Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Raising the volume of the inner row  (Read 5681 times)

0 Members and 1 Guest are viewing this topic.

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Raising the volume of the inner row
« Reply #20 on: May 16, 2012, 01:59:17 PM »

Hi all,

One construction feature seems a very effective solution to this problem in a 2-row, 2-voice box I have.  This box has two reedblocks on the melody side.  The melody-side reedblock whose pallets open up closest to the keyboard (usually the muted reedblock in most 2-voice boxes, and usually though not always corresponding to the inner row of melody buttons) is glued directly to the soundboard with no gasket.  The other reedblock, whose pallets open under the upper edge of the grille, further away from the keyboard, is removable to facilitate maintenance of its reeds (and allowing easier access to the reeds of the glued-in reedblock, when the other is removed).  The sound balance between the melody rows is exceptional, especially compared to other examples of very similar boxes that don't have one fixed reedblock.  The improved coupling of the fixed reedblock seems to boost the volume of those reeds and "presence" of higher frequency harmonics as perceived by the player, enough to counteract the usual effect of the lower pallet position. 

PG
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Raising the volume of the inner row
« Reply #21 on: May 16, 2012, 02:53:11 PM »

That's interesting PG. Certainly it squares with diatonix's findings on the effect of gluing down reed blocks.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Mike Hirst

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1433
  • Black Dot B/C, Bastardo C#/D, Corona II GCF
Re: Raising the volume of the inner row
« Reply #22 on: May 16, 2012, 03:15:11 PM »

Does this have any bearing on the fixed reed blocks in the Hohner 114?
Logged
Semper idem, sed non eodem modo

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Raising the volume of the inner row
« Reply #23 on: May 16, 2012, 04:07:51 PM »

Hi ukebert and Mike,

Yes, I mentioned this example (a Scandalli C/C#) in a previous thread where diatonix discussed that.

The general principle of bigger, brighter sound from glued-in reedblocks seems well-known to accordion makers.  Yes, I'm sure it contributes to the sound of the Hohner 1-row boxes with stops (and to many other 1-row boxes, old and new, with glued-in blocks).  Also you often see glued-down blocks on the bass side (and/or laid-flat blocks for the highest ranks of reeds) of accordions, even when the melody side blocks are removable.

But in the context of this thread, this particular Scandalli is interesting in that the two different types of coupling of its reedblocks to the soundboard have the effect of reversing the common problem of imbalance in timbre between the notes from the two rows of melody buttons.

I have seen (and previously mentioned here on melnet) the reverse issue too -- a 2-row german concertina where the fact that one reedblock on each side was glued down, and the other was removable, resulted in an exaggerated inbalance in timbre between the rows. 

In the photo below of 3 very similarly-constructed boxes with similar typical action design (inside row buttons operate lower row of pallets), only the red Scandalli C/C# with aluminum grille (center) has the fixed reedblock for the inner row buttons, and only this accordion has the extra brightness from the reeds for that row.  The other two accordions (brown Villani G/C with aluminum grille, made nearly identically to the Scandalli C/C# and red Scandalli C/C# with red celluloid grille) have both melody reedblocks removable, and the typical muted partials from the inside-row reeds, compared to the typical brighter timbre from the reeds for the outside-row buttons.

PG



« Last Edit: May 16, 2012, 04:29:32 PM by pgroff »
Logged
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal