad and the Ugly ?
« Reply #22 on: May 15, 2012, 06:18:23 PM »

Prices. prices. You pay for what you get.

Very glad I bought my (1895) Lachenal in 1972 for £50. Thank you Neil Wayne.

Have had it tuned and re bellowed. Thank you Chris. Plus I've tinkered with it myself a bit too. (I've been on a course)
Think I can add a nought now.

I certainly wouldn't want to part with it.  :|glug
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Concertinas, Good Bad and the Ugly ?
« Reply #23 on: May 17, 2012, 01:08:27 AM »

I've recently cut a pair of concertina ends for someone.  I'm an experienced fretworker (it's my job) and they took me ten hours.

Nick "Chalky" Whiteley, a melodeon player from near Chelmsford, is a metal worker by trade, and the other day he showed me some stuff he'd made by laser cutting. I wonder if that's a feasible process for concertina ends (it makes beautifully clean cuts). I've gotta ask him...

Definitely. Waterjet (for metal) is also possible. There are often small scale producers around and about willing to do small runs if you pay them right. But a laser which will cut through metal will cost you. One that will cut through wood (a la Bergflogt) is a lot cheaper - I think that the one that he has is around £7000. I looked it up. I want one.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

ceemonster

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 108
Re: Concertinas, Good Bad and the Ugly ?
« Reply #24 on: May 17, 2012, 04:57:19 AM »

[So what am I getting at ...... It`s easy to get a well playable Melodeon for far less than £100 - you can even get a Hohner 1 row if you`re lucky and don`t mind it looking like it`s been to beirut and back , Heck a 2 Row even from Germany so long as you don`t mind C/F  ! . but Concertinas seem dispropotionally priced .]

i have been the Big Bad Bomb-thrower on just this very point on the concertina site..... >:E    i should say that i love the concertina, and am lucky enough to have a very nice Anglo, which cost in the price range of a new one by the current makers of concertina-reeded instruments (and was made by one of the contemporary makers, though I bought it used).  but over time i have come to feel that i am not sure you are getting a lot of instrument, or a lot of musical or expressive scope, for that kind of money.  for what you get MUSICALLY, i would feel more comfortable at, say, $2500 dollars for a superbly fast, playable instrument with top-class reeds. accordion reeds, i wouldn't mind. but top-class reeds and super-fast action.   maybe $3000.  i have come to feel that $6000 to $8000 is a lot of money for an instrument that won't play effectively in all keys, and won't do chords effectively in all the keys it does play melodies effectively in.

going even more to extremes, my very nice Anglo concertina, was about half the price of a vintage Jeffries, and less than half the price some Jeffries are rumored to go for on occasion.  and i have come to feel even more strongly about the Jeffries price range ($9,000 to allegedly $14,000 on occasion) not being anywhere I ever would care to go for what you get MUSICALLY.  i actually think there was kind of a Concertina Bubble, not only about prices for vintage concertinas, but in the way people thought about paying this price for instruments of this scope, when times were flusher and cash was more plentiful. 

so yes, i agree with you. one should be able to get an extremely playable starter's instrument for no more than $,1000.00, preferably $500 to $600.  [cheaper than that would be tough due to the sheer number of parts and the mechanism involved].    and given how limited the instrument is in terms of what you can do with it, you should be able to get an extremely fast, extremely responsive, pro-grade instrument for $2500-3000.  [again--lower than that, you probably can NOT get for a really good one, because the sheer number of parts, and the sheer labor-hours required to construct them].

a castagnari lilly is probably a better return on the money.  and a compact single-voice CBA can be had cheaper than a Lilly, and will do vastly, vastly more musically than either a two-row melodeon or a concertina.   the cba has become my main instrument because of all of this.

but i still love concertinas..... :||:

Logged

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Concertinas, Good Bad and the Ugly ?
« Reply #25 on: May 17, 2012, 07:36:43 AM »

Beginner wise, all it would need is the Scarlattis and other £100 chinese 20 button pearloid anglos' actions to be made well enough for the buttons not to wobble and jam the pallets open all the time and Bang, a playable, loud Tina which doesn`t sound half bad for a price which would entice people to give it a go - heck you can buy a borderline playable PA with 8 bass for £35 NEW (they DO work as do the £10 melodeons if you squeeze fast enough)  .

these are £35 new, and are reliable apparently

http://www.youtube.com/watch?v=uMw7YplUbAM
« Last Edit: May 17, 2012, 07:39:05 AM by Adam-T »
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Concertinas, Good Bad and the Ugly ?
« Reply #26 on: May 17, 2012, 08:12:17 AM »

these are £35 new, and are reliable apparently

http://www.youtube.com/watch?v=uMw7YplUbAM

The Chinese have a huge enthusiasm for accordions,  I suspect that if they produced even cheap toy models with sticking keys and leaky bellows then they would loose their home market.   As far as I know there is no mass market for concertinas within China, so they don't have the same incentive to get it right.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: Concertinas, Good Bad and the Ugly ?
« Reply #27 on: May 17, 2012, 08:19:21 AM »

Could you perhaps rephrase that,  Theo  ???
Logged
  _       _    _      _ 

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Concertinas, Good Bad and the Ugly ?
« Reply #28 on: May 17, 2012, 08:25:23 AM »

Could you perhaps rephrase that,  Theo  ???

Re-phrase what?  Have I inadvertently insulted the Chinese? ;D
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

ceemonster

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 108
Re: Concertinas, Good Bad and the Ugly ?
« Reply #29 on: May 17, 2012, 09:34:17 AM »

[Beginner wise, all it would need is the Scarlattis and other £100 chinese 20 button pearloid anglos' actions to be made well enough for the buttons not to wobble and jam the pallets open all the time and Bang, a playable, loud Tina which doesn`t sound half bad for a price which would entice people to give it a go - heck you can buy a borderline playable PA with 8 bass for £35 NEW (they DO work as do the £10 melodeons if you squeeze fast enough)]

you may be right. i may be wrong that it would be hard to make a good beginner instrument for much under $1000. i actually purchased a chinese EC about eight months ago to try the EC experience---it was a 48-button at that, for about $350.  and you know, it was not that far from being very serviceable.  i don't think it was that far from jackies. not up to where it should be--the accidental rows were either bad reeds or badly-fit reeds and hard to get sound from.  the center "white-key" rows responded and sounded like jackies.  really, the chinese are "this close" to making a very playable EC 48 for a cheap price, which is astounding.......
Logged

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Concertinas, Good Bad and the Ugly ?
« Reply #30 on: May 17, 2012, 09:35:45 AM »


a castagnari lilly is probably a better return on the money.  and a compact single-voice CBA can be had cheaper than a Lilly, and will do vastly, vastly more musically than either a two-row melodeon or a concertina.   the cba has become my main instrument because of all of this.

Would it not be more logical to compare your CBA to a Duet concertina than to either two row melodeons or concertinas, which are not aimed at the same use? Even vintage duets are (like for like) cheaper than Anglos, new ones (admittedly hybrid ::)) are available eg Concertina Connection, look nicer, won't give you a hernia, don't need a small truck to move around and will hold their value much longer >:E.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Concertinas, Good Bad and the Ugly ?
« Reply #31 on: May 17, 2012, 02:02:02 PM »

For anyone who thinks old concertinas are overpriced...

http://www.ebay.co.uk/itm/VINTAGE-1964-GIBSON-ES-335-TDC-100-ORIGINAL-ORIGINAL-STOP-TAILPIECE-/190666126276?pt=Guitar&hash=item2c649633c4

...you could have an armload of Jeffries anglos for that....
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Concertinas, Good Bad and the Ugly ?
« Reply #32 on: May 17, 2012, 02:14:31 PM »

not just instruments!

On a recent antiques roadshow they put a value if £2000 on a Victorian corkscrew! I ask you - a corkscrew :o
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: Concertinas, Good Bad and the Ugly ?
« Reply #33 on: May 17, 2012, 03:08:49 PM »

Agree Theo, ridiculous price!   ::)

One suspects it might have gone for even more had
they managed to get that bottle of '61 Lafite off it  :|glug
Logged
  _       _    _      _ 

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Concertinas, Good Bad and the Ugly ?
« Reply #34 on: May 17, 2012, 03:19:07 PM »

For anyone who thinks old concertinas are overpriced...

http://www.ebay.co.uk/itm/VINTAGE-1964-GIBSON-ES-335-TDC-100-ORIGINAL-ORIGINAL-STOP-TAILPIECE-/190666126276?pt=Guitar&hash=item2c649633c4

...you could have an armload of Jeffries anglos for that....

Wooooha -  you could get Jimmy Shand`s actual own Morino, Charles magnante`s Excelsior and maybe even the Actual Penguin of Death Pokerwork for that !

Oh and Chris, you`ll probably get a Turboting on Corkscrew.net for that comment
« Last Edit: May 17, 2012, 03:22:28 PM by Adam-T »
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Concertinas, Good Bad and the Ugly ?
« Reply #35 on: May 17, 2012, 04:53:17 PM »

A couple of years ago I watched Morse concertinas being built.  As a few posters have stated, there are (almost) millions of tiny parts inside, all hand manufacturing, practically nothing automated.  Even the bellows are hard to make.

In the States, a Morse (lower end models) goes for a bit more than a Lilly, I would guess the handwork being the difference.

Now, by the pound, the Lilly is a lot of box for the money.  The Lilly is a nicely made, but factory, instrument.  I would call it very nice, but not artisan work.
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Concertinas, Good Bad and the Ugly ?
« Reply #36 on: May 17, 2012, 05:21:34 PM »

<snip>
 and maybe even the Actual Penguin of Death Pokerwork for that !
</snip>

Doubt it :-)

oggiesnr

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 995
  • Dino BPII, Alfred Arnold Bandoneon, Loffet G/C
Re: Concertinas, Good Bad and the Ugly ?
« Reply #37 on: May 17, 2012, 09:56:38 PM »

I've recently cut a pair of concertina ends for someone.  I'm an experienced fretworker (it's my job) and they took me ten hours.

Nick "Chalky" Whiteley, a melodeon player from near Chelmsford, is a metal worker by trade, and the other day he showed me some stuff he'd made by laser cutting. I wonder if that's a feasible process for concertina ends (it makes beautifully clean cuts). I've gotta ask him...

Definitely. Waterjet (for metal) is also possible. There are often small scale producers around and about willing to do small runs if you pay them right. But a laser which will cut through metal will cost you. One that will cut through wood (a la Bergflogt) is a lot cheaper - I think that the one that he has is around £7000. I looked it up. I want one.

He's cutting through thin wood that won't be seen so the burn line doesn't matter.  More realistically I reckon about £12,500 gets you one which will cut the thicker wood for the ends but you do have the burn issue.

For metal you can also use a plasma cutter.

Again for small runs (and singles) you can find shops that will do them BUT my comment about the design format comes into play.  Producing the cutting file can be very time consuming and it's an acquired skill set.  I can do it but I find it easier to produce a graphic file and "print and stick" which is what I think they did on the Melodeon making courses.

Steve

Added - you can actually use a water cutter on wood, the world's smallest jigsaw is made that way.  It's also how MacDonalds used to cut their breadcakes in half!
« Last Edit: May 17, 2012, 09:58:47 PM by oggiesnr »
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Concertinas, Good Bad and the Ugly ?
« Reply #38 on: May 17, 2012, 10:39:53 PM »

He's cutting through thin wood that won't be seen so the burn line doesn't matter.  More realistically I reckon about £12,500 gets you one which will cut the thicker wood for the ends but you do have the burn issue.

For metal you can also use a plasma cutter.

Again for small runs (and singles) you can find shops that will do them BUT my comment about the design format comes into play.  Producing the cutting file can be very time consuming and it's an acquired skill set.  I can do it but I find it easier to produce a graphic file and "print and stick" which is what I think they did on the Melodeon making courses.

Steve

Added - you can actually use a water cutter on wood, the world's smallest jigsaw is made that way.  It's also how MacDonalds used to cut their breadcakes in half!

Ah true, wooden ends for a concertina are pretty thick. And I dunno, I've used SolidWorks and ProEngineer to make 3D models, I would find it a lot quicker and easier to create a design using them than I would with any other graphics program. That is what is done for the CAD/CAM stuff that goes on in my department, although I've never actually had any of my stuff made (aside from some stuff on a 3D print machine, which is amazing).

Didn't know that you can use a water cutter on wood, I suppose I presumed that liberally soaking a piece of wood would be counter-productive.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: Concertinas, Good Bad and the Ugly ?
« Reply #39 on: May 18, 2012, 08:00:48 AM »

Sounds another case for "21st century box" thinking.   While sanded back wood is lovely it isn't strong and we've all seen badly chipped ones.

I guess nowadays it'd be a wood/carbon fibre laminate, plasma/whatever cut and then the wood side reduced to a couple of mm with a laser controlled power sander/router?  Colin Dipper told me he experimented with several 'ends' materials in the 90's - aluminium springs to mind - but he seems to have gone back to wood and german silver.   
Logged
  _       _    _      _ 
Pages: 1 [2] 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal