1) H Corona valves have a little hole in the end that sits over the reed rivet. Do prof tuners just use valves with a hole, punch a small hole or stick unholed valves just south of the rivet?
I never bother with punching holes, just glue on the valve (as you say) south of the rivet. It works fine. Castagnari attach their valves like that and that's good enough for me.
2) Is it feasible to pull off/replace the inner valve without removing the reed plate or is it always best to remove the reed plate/rewax to replace the valve?
Without removing the reed plate, it's easy enough to pull off the old valve using tweezers through the air hole. The trouble then is cleaning off old glue residue and gluing on a new valve. I would never attempt to do this with the reed plate in situ; I always remove the reed plate and re-wax it on after attaching the new valve.
3) I have a piano tuning gadget that automatically tunes to equal temperament. I assume that the Strobosoft tuner doesn't; so what tuner device, s/w do tuners use? I've looked at Dirk's s/w but its a bit pricey.
I use a Peterson tuner and it can be set to ET or to a variety of historical temperaments. I'm sure others will reply with their own experiences.