Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: De-clubbed a Hohner and added a note to my D/G in one weekend!  (Read 965 times)

0 Members and 1 Guest are viewing this topic.

Willem Feltkamp

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 129
  • Tinkering and playing diatonics and CBA

Hi all, not sure why I am posting this: I’m a bit proud I guess, but also some of you might be encouraged to try something similar.

I was preparing a Hohner Club III for sale by giving it a ‘celeste’ tuning (more on that in another post). But in the Netherlands everybody is playing C/F with a flipped reed plate on button 5 of the inner row, so even a tuned Club might not sell very well.

So in order to make the instrument more desirable I decided to get rid of the ‘gleichton’ (C/C) and replace it with D/C.
I found some old D piano accordion reed plates and put some solder on the reeds to tune them down, having found that it is very easy to tune reeds way down by as much as a fourth.

It turned out to be somewhat more difficult than I had imagined: first I put all three reeds in the blocks the wrong way, and then I had to take one reed plate out for the second time to add a bit more solder. Also the aluminum register sliders freak me out when I have to put the reed blocks back in the instrument, but somehow it has succeeded every time I had to do this.
Then it was just a matter of tuning in the instrument and presto! I could play all my tunes using the familiar fingering. The operation had one downside though: I’m now doubting if I want to sell the instrument…
---
The week before I had found to my dismay that I couldn’t play a lovely Irish tune (Pull the knife and stick it again) on my D/G as the instrument lacked a B note in the low octave (in the high octave the notes got really high and were not very pleasing to the ear).
I found a seemingly redundant D note on the second button of the inner row, and encouraged by the experience describe above, I thought why not tune it down to B?
I encountered no problems here and the job was done in less than half an hour, including the tuning. Now I’m happily enjoying the sound of the B note over a D chord!

Willem
Logged

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: De-clubbed a Hohner and added a note to my D/G in one weekend!
« Reply #1 on: March 18, 2024, 05:08:49 PM »

From someone planning on converting a club II box to Dutch reversal myself (currently avoiding push C’s on F row), I am glad I started on a one row box, since I then learned about this tuning before moving to 2+ rows and getting used to the standard layout. Being Dutch reversed on the Club also allows you to have C# on both push and pull on the accidentals row (to match the A chord particularly). To achieve this, I replaced the Eb/C# and D/Eb reedplates with unisonoric C# and Eb reedplates from a similar vintage PA (if you’re already used to where the notes are on the acc row you could just tune the surplus push D note down to C#, thinking about it…)
« Last Edit: March 18, 2024, 05:21:00 PM by Arnold »
Logged
Dancing about architecture since 1997

Willem Feltkamp

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 129
  • Tinkering and playing diatonics and CBA
Re: De-clubbed a Hohner and added a note to my D/G in one weekend!
« Reply #2 on: March 24, 2024, 01:16:25 PM »

Arnold, thanks for the suggestion. Taking a closer look at the accidentals is something on my to do list!
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal