Hi ukebert and Mike,
Yes, I mentioned this example (a Scandalli C/C#) in a previous thread where diatonix discussed that.
The general principle of bigger, brighter sound from glued-in reedblocks seems well-known to accordion makers. Yes, I'm sure it contributes to the sound of the Hohner 1-row boxes with stops (and to many other 1-row boxes, old and new, with glued-in blocks). Also you often see glued-down blocks on the bass side (and/or laid-flat blocks for the highest ranks of reeds) of accordions, even when the melody side blocks are removable.
But in the context of this thread, this particular Scandalli is interesting in that the two different types of coupling of its reedblocks to the soundboard have the effect of reversing the common problem of imbalance in timbre between the notes from the two rows of melody buttons.
I have seen (and previously mentioned here on melnet) the reverse issue too -- a 2-row german concertina where the fact that one reedblock on each side was glued down, and the other was removable, resulted in an exaggerated inbalance in timbre between the rows.
In the photo below of 3 very similarly-constructed boxes with similar typical action design (inside row buttons operate lower row of pallets), only the red Scandalli C/C# with aluminum grille (center) has the fixed reedblock for the inner row buttons, and only this accordion has the extra brightness from the reeds for that row. The other two accordions (brown Villani G/C with aluminum grille, made nearly identically to the Scandalli C/C# and red Scandalli C/C# with red celluloid grille) have both melody reedblocks removable, and the typical muted partials from the inside-row reeds, compared to the typical brighter timbre from the reeds for the outside-row buttons.
PG