Hi all, not sure why I am posting this: I’m a bit proud I guess, but also some of you might be encouraged to try something similar.
I was preparing a Hohner Club III for sale by giving it a ‘celeste’ tuning (more on that in another post). But in the Netherlands everybody is playing C/F with a flipped reed plate on button 5 of the inner row, so even a tuned Club might not sell very well.
So in order to make the instrument more desirable I decided to get rid of the ‘gleichton’ (C/C) and replace it with D/C.
I found some old D piano accordion reed plates and put some solder on the reeds to tune them down, having found that it is very easy to tune reeds way down by as much as a fourth.
It turned out to be somewhat more difficult than I had imagined: first I put all three reeds in the blocks the wrong way, and then I had to take one reed plate out for the second time to add a bit more solder. Also the aluminum register sliders freak me out when I have to put the reed blocks back in the instrument, but somehow it has succeeded every time I had to do this.
Then it was just a matter of tuning in the instrument and presto! I could play all my tunes using the familiar fingering. The operation had one downside though: I’m now doubting if I want to sell the instrument…
---
The week before I had found to my dismay that I couldn’t play a lovely Irish tune (Pull the knife and stick it again) on my D/G as the instrument lacked a B note in the low octave (in the high octave the notes got really high and were not very pleasing to the ear).
I found a seemingly redundant D note on the second button of the inner row, and encouraged by the experience describe above, I thought why not tune it down to B?
I encountered no problems here and the job was done in less than half an hour, including the tuning. Now I’m happily enjoying the sound of the B note over a D chord!
Willem