Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Prepping  (Read 4019 times)

0 Members and 1 Guest are viewing this topic.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Prepping
« Reply #20 on: November 07, 2018, 10:39:43 PM »

... There is usually not a lot of clearance inside the reed chamber and it is all too easy to have a valve fouling the sides or end of the reed chamber. (remedies: reposition the reed plate a fraction or the valve; trim the valve length if it is too long; or final resort, carve some of the wood away from the reed chamber end.

It will not be necessary to remove any wood from the chamber in order to fit a new valve.
This measure is only called for when fitting a reed that is longer or wider than the original.
I am a bit surprised at your advice.
Normally no - I agree with you, mostly it is not necessary. But I have come across rare instances where reeds have been fitted which are just slightly too long for the chamber* and the valves have fouled the ends of the chamber, even when trimmed to the shortest possible length and yet still covering the reed plate slot. So a slight modification to the chamber is needed.

* For example, this can happen when a conversion from 3rd to 4th button start has been carried out, by shifting the reed plates up a chamber. The new receiving chamber may be too short to accommodate the shifted and perhaps slightly longer reed.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: Prepping
« Reply #21 on: November 08, 2018, 01:24:23 AM »

Fair enough, but it's not what the OP is doing.
Pat is a novice (I hope he doesn't mind me saying that), and I think it's best to keep the advice to the point.
If he fits his new valves correctly, there will be no need to make any alterations to the reed chamber.
Logged

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: Prepping
« Reply #22 on: November 08, 2018, 01:50:02 AM »

Of all the different waxing methods, it looks like the old tiny paint brush appears to be the easiest but I won't know until I start.

I thought the same thing. The problem I had with this method was the brush sticking to the plates.
Probably due to the wax not being sufficiently heated. A second problem is that you can easily pile on a lot
more wax than is necessary.
I have started using the spatula method. I have also tried the spoon, but right now the spatula is my preferred option.
Logged

Pat McInnis

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 390
Re: Prepping
« Reply #23 on: November 08, 2018, 02:50:39 AM »

Of all the different waxing methods, it looks like the old tiny paint brush appears to be the easiest but I won't know until I start.

I thought the same thing. The problem I had with this method was the brush sticking to the plates.
Probably due to the wax not being sufficiently heated. A second problem is that you can easily pile on a lot
more wax than is necessary.
I have started using the spatula method. I have also tried the spoon, but right now the spatula is my preferred option.
I'd be interested to see if you have any links to this method. I'm a bit overwhelmed with options at this point. BTW novice is exactly what I am and I have no problem with that.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Prepping
« Reply #24 on: November 08, 2018, 08:39:04 AM »

Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: Prepping
« Reply #25 on: November 08, 2018, 09:25:07 AM »

I'm a bit overwhelmed with options at this point.

Entirely understandable. By all means, you should stick with your plan to try the brush method.
It does work. Make sure the wax is sufficiently heated, and use a small, good quality brush.
All of the various methods require a lot of practise.
Logged

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Prepping
« Reply #26 on: November 08, 2018, 10:07:44 AM »

My first attempt was done with the brush, and I failed miserably, the wax didn't flow, and the brush stuck to the reed plates. I now know that this was because I hadn't heated the wax up sufficiently, and that using a cheap waxpot which is designed for depilation, and not reed waxing temperatures, I was never going to be able to use this method.
I now use the spoon shown in the video link earlier, and, using the same waxpot, I am able to wax in reeds quite adequately. It took a bit of practice, but I'm happier with my results now.

Sir John
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Prepping
« Reply #27 on: November 08, 2018, 10:36:49 AM »

using a cheap waxpot which is designed for depilation, and not reed waxing temperatures, I was never going to be able to use this method.

Not necessarily; I used to use a little Chinese electric hotplate and a briki (Greek coffee pot), and it wasn't easy to maintain a constant temperature or to avoid overheating the wax. On the offchance I bought a depilatory waxpot from Lidl, on the grounds it was worth a try at the price, and it has worked beautifully. Maybe it depends on the brand of waxpot and the recipe of your wax?

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal