Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Flat mount reed orientation  (Read 4423 times)

0 Members and 1 Guest are viewing this topic.

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: Flat mount reed orientation
« Reply #20 on: February 19, 2016, 07:29:29 PM »

both reed valves operate from the same air surge  - only way to create separate, individual, airtight chambers would require a box from hell with push buttons and draw buttons, you could drill another set of holes, with extra levers, pallets and buttons?!!   
« Last Edit: February 19, 2016, 07:46:14 PM by gettabettabox »
Logged

bellowpin

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 119
Re: Flat mount reed orientation
« Reply #21 on: February 19, 2016, 09:31:51 PM »

- only way to create separate, individual, airtight chambers would require a box from hell with push buttons and draw buttons, you could drill another set of holes, with extra levers, pallets and buttons?!!
          It seems impractical to make an airtight chamber for each of the two reeds on the same plate. my thought was maybe an incomplete seperating wall might yet give some improvement in tone or response.  the airflow may be focused toward the individual reed,rather fill out the full volume of chamber.   sometimes by trying something odd we can learn  the unexpected, even though my understanding of the principles is limited.    brian..
Logged
whole life in the shropshire hills. on the slow track and enjoying it.

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: Flat mount reed orientation
« Reply #22 on: February 19, 2016, 10:21:41 PM »

yep, i wasn't mocking your idea brian. i just guess that as box players, most of us know how quickly pressurised air will find any gap.
i suspect that both halves of a partially divided chamber will fill in the same way as one that is un-divided.
the results of increased ''intra-chamber'' turbulence might have some impact that could be an 'eureka' moment?!
we await results from your testing station.  (:)   

 
 
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Flat mount reed orientation
« Reply #23 on: February 23, 2016, 10:46:23 PM »

Most reeds work best with the tip of the reed at the far end from the opening, whether mounted flat or on a conventional block.  The only exception is some high pitch reeds which respond better and produce more volume when reversed. On a typical treble reed bank you might find the highest two reed plates reversed. On an upright block they are easier to tune with the reed tips upwards, but flat mounted I makes little difference.

It's easy to see why with conventional reed blocks "tip up" is better than "tip down", just consider the airflow in through the pallet hole and out past the free end of the reed where most of it goes.

It's much more difficult to see why this should be best for flat-mounted reeds, you'd think the pallet hole would be better placed under the tip of the reed not the root.

Has anyone tried flat-mounted reeds both ways round in the same box? In the case with the pallet hole under the tip, you'd also think that a wedge to block out the chamber volume towards the root might be a good thing, this can't be done the other way round because maximum depth is needed under the tip. It's also possible that a small pallet hole won't work so well under the tip because of uneven airflow, so a bigger pallet hole is needed for "hole under tip".

In other words, just turning the reeds round and concluding that "pallet hole under tip" doesn't work might be because the reed chamber and pallet hole design aren't optimum for this case, rather than "pallet hole under root" being inherently better. Or not... ;-)

Ian

I made a simple block of wood with a rectangular cut-out to accommodate and test flat-mounted reeds.
Using my new, electric fan driven, tuning table (sincere thanks to Scott Bellinger for his help with this) I tried various positions for the block, over air holes of various sizes.

My conclusion is that the reed invariably sounds best when the air enters at the rivet end.
The amplitude is greater, and the reed response is faster, i.e. reaches maximum amplitude in less time. (Ability to instantly change from suck to blow on the new tuning table made this very apparent.)

Note: if the air-hole is at the reed-tip end, with high air flow, the reed valve tends to get sucked down the holehttp://forum.melodeon.net/Smileys/default/grin.gif

Fascinating Chris, glad to see somebody actually tried this instead of just speculating :-)

With the pallet hole under the tip, did you also try reducing the chamber volume towards the reed root with a wedge? Can't do this with the hole under the root because the chamber needs enough depth for the reed to swing and the valve to open.

Sucking the valve down the hole does seem like a definite disadvantage though...
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal