Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: with knobs on  (Read 4992 times)

0 Members and 1 Guest are viewing this topic.

Anne Croucher

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 203
Re: with knobs on
« Reply #20 on: December 24, 2017, 10:19:42 PM »

So - supposing some one opened up a really dreadful old box and gazed in disbelief at the state of the valves on the reed strips, which appear to have been stuck on with flour paste - that is the leather onto the reed strips not the reed strips onto the woodwork.
Assuming that there is lots of leather and suede which could be used just lying about the house - what is the best type of replacement stuff?

I was thinking of a high quality suede of coat quality.

Although not every visible reed had a valve, the smallest ones had them - I would not have expected that, but would have thought that the smallest three would be 'naked' - or is it the smallest two? - and also that - with the bellows being quite large, that there should perhaps be small gaps in the wax seal in order to stop overblowing - aka choking for those smallest reeds.
Logged
Barcarole D/G
Hohner Ericas D/G and C/F
Hohner el Rey del Vallenato A/D/G aka 'Elvis'
Hohner Liliput Bb/Eb club layout
Meinel & Herold G C F 3 voice 3 row 16 bass

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: with knobs on
« Reply #21 on: December 24, 2017, 11:06:24 PM »

So - supposing some one opened up a really dreadful old box and gazed in disbelief at the state of the valves on the reed strips, which appear to have been stuck on with flour paste - that is the leather onto the reed strips not the reed strips onto the woodwork.
Assuming that there is lots of leather and suede which could be used just lying about the house - what is the best type of replacement stuff?

I was thinking of a high quality suede of coat quality.....
Your terminology confused me for a bit, but I think that by 'reed strips' you mean reed plates? Reed plates = the aluminium or zinc rectangles which have the steel (or brass) reed tongues riveted on to them. The valves are the leather or vinyl 'strips' which cover the slots in the reed plates in order to prevent air loss through the sides and ends of the non-sounding reed tongue.

Don't be tempted to try to make replacement reed valves. It is not worth it and almost certainly will not work properly. Reed valve leather is very carefully selected and skived to be thin, but with a grain to maintain a semi-rigidity along its length. Buy the proper valves from Charlie Marshall.

Quote
Although not every visible reed had a valve, the smallest ones had them - I would not have expected that, but would have thought that the smallest three would be 'naked' - or is it the smallest two? - and also that - with the bellows being quite large, that there should perhaps be small gaps in the wax seal in order to stop overblowing - aka choking for those smallest reeds.
Usually the two smallest reed plates on each row do not have valves fitted. See here for recent discussion. Also see the description of mounting the smallest reed plates the opposite way round.

Sometimes there are small holes made in the wax, as you have mentioned, to reduce the air pressure and prevent choking. But it's not always necessary; sometimes the reeds will work fine without the holes. But it is an option to keep in reserve if you encounter persistent choking problems.

Good luck with your repair/fettling!
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: with knobs on
« Reply #22 on: December 24, 2017, 11:09:22 PM »

But ready made valves, either leather or plastic.  They are cheap, easy to apply and will work well for many years.  Making your own valves will take a lot of time in trial and error to find out what type of leather is best, possibly paring the leather to get a suitable thickness.  If you are a skilled leather worker you might end up with something passable,  but it’s really not worth the effort.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Anne Croucher

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 203
Re: with knobs on
« Reply #23 on: December 25, 2017, 12:44:58 AM »

Ah - it is just like knitting - shelves of yarn but not the right colour, loads of leather and suede but not the right stuff for the job.
From the description of the right material for the valves none of the reeds have a proper valve.
Perhaps it would have been clearer to call it a reed plate - each voice is one strip of metal not individual blocks
Logged
Barcarole D/G
Hohner Ericas D/G and C/F
Hohner el Rey del Vallenato A/D/G aka 'Elvis'
Hohner Liliput Bb/Eb club layout
Meinel & Herold G C F 3 voice 3 row 16 bass

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: with knobs on
« Reply #24 on: December 25, 2017, 06:27:17 AM »

...
Perhaps it would have been clearer to call it a reed plate - each voice is one strip of metal not individual blocks
Ah - I suspect from your description that your reeds are constructed a single long reed plate with multiple slots and reed tongues. This is an obsolete design, much prone to air leaks. (However, they are still utilised on bandoneons.)

The more usual type of reed plate is a single rectangular design, with two reed tongues, one for the push note (visible on top) and another for the pull note (on the underside). Here's a link to one of Paul Johnson's (deceased of this parish :'( ) Flickr photos which show reeds on a one-rwo four-stop instrument he was making. You can see clearly the individual reed plates. Are yours like that, or does the reed plate run the full length of the wooden reed block?

More about Paul here.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Anne Croucher

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 203
Re: with knobs on
« Reply #25 on: December 25, 2017, 11:10:23 PM »

They are all on one strip - I'd put up a photo but then I'd have to live with it in my archives for ever.

The cost to obtain spares for something which might never play a tune is rather over budget - I have got an empty melodeon with the pallets intact which was originally three voices, and first measurements seem to indicate that it had the same sized plates, so I have chosen some leather, will cut strips and glue them on and see how they sound - if there is any hope I'll resurface the pallets and see what can be done to improve the bellows - I have so much stuff around the house that there has to be something suitable.

Making bellows looks like fun - I make 8 yard kilts so pleating is not a problem - though not having a nice chequered pattern to work to makes it more difficult.   
Logged
Barcarole D/G
Hohner Ericas D/G and C/F
Hohner el Rey del Vallenato A/D/G aka 'Elvis'
Hohner Liliput Bb/Eb club layout
Meinel & Herold G C F 3 voice 3 row 16 bass

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: with knobs on
« Reply #26 on: December 26, 2017, 08:06:21 AM »

They are all on one strip - I'd put up a photo but then I'd have to live with it in my archives for ever.
What's wrong with that? It's hardly a sensitive issue. There's no shame in having an instrument with long reed plates or any other old feature. A photo or two would help the rest of us understand your problems better and to be able to offer more direct and relevant advice, rather than second-guessing a lot of the time.

It's a much hackneyed phrase but true nevertheless: 'a picture is worth a thousand words'.

You could always delete a photo once it had served its purpose. It might still exist on some obscure back-up server somewhere but (a) you probably would never know, and (b) I would repeat the first two sentences of this reply.

But whatever you choose to do, good luck with your restoration project. You are doubtless learning a lot, but remember to be wary of trying to reinvent a wheel which turns out to be polygonal, when there are cheap, perfectly good, round ones already out there.  ;)
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal