Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: clip on mics  (Read 10505 times)

0 Members and 1 Guest are viewing this topic.

TooManyButtons

  • Member
  • *
  • Offline Offline
  • Posts: 17
Re: clip on mics
« Reply #20 on: August 18, 2008, 01:40:27 PM »

Hi there: I use a hybrid 416/516 system: 516 on right hand (velcro base, but will be making use of the stickys soon), 416 on the left, mounted from underneath.

The 516 cable entry is pretty reasonable and well supported, but the 416 cable entry is not strain relieved, so inevitably I got a knee in the wrong place and pulled it half off. Soldering Iron (to fix) + Heatshrink to provide a strain relief at the point the cable enters the mic gooseneck seems to have done the job - if the heatshrink is large enough to clip into the cable guides on the 416 base mount, so much the better.

The reason I don't use 516's both ends is: I find the softer gooseneck coupled with the heavier capsule "walks" the mic away from the instrument as I play.....!

I've found a slight spike at about 5kHz with them when using the two-mic pattery pack though, but they are the most feedback-immune mics I know of. I don't have the mic inside the bass end of the box because I don't like the sound it gives (I've experimented with Tandy, Microvox, assorted component electrets etc etc).

(p.s. couple them with an Behringer Ultragain front end MIC2200, and suddenly 5kHz spike vanishes + there's a distinct increase in "crispness"... just found that out by accident...)

2p duely deposited,



Logged
-- Don't fear the penguins! --

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: clip on mics
« Reply #21 on: August 19, 2008, 12:08:38 AM »

Sincere thanks to all who have come to my aid with advice. Howard - the 416 service document was especially useful. It has helped my friend replace the cables on my mics, so I am now up and running again.  :)

 
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Sandy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1007
  • 'Musical Landlady'
Re: clip on mics
« Reply #22 on: August 19, 2008, 05:00:29 PM »

This forum is amazing and everyone so helpful. I thought i'd put clip on mics on my christmas list until last weekend.
I saw this chap called John Kirkpatrick play a few times at Bideford Folk Festival and he just stood near two mics on stands, it was wonderful.
(I'm sure he'll go far !!!!!!) ;D
cheers
Sandy
p.s. someone called Saul Rose used this option too....he wasn't bad either!!!!! ;)

Falseknight

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 449
    • False Knight
Re: clip on mics
« Reply #23 on: August 19, 2008, 11:53:53 PM »

Cool, but you have to see the size of the ulcers of their sound techs! ;D

Putting the engineering hat on, when I am working with the ceilidh bands I play with, I love internal mikes; then close mikes; then distant mikes - but ONLY if I (or someone else who knows what they are doing) is driving the desk. (I play frets mainly, but also engineer)

If I'm recording, distant mikes every time!

Before I stopped,I only played melodeon in acoustic situations -which is why I used an Erica and a Corona.  I've not  yet worked out the right approach for now.
Logged

Howard Jones

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1203
Re: clip on mics
« Reply #24 on: August 19, 2008, 11:54:51 PM »

I found the AKG C 416's to be a bit fragile, I've broken two in normal stage use, luckily my insurance company was willing to cough up.  The C 516 seems more robust, and as the cable plugs into the mic with a mini-XLR it could in theory be replaced if it were damaged, if you could find a way of getting spares out of AKG.

Playing into mics on stands is fine if you're on a large stage with plenty of room, but the stages I play on always seem to be a size smaller than the band, so using clip-on mics saves space
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal