Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Mics & Pick Ups  (Read 1492 times)

0 Members and 1 Guest are viewing this topic.

anotherboxplayer

  • Good talker
  • **
  • Offline Offline
  • Posts: 78
Mics & Pick Ups
« on: July 27, 2012, 08:40:34 AM »

I'd like to 'upgrade' my microvox pickups at both ends of my melodeons.

I want a non permanent fixing (ie no screw holes in the melodeon case) and ideally I'd like the bass and melody pick ups to go to a power supply box on my belt where I can control the balance of bass and melody.  Ideally phantom powered.  (I have both a microvox battery power supply unit  http://www.microvox.demon.co.uk/psu.htm and a phantom power xlr orchid contact power unit http://www.orchid-electronics.co.uk/ )

What do you recommend?

Unlike Ian, I can't stand still and use a mic on a stand for the melody end although I understand the science behind his reasoning!

All suggestions and input will be welcome!  Thanks in advance.

Logged

melodyman

  • Good talker
  • **
  • Offline Offline
  • Posts: 81
  • Handry 12,Evo
Re: Mics & Pick Ups
« Reply #1 on: July 27, 2012, 09:07:22 AM »

Jez

I asked the same question about 4 years ago.
I decided in the end to use 2 AKG C516 ML mikes with a a battery pack from the same manufacturer.
Never regretted it myself and it will do all you ask.
A bit pricey but a definite improvement on the microvox (IMHO)

I am intending in the near future to upgrade to a wireless radio system  using the same mics.

Davied
Logged
,Handry 12,Evo.

anotherboxplayer

  • Good talker
  • **
  • Offline Offline
  • Posts: 78
Re: Mics & Pick Ups
« Reply #2 on: July 27, 2012, 09:27:58 AM »

thanks David

How do the 516's attach to your boxes - is it a stick back velcro arrangement like the microvox tends to be?

jerry
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Mics & Pick Ups
« Reply #3 on: July 27, 2012, 12:53:30 PM »

Jez

I asked the same question about 4 years ago.
I decided in the end to use 2 AKG C516 ML mikes with a a battery pack from the same manufacturer.
Never regretted it myself and it will do all you ask.
A bit pricey but a definite improvement on the microvox (IMHO)

I am intending in the near future to upgrade to a wireless radio system  using the same mics.

Davied
Why on earth AKG don't do a similar box to the B29L (phantom power + volume for 2 mics) but with a stereo output beats me, this would be a much better solution for PA use...

(a stereo wireless system would be even better, but a lot more expensive)
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

melodyman

  • Good talker
  • **
  • Offline Offline
  • Posts: 81
  • Handry 12,Evo
Re: Mics & Pick Ups
« Reply #4 on: July 27, 2012, 01:24:55 PM »



"How do the 516's attach to your boxes - is it a stick back velcro arrangement like the microvox tends to be?"


Jez
They come with a mounting plate that you can attach to your box with a self hardening adhesive putty.
I didn't trust this and used screws.
I have since been told that the putty works well and can be removed with a sharp chisel when the time comes
to do so.
I also agree with what Ian has said about a stereo output from the B29L not being available and was one of the reasons I will go wireless.

Davied
Logged
,Handry 12,Evo.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Mics & Pick Ups
« Reply #5 on: July 27, 2012, 01:38:05 PM »



"How do the 516's attach to your boxes - is it a stick back velcro arrangement like the microvox tends to be?"

Jez
They come with a mounting plate that you can attach to your box with a self hardening adhesive putty.
I didn't trust this and used screws.
I have since been told that the putty works well and can be removed with a sharp chisel when the time comes
to do so.
I use these mics. I used a patch of self-adhesive velcro (the 'hook' side) on the underside of the mounting plate, the velcro trimmed to the same shape as the mounting plate. Then, on the melodeon, a similar shaped piece of self-adhesive velcro (the furry side) stuck to the top surface of the casing, near the strap bracket on the RH side and in the equivalent place on the LH side. Before pressing the adhesive patches into place I previously cleaned and degreased the attaching area with a cloth dampened with white spirit.

The velcro patches hold the clip-on mics quite firmly, but allow the mounting plate to be removed when not in use. It is neat, relatively unobtrusive visually, and works well, still showing no sign of peeling away from the melodeon even after after 8 years of regular use.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

anotherboxplayer

  • Good talker
  • **
  • Offline Offline
  • Posts: 78
Re: Mics & Pick Ups
« Reply #6 on: July 27, 2012, 01:45:11 PM »

thanks Steve

glad to hear that vecro is secure enough - much less box damage!
Logged

Clive Williams

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3936
    • Home Page
Re: Mics & Pick Ups
« Reply #7 on: July 27, 2012, 01:52:19 PM »


They come with a mounting plate that you can attach to your box with a self hardening adhesive putty.
I didn't trust this and used screws.


I use the putty with my 416's, but I take it off again at the end of the gig - it's not left on the box permanently. I've re-used it umpteen times with no problems at all. A little bit of masking tape can be used to steer the cables nicely down the back of the box too.

Cheers,

Clive

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Mics & Pick Ups
« Reply #8 on: July 27, 2012, 11:26:21 PM »



"How do the 516's attach to your boxes - is it a stick back velcro arrangement like the microvox tends to be?"


Jez
They come with a mounting plate that you can attach to your box with a self hardening adhesive putty.
I didn't trust this and used screws.
I have since been told that the putty works well and can be removed with a sharp chisel when the time comes
to do so.
I also agree with what Ian has said about a stereo output from the B29L not being available and was one of the reasons I will go wireless.

Davied
So have you found a stereo wireless system which provides phantom power to 2 mics? If so I'm interested too...
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal