Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: repairing flutina top run - 90 deg. corner?  (Read 2544 times)

0 Members and 1 Guest are viewing this topic.

dculgan

  • New Starter
  • Offline Offline
  • Posts: 2
repairing flutina top run - 90 deg. corner?
« on: October 29, 2010, 01:08:44 PM »

I'm doing some repairs to an old French flutina style accordion, and have had to replace some of the diamonds or gussets. In doing this the original strip of leather, I think its called the top run, was disintegrating as I tried to remove it so now my plan is to replace it where needed in about a half a dozen places.

My question is how to make the 90 degree corners. I have a piece of top run leather that was supplied to me already skived. Do I make a little snip at the corner from either side toward the middle and fold over, or just fold and overlap as when wrapping a box with paper. It seems the former would be prone to leaking air but the latter would be sort of bulky. It is hard to see how it was originally done as the leather is so old.

To be honest I'm not sure if the bellows on this old instrument is different than a later melodeon. There are no metal corners and I've seen it referred to as a "bookbinder's bellows". The instrument seems to be like a cross between a melodeon and a concertina with the bellows perhaps more like a concertina.

I am new to all of this, and am trying to improve my repair techniques. Cosmetically, its already a bit compromised, though I haven't done anything that can't be reversed. My goal at this point is really to stop some leaks and improve the compression, but the original covering papers are pretty deteriorated already and don't lift off cleanly for making repairs.

Any thoughts on how to do the corners? I hope my question makes sense. Thanks, D Culgan.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: repairing flutina top run - 90 deg. corner?
« Reply #1 on: October 29, 2010, 02:24:05 PM »

A pic or two would make the problem clearer!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

HallelujahAl

  • Guest
Re: repairing flutina top run - 90 deg. corner?
« Reply #2 on: October 29, 2010, 05:46:18 PM »

With concertina bellows I do not cut the top run in any way - if the leather run is of the correct thickness it'll not be too bulky (I also use a bellows press to compress the binding).
So that's what I'd do.
AL
Logged

dculgan

  • New Starter
  • Offline Offline
  • Posts: 2
Re: repairing flutina top run - 90 deg. corner?
« Reply #3 on: October 29, 2010, 05:48:03 PM »

Here is a picture of the bellows I'm trying to fix the corners on. This was the only pic I have available right now but I'll try and take some of the problem areas and post later. Thanks for the reply Al. The leather has been thinned very much so I thilnk it will work out.

Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: repairing flutina top run - 90 deg. corner?
« Reply #4 on: November 02, 2010, 10:59:37 AM »

Based on those pictures I would not attempt to add any leather at all, just find some dye of a suitable colour, and a coating of natural Resolene or something similar.

If you try to apply an extra layer of even the thinnest leather the result will be a significant thickening of the folds,  if you try to remove the old leather the papers are inevitably going to suffer. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

HallelujahAl

  • Guest
Re: repairing flutina top run - 90 deg. corner?
« Reply #5 on: November 02, 2010, 04:01:23 PM »

having now looked at the pic I agree with you Theo. Am unfamiliar with flutinas - how many folds are there?
AL
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal