Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Reedplate gasket and screws  (Read 3144 times)

0 Members and 1 Guest are viewing this topic.

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Reedplate gasket and screws
« Reply #20 on: March 23, 2020, 03:28:49 PM »

By passive I mean wax isn't under stress when the instrument isn't being played- There are dynamic loads on the reed plates when the instrument is being played - on push notes the reedplates are pushed onto the block by air pressure. On pullnotes the vacuum in the bellows tends to pull reeds away from the reed bocks.

Screws by comparison actively press the reedplates onto the reedblocks.
The screws (I would think) don’t need to be that tight ,so you could press the reed plate tight with your fingers to the reed block gasket and simply screw the screw in until its head is snug or touching the plate. There would be no more pressure added or applied by the screw, it just holds it there. and I’m saying so does the wax.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Reedplate gasket and screws
« Reply #21 on: March 23, 2020, 03:58:33 PM »

Would it be any use to test just with one reed? 

If so:
I have just enough Olovisc and exactly 2 of the right screws. (Sorry, i don't have more than these tidbits)
 If interested in doing a test, you can PM me - I'm in Ottawa.
The price?  Letting us know the results! (oh, and eventually returning the precious, precious screws.)

Thanks for the offer, but I'm going to be ordering some Olovisc to have on hand anyways and will test it out then.  I'll let you all know!
Logged
C#/D player

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Reedplate gasket and screws
« Reply #22 on: March 24, 2020, 12:20:18 AM »

By passive I mean wax isn't under stress when the instrument isn't being played- There are dynamic loads on the reed plates when the instrument is being played - on push notes the reedplates are pushed onto the block by air pressure. On pullnotes the vacuum in the bellows tends to pull reeds away from the reed bocks.

Screws by comparison actively press the reedplates onto the reedblocks.
The screws (I would think) don’t need to be that tight ,so you could press the reed plate tight with your fingers to the reed block gasket and simply screw the screw in until its head is snug or touching the plate. There would be no more pressure added or applied by the screw, it just holds it there. and I’m saying so does the wax.

When fixing reed plates on to olovisc gaskets using screws, you don't need to tighten the screws excessively, just enough to bed the reed plates in to the olovisc and stop any air leaks. Overtightening will result in distortion of the reed plates and which can lead to the reed tongue fouling the sides of the slot - usually the first sign that you've tightened too much. Just release the screw a bit and the reed should sound properly.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal