Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: larger buttons/larger button holes  (Read 1715 times)

0 Members and 1 Guest are viewing this topic.

tedrick

  • Guest
larger buttons/larger button holes
« on: December 05, 2010, 02:20:52 PM »

Hi Group -
I'm curious what the process is for replacing smaller treble buttons on a celluloid box with larger diameter buttons.

Is it just a matter of having a machinist drill out larger holes on the finger board, or can it be accomplished by enlarging the hole with a sanding drum on a dremel tool? (or would this destroy the celluloid on the fingerboard surface?)

I would think that if there is generous spacing on the trebles, it would be possible to enlarge the button holes and replace the smaller buttons with larger diameter buttons --

Any insights/experiences would be appreciated --
Reed
Logged

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: larger buttons/larger button holes
« Reply #1 on: December 05, 2010, 07:33:48 PM »

Hello Reeds--

Not an answer, but a question:  why?

--Steve
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

tedrick

  • Guest
Re: larger buttons/larger button holes
« Reply #2 on: December 05, 2010, 07:51:32 PM »

Because I know of a very cute little box that I am attracted to -

The little box would be even better if it's button size and button spacing were a bit more like a bouebe or cardin's though --

My preference is for big buttons spaced closely to permit easy sliding between -- my avatar pic of my paolo illustrates --

If current irish box designs are any indicator, it would seem that I am not alone in this preference -- ie Vander Aa, Cairdin, Paddy Clancy...

I know some have fabricated nice new finger boards - ala Lars and his converted pepper pots -- I'd like to stay with the original finger board if possible...
Logged

Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: larger buttons/larger button holes
« Reply #3 on: December 06, 2010, 03:54:27 PM »

Some time ago I did enlarge the holes of a couple of boxes, both old pre-war boxes. One had alu fingerboard cover, and I simply used a step drill to enlarge, with good results. The cover was, fortunately, of rather thich aluminium which stayed stable during the process. The other had celluloid cover, and I dared not use the step drill. I tried using the drill press on a scap cover I had, and the celluloid was torn. I tried different speeds, with similar results. I ended up using a file, and several hours of gently opening up the diameter of the holes.

If ever I was to do something similar, I would use a handpowered reamer - such as those used for cello pegs. A friend used one to enlarge holes on an old fingerboard cover, and with plently of patience, the result was remarkably good, when finished up with some sandpaper and a good polish.

I assume were talking about an old Casali or Serenelli?
Logged

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: larger buttons/larger button holes
« Reply #4 on: December 06, 2010, 04:55:21 PM »

I have a tapered hand reamer which I use for such purposes, although I haven't tried it on an instrument.

Where are you planning to get the buttons?
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal