The reed blocks would be swapped with someone in Newfoundland and would have to be mailed...that brings up another question - how to safely package reed blocks for transport in the post?
1. Wrap a layer of brown paper around each reed block and tape lightly into place. That will help protect the reed tongues and valves from the rest of the packaging.
2. Put a couple of layers of bubble-wrap around each reed block and tape into place.
3. Lay the wrapped reed blocks side-by-side and sandwiched between two sheets of strong thick card. Tape another layer of bubble-wrap around the sandwich.
4. Put the whole lot into a strong cardboard carton. Fill any remaining space on all sides/top and bottom with more bubble wrap scraps or polystyrene chips. Include a sheet of paper inside the carton with your address and the recipient's address, just in case the outer packaging gets damaged and the external addressing gets lost or illegible.
5. Tape all sides and seams of the carton securely with strong parcel tape.
6. On the exterior add the recipient's address and sender's address clearly labeled inside a transparent plastic pocket, taped securely on all sides. Mark the package clearly as 'Fragile'.
That should do the trick....