Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner valves and tuning device or s/w  (Read 1945 times)

0 Members and 1 Guest are viewing this topic.

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Hohner valves and tuning device or s/w
« on: November 02, 2013, 06:12:49 PM »


1) H Corona valves have a little hole in the end that sits over the reed rivet. Do prof tuners just use valves with a hole, punch a small hole or stick unholed valves just south of the rivet?

2) Is it feasible to pull off/replace the inner valve without removing the reed plate or is it always best to remove the reed plate/rewax to replace the valve?

3) I have a piano tuning gadget that automatically tunes to equal temperament. I assume that the Strobosoft tuner doesn't; so what tuner device, s/w do tuners use?  I've looked at Dirk's s/w but its a bit pricey.
 
Thanks.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Hohner valves and tuning device or s/w
« Reply #1 on: November 02, 2013, 06:20:57 PM »


1) H Corona valves have a little hole in the end that sits over the reed rivet. Do prof tuners just use valves with a hole, punch a small hole or stick unholed valves just south of the rivet?
I never bother with punching holes, just glue on the valve (as you say) south of the rivet. It works fine. Castagnari attach their valves like that and that's good enough for me.

Quote
2) Is it feasible to pull off/replace the inner valve without removing the reed plate or is it always best to remove the reed plate/rewax to replace the valve?
Without removing the reed plate, it's easy enough to pull off the old valve using tweezers through the air hole. The trouble then is cleaning off old glue residue and gluing on a new valve. I would never attempt to do this with the reed plate in situ; I always remove the reed plate and re-wax it on after attaching the new valve.

Quote
3) I have a piano tuning gadget that automatically tunes to equal temperament. I assume that the Strobosoft tuner doesn't; so what tuner device, s/w do tuners use?  I've looked at Dirk's s/w but its a bit pricey.
I use a Peterson tuner and it can be set to ET or to a variety of historical temperaments. I'm sure others will reply with their own experiences.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Hohner valves and tuning device or s/w
« Reply #2 on: November 02, 2013, 06:37:41 PM »

Thanks Steve

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Hohner valves and tuning device or s/w
« Reply #3 on: November 02, 2013, 06:38:10 PM »


1) H Corona valves have a little hole in the end that sits over the reed rivet. Do prof tuners just use valves with a hole, punch a small hole or stick unholed valves just south of the rivet?
I use unholed just south of the rivet with no problems

Quote
2) Is it feasible to pull off/replace the inner valve without removing the reed plate or is it always best to remove the reed plate/rewax to replace the valve?
No!

Quote
3) I have a piano tuning gadget that automatically tunes to equal temperament. I assume that the Strobosoft tuner doesn't; so what tuner device, s/w do tuners use?  I've looked at Dirk's s/w but its a bit pricey.

I use Strobosoft on an iPhone when tuning and also have Dirks which is useful for checking the reeds when installed in the box after tuning with Strobosoft.

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Hohner valves and tuning device or s/w
« Reply #4 on: November 02, 2013, 06:47:15 PM »

Quote
2) Is it feasible to pull off/replace the inner valve without removing the reed plate or is it always best to remove the reed plate/rewax to replace the valve?
No!


Is that "No it's not feasible", or "No it's not always best to remove the reedplate" (or just plain "NO"!)?   ;D >:E
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Hohner valves and tuning device or s/w
« Reply #5 on: November 02, 2013, 08:09:18 PM »

I take it to mean... No! don't try and replace the valves with the reed plate in situ..  ;)

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner valves and tuning device or s/w
« Reply #6 on: November 02, 2013, 08:49:11 PM »

I do sometimes replace indeed valves with tweezers if the wax is in good condition. It is easier with leather valves than plastic and recall only practical with the larger reeds. Of course you do have to trim the valve to the correct length.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal