Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Repitching to D/G.  (Read 5673 times)

0 Members and 1 Guest are viewing this topic.

Peter Stormy Hyde

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 143
    • Hyde Accordions
Re: Repitching to D/G.
« Reply #20 on: July 31, 2011, 10:41:53 AM »

I did have the idea to take some brass string, cut it to an appropriate length then solder that to the reed tongue near the rivet. I hoped to raise the pitch this way. I also planned on wicking most of the solder away so that the strengthening piece was largely the brass wire. Only problem was, I needed about six hands to hold it down and solder the length.I did try this on a scrap reed just for practice. I never did get the brass wire to stick to the tongue in order to try it out.  Oh well.

Good try; a few years ago I was visiting a major church organ maker in Holland, and they had made a reed that they had placed a small threaded bar over the reed with a little pointer that came down and touched the reed, this was adjustable by turning a knob with the idea that the pitch could be changed during playing, needless to say they had retrieved it out of the junk box in the attic to show me. 
Oh well!!!
Logged
"Locally Made; Globally Played". Truly custom made melodeons. your total needs are met in the construction of your personalized instrument. People with physical disabilities are catered for as far as possible.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Repitching to D/G.
« Reply #21 on: July 31, 2011, 10:47:41 AM »

I couldn't agree more but I had to make my own mistakes.

Quite right too! :D
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Peter Stormy Hyde

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 143
    • Hyde Accordions
Re: Repitching to D/G.
« Reply #22 on: August 04, 2011, 07:03:03 AM »

Hi Pete,

So you retuned some PA reeds with solder? Would you mind relaying what kind of reeds you started with and what they sounded like after?

Ed

Almost but not quite Ed! I retuned a C/C# Hohner down to B/C. I found it hard to get a nice neat blob of solder in the centre of the smaller reed tips in many cases so the results were mixed and it was very fiddly! My experiments beefing up the belly of some of the chord reeds to raise the pitch worked, but the sound of the reeds was quite muddy in tone so less than successful. Even weighting the tips of the chord reeds wasn't that neat although they sounded fine. See pic. I'm fine doing soldering on circuit boards but steel reeds are less accommodating.  :o



I might be telling my to granny how to suck eggs but did you clean the tip of the reed first with emery cloth (I use a small grinder, so it is fast) and then use a good flux? as I find if I do it flows very well, and I'm getting quite a dab hand at it.
Peter
Logged
"Locally Made; Globally Played". Truly custom made melodeons. your total needs are met in the construction of your personalized instrument. People with physical disabilities are catered for as far as possible.
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal