Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3   Go Down

Author Topic: Sibylla Brand GCF - Bellows problem  (Read 11434 times)

0 Members and 1 Guest are viewing this topic.

Daddy Long Les

  • Forum Librarian
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 1016
    • Daddy Long Les
Sibylla Brand GCF - Bellows problem
« on: August 06, 2012, 10:51:44 AM »

Hi,

I bought one of these the other day and was wondering if anyone on here has one like it?

It's certainly a fascinating little box.  Having played it for a few days my main concern is that the bellows are very "sloppy".  I've done all the usual tests for leaks and actually can't find any so maybe it's just the age of the box.  It's got a few tuning problems and reed issues (only one firing instead of two) - all this I know can be fixed but I'm not so sure about the bellows - I seem to be spending a lot of my playing time closing them. 

I'd only had it a few hours when the air button spring snapped but thanks to a suggestion from Lester, I was able to fix it with a safety pin.  This has proved to be very effective so I don't think that the air is escaping from this source.

The bottom line is I love the sound - wet in a sweet and folky way but not too wet so ideal for what I want.  Theo has certainly done a lovely job inside -pallets, reeds etc.  This work was done a few years ago but she still looks clean as a whistle - it's certainly cosy inside with all those notes to cram into such a small box!!  (It only weighs 6 lbs).

This is my first full three row box and I'm really enjoying all those extra notes and the row crossing.  I just hope that this bellows problem can be rectified - I guess I've been spoilt with all my other boxes that certainly don't have this problem.

Any thoughts would be appreciated.

Les

« Last Edit: August 06, 2012, 01:30:26 PM by Daddy Long Les »
Logged
Castagnari Lily DG,  Hohner Erica DG, Hohner Erica GC, Hohner Liliput Bb Eb, Hohner 4 stop in C

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Sibylla Brand GCF - Bellows problem
« Reply #1 on: August 06, 2012, 11:05:07 AM »

Hokay .. what do you mean by Sloppy ? , are they easy to pull and push without any buttons pressed ?.

if so you need to find where the air is escaping , my findings are that prime targets are bellows gasket (where the frames meet the ends), pallets front and rear, inside frame joints (where soundboard meets outer shell), bellows to bellows frame separation, various screws (strap mounts, grille screws or any others which penetrate the inside area of the box) and bellows gussest which can go porous or the glue cracks .

your tongue and face are the best things to feel for seeping air, get the general area with the face and finalize where its escaping from with the tongue  (I also have a mechanics stethoscope) ..

As for the reed not sounding, often its just stuck and a quick flick will get it sounding again , could be a bit of wood fibre etc
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Daddy Long Les

  • Forum Librarian
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 1016
    • Daddy Long Les
Re: Sibylla Brand GCF - Bellows problem
« Reply #2 on: August 06, 2012, 11:11:42 AM »

Hokay .. what do you mean by Sloppy ? , are they easy to pull and push without any buttons pressed ?.

if so you need to find where the air is escaping , my findings are that prime targets are bellows gasket (where the frames meet the ends), pallets front and rear, inside frame joints (where soundboard meets outer shell), bellows to bellows frame separation, various screws (strap mounts, grille screws or any others which penetrate the inside area of the box) and bellows gussest which can go porous or the glue cracks .

your tongue and face are the best things to feel for seeping air, get the general area with the face and finalize where its escaping from with the tongue  (I also have a mechanics stethoscope) ..

As for the reed not sounding, often its just stuck and a quick flick will get it sounding again , could be a bit of wood fibre etc

Thanks Adam.  The problem is that the bellows kind of fall open pretty easily with gravity.  There seems to be a fair amount of compression (quite hard to pull open or push shut with out pressing any buttons) so I don't think I've got a leak - I've tried all the moistened lips/ shining a torch etc. things and I can't detect a draught of any kind.

I'll try your trick with the reeds.

Les

Logged
Castagnari Lily DG,  Hohner Erica DG, Hohner Erica GC, Hohner Liliput Bb Eb, Hohner 4 stop in C

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Sibylla Brand GCF - Bellows problem
« Reply #3 on: August 06, 2012, 11:46:38 AM »

the better the sealing, the less chance of them falling open without pressing a button . there may be good compression meaning its not a serious leak but it`s leaks all the same . technically, the bellows shouldn`t open at all under gravity unless a button is pressed but few boxes are that well sealed . its harder to feel leaks through the pallets, you need to remove the grille.
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Sibylla Brand GCF - Bellows problem
« Reply #4 on: August 06, 2012, 11:47:07 AM »

The problem is that the bellows kind of fall open pretty easily with gravity. 
There seems to be a fair amount of compression (quite hard to pull open or push shut with out pressing any buttons) so I don't think I've got a leak

These two statements seem to be at variance with each other. If the bellows open under gravity air is leaking into the bellows somewhere. These things can be very hard to find especially by posting on forums  ;). Sure martyn will be able to help when he is back in circulation.

Daddy Long Les

  • Forum Librarian
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 1016
    • Daddy Long Les
Re: Sibylla Brand GCF - Bellows problem
« Reply #5 on: August 06, 2012, 12:11:37 PM »

The problem is that the bellows kind of fall open pretty easily with gravity. 
There seems to be a fair amount of compression (quite hard to pull open or push shut with out pressing any buttons) so I don't think I've got a leak

These two statements seem to be at variance with each other. If the bellows open under gravity air is leaking into the bellows somewhere. These things can be very hard to find especially by posting on forums  ;). Sure martyn will be able to help when he is back in circulation.

Yes  - it's a mystery isn't it?  Maybe I'm being fussy about an 80 year old box??!!  After all I don't work too well and I'm only 59!!! ;) ;) ;) - cue loads of jokes about valves, leaks, wheezing etc, etc.
Logged
Castagnari Lily DG,  Hohner Erica DG, Hohner Erica GC, Hohner Liliput Bb Eb, Hohner 4 stop in C

Daddy Long Les

  • Forum Librarian
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 1016
    • Daddy Long Les
Re: Sibylla Brand GCF - Bellows problem *IDENTIFIED*!!
« Reply #6 on: August 06, 2012, 01:29:57 PM »

Problem identified - it's the air button.  When I hold the air button up the bellows stop opening.  I've taken the bass grill off and my safety pin/spring repair on the air button isn't tight enough.  I've bunged some Blu-Tac into the hole on the other side but this has not helped at all.  Any suggestions other than removing the mechanism and opening out the safety pin even more?

At least I'm learning a lot about how it all works!!
Logged
Castagnari Lily DG,  Hohner Erica DG, Hohner Erica GC, Hohner Liliput Bb Eb, Hohner 4 stop in C

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Sibylla Brand GCF - Bellows problem
« Reply #7 on: August 07, 2012, 05:04:19 PM »

Spring strength is one thing, but how is the seal of the air button's pallet? May need to change the leather face if it's dry. And possibly all of the pallets' leather!
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Daddy Long Les

  • Forum Librarian
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 1016
    • Daddy Long Les
Re: Sibylla Brand GCF - Bellows problem
« Reply #8 on: August 07, 2012, 05:05:44 PM »

Spring strength is one thing, but how is the seal of the air button's pallet? May need to change the leather face if it's dry. And possibly all of the pallets' leather!

Thanks for this.  I'll look into it.
Logged
Castagnari Lily DG,  Hohner Erica DG, Hohner Erica GC, Hohner Liliput Bb Eb, Hohner 4 stop in C

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Sibylla Brand GCF - Bellows problem
« Reply #9 on: August 07, 2012, 05:30:27 PM »

If you check all the suggestions and still have air loss then you might have bellows that have become porous.  I found this recently on my 1930s Hohner Club.  Minute amounts of air were escaping from numerous places in the gussets and in the internal fold lines, and adding up to sugnificant air loss with the same symptoms you described. New bellows made a huge difference,  but you need to be sure before committing to a major spend like new bellows.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Daddy Long Les

  • Forum Librarian
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 1016
    • Daddy Long Les
Re: Sibylla Brand GCF - Bellows problem
« Reply #10 on: August 07, 2012, 05:56:45 PM »

If you check all the suggestions and still have air loss then you might have bellows that have become porous.  I found this recently on my 1930s Hohner Club.  Minute amounts of air were escaping from numerous places in the gussets and in the internal fold lines, and adding up to sugnificant air loss with the same symptoms you described. New bellows made a huge difference,  but you need to be sure before committing to a major spend like new bellows.
Yes, this is what I'm afraid of.  Obviously I'll get Martyn to check it out but just so I know, how much, roughly, would new bellows for this instrument cost and would I even be able to get them for such a weird sized instrument?

Logged
Castagnari Lily DG,  Hohner Erica DG, Hohner Erica GC, Hohner Liliput Bb Eb, Hohner 4 stop in C

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Sibylla Brand GCF - Bellows problem
« Reply #11 on: August 07, 2012, 05:59:33 PM »

Yes, this is what I'm afraid of.  Obviously I'll get Martyn to check it out but just so I know, how much, roughly, would new bellows for this instrument cost and would I even be able to get them for such a weird sized instrument?

http://www.theboxplace.co.uk/purchase/bellows/cat_12.html

Daddy Long Les

  • Forum Librarian
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 1016
    • Daddy Long Les
Re: Sibylla Brand GCF - Bellows problem
« Reply #12 on: August 07, 2012, 06:33:46 PM »

Ok - the air button repair didn't hold so I've removed the mechanism completely and very carefully plugged the air button hole with Blu-Tac.  The bellows are still opening and I can hear/feel air escaping from the bass end from the air button end - this is just from letting the bellows open - they're not under any load other than that of gravity.  I can't hear or feel any air coming from the bellows.  Is there any surefire way of finding out if the bellows are indeed porous?  It's going to be quite a while before anyone can look at this for me so I'm obviously anxious to at least know what I'm facing.

Be glad of any advice - as always!! ;)
Logged
Castagnari Lily DG,  Hohner Erica DG, Hohner Erica GC, Hohner Liliput Bb Eb, Hohner 4 stop in C

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Sibylla Brand GCF - Bellows problem
« Reply #13 on: August 07, 2012, 06:51:01 PM »

Ok - the air button repair didn't hold so I've removed the mechanism completely and very carefully plugged the air button hole with Blu-Tac.  The bellows are still opening and I can hear/feel air escaping from the bass end from the air button end - this is just from letting the bellows open - they're not under any load other than that of gravity.  I can't hear or feel any air coming from the bellows.  Is there any surefire way of finding out if the bellows are indeed porous?  It's going to be quite a while before anyone can look at this for me so I'm obviously anxious to at least know what I'm facing.

Be glad of any advice - as always!! ;)

Tracking down this sort of leak is a pain. You say you can hear/feel the air from "the air button end", do you mean from the air button or from its vicinity? One thing it could be is is that the seal between the fondo and the casework is leaking, find this on Hohners from time to time, I usually run some superglue around the joint to fix this but others may suggest other glue.

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Sibylla Brand GCF - Bellows problem
« Reply #14 on: August 07, 2012, 07:10:19 PM »

You could try putting some clingfilm over the bass end, initially covering the bellows seal, then peeling it back to just cover the end. You might even see the clingfilm move as you move the bellows.
I think you said you problem is on suck rather than blow, so it should pull in.

Similarly you could wrap some around the bellows. Might not be pretty, but if you can get it to seal (or tape it) then you might be able to identify the area of the leak more accurately.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Sibylla Brand GCF - Bellows problem
« Reply #15 on: August 07, 2012, 07:42:20 PM »

If you want to try a temporary seal of the air valve I would guess blutac would not be very good, masking tape much better.
If you can hear air escaping then my guess would be it is one or two gaps somewhere that are fixable. My experience of porus bellows is that the leaks are silent.
It just boils down to detective work I'm afraid and can be a complete pain.  Lesters suggestion is a good one, screw holes ate another possible leak site.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Daddy Long Les

  • Forum Librarian
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 1016
    • Daddy Long Les
Re: Sibylla Brand GCF - Bellows problem
« Reply #16 on: August 07, 2012, 08:30:38 PM »

Thanks to everyone for your kind help.  I'll start again tomorrow and try out all these suggestions. I'm sure it will be worth it in the end as the tone is really nice and the box is a joy to play.

This is all new to me as all the squeezeboxes I've bought thus far have been either nearly new or suitably prepared by an expert.  Guess I've been spoilt but I guess I can't complain seeing as this box is getting on a bit!!   (:) (:)
Logged
Castagnari Lily DG,  Hohner Erica DG, Hohner Erica GC, Hohner Liliput Bb Eb, Hohner 4 stop in C

Daddy Long Les

  • Forum Librarian
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 1016
    • Daddy Long Les
Re: Sibylla Brand GCF - Bellows problem
« Reply #17 on: August 08, 2012, 09:38:32 AM »

Ok - sealed the air button hole with several strips of masking tape (both sides).  Bellows still opening but nowhere near as much.  To be honest all of my boxes' bellows open in the same way (i.e with gravity) - this box is only a bit worse than this so I guess the problem lies with the air button.  I don't remember any problem with the bellows prior to the air button spring snapping but I only played it for a few hours before this happened and it wasn't something I was looking for!

Now, if I could only fix the air button mechanism!  Sadly, in trying to fit a stronger spring yesterday I snapped a bit of wood off the air button housing (the slot where the retaining pin goes through).  I could glue it but to be honest I doubt if it would hold for very long so I'm probably looking at a new block to be glued in place.  I think I'll leave that to someone who knows what they're doing.

Anyway - thanks for all the help.  Malcolm - the cling film worked a treat btw!!
Logged
Castagnari Lily DG,  Hohner Erica DG, Hohner Erica GC, Hohner Liliput Bb Eb, Hohner 4 stop in C

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Sibylla Brand GCF - Bellows problem
« Reply #18 on: August 08, 2012, 10:55:55 AM »

I`ve not seen inside the bass end but Theo & Owen will know if a Pokerwork airbutton / pallet mech could be fitted.

http://www.cgmmusical.co.uk/CGM_Musical_Services/Hohner_Parts.html#13
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Daddy Long Les

  • Forum Librarian
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 1016
    • Daddy Long Les
Re: Sibylla Brand GCF - Bellows problem
« Reply #19 on: August 08, 2012, 11:06:06 AM »

I`ve not seen inside the bass end but Theo & Owen will know if a Pokerwork airbutton / pallet mech could be fitted.

http://www.cgmmusical.co.uk/CGM_Musical_Services/Hohner_Parts.html#13

Don't think so as there's not enough room for the pallet.  I'll try and take a photo to show you.
Logged
Castagnari Lily DG,  Hohner Erica DG, Hohner Erica GC, Hohner Liliput Bb Eb, Hohner 4 stop in C
Pages: [1] 2 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal