I did have the idea to take some brass string, cut it to an appropriate length then solder that to the reed tongue near the rivet. I hoped to raise the pitch this way. I also planned on wicking most of the solder away so that the strengthening piece was largely the brass wire. Only problem was, I needed about six hands to hold it down and solder the length.I did try this on a scrap reed just for practice. I never did get the brass wire to stick to the tongue in order to try it out. Oh well.
Good try; a few years ago I was visiting a major church organ maker in Holland, and they had made a reed that they had placed a small threaded bar over the reed with a little pointer that came down and touched the reed, this was adjustable by turning a knob with the idea that the pitch could be changed during playing, needless to say they had retrieved it out of the junk box in the attic to show me.
Oh well!!!