Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 [3]   Go Down

Author Topic: Sibylla Brand GCF - Bellows problem  (Read 11436 times)

0 Members and 1 Guest are viewing this topic.

Daddy Long Les

  • Forum Librarian
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 1016
    • Daddy Long Les
Re: Sibylla Brand GCF - Bellows problem
« Reply #40 on: September 01, 2012, 08:37:42 AM »

Well Sybil is back from Martyn's. Lots of things fixed and Dedic-tuned.  She sounds really nice but she's still falling open way too much.  Martyn is going to do something with the bass pallets on Tuesday which he hopes might address the problem.  If not, I fear new bellows might be the only answer.

It occurred to me the other day that an instrument that probably cost  just a few Marks back in the thirties has caused something like £1000 to change hands in the last few years.  Crazy!!! :-\
Logged
Castagnari Lily DG,  Hohner Erica DG, Hohner Erica GC, Hohner Liliput Bb Eb, Hohner 4 stop in C

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Sibylla Brand GCF - Bellows problem
« Reply #41 on: September 01, 2012, 11:23:31 AM »

Hope he sorts it but if not,  Theo can get bellows custom made so no doubt Martyn can too while its there .

I`ve got a car like that box of yours (a 20yr old mid engined sports car) which is my only car .. it was in good nick and at a good price for what it is but needed a lot of steering and supension components due to age, then the Exhaust system (which isn`t easy or cheap on Mid engined cars), Rear tyres (weird sized due to their width which were a nightmare to find) then it needed some MOT work then the alternator packed up ..

Like Sybil, you can`t buy anything similar now unless you go for a Costalotti (expensive Italian whatever) so just keep on throwing money at it or end back up with something boring which will still need bits from time to time (same for Melodeons) .

Again, Like Sybil , I guess the answer was to pay a lot more to begin with for a fully fettled one - but also likewise, the uncommon-ness means you hardly get to pluck one off the shelf and that`ll need bits no doubt too pretty soon.

regarding My Boxes, I dread something going wrong with the Zupan (especially breaking one of those massive Voci AM Helikon reeds)  , Me fixing it would be like "tinkering" with a Bentley with a lump hammer and adjustable spanner :(  .. thankfully like Bentleys, there`s a lot less chance of it needing it in my lifetime despite being made in the 80s.
« Last Edit: September 01, 2012, 11:27:10 AM by Adam-T »
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Sibylla Brand GCF - Bellows problem
« Reply #42 on: September 01, 2012, 11:38:05 AM »

Hope he sorts it but if not,  Theo can get bellows custom made so no doubt Martyn can too while its there .


But you do want to be pretty sure that the bellows is the "real" problem before spending significant amounts of more money.  The mechanism, both treble and bass, on those boxes leaves a lot to be desired, and even when everything looks ok there can still be numerous tiny leaks that add up to a not-very-airtight box.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Daddy Long Les

  • Forum Librarian
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 1016
    • Daddy Long Les
Re: Sibylla Brand GCF - Bellows problem
« Reply #43 on: September 01, 2012, 11:58:26 AM »

Yes, it's turned into a bit of a nightmare but as you say Theo, I definitely won't be buying bellows unless I can be sure that will solve the problem.  Martyn doesn't seem to think that the bellows are the problem.  The air does seem to be escaping from the bass side so maybe what he does on Tuesday will help.  It's frustrating because I really love the sound/feel/look of this box. I'm sure that there were many of these made but it's the only one like this that I've seen.
Logged
Castagnari Lily DG,  Hohner Erica DG, Hohner Erica GC, Hohner Liliput Bb Eb, Hohner 4 stop in C

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Sibylla Brand GCF - Bellows problem
« Reply #44 on: September 01, 2012, 12:23:22 PM »

Very sensible.   The frustrating thing about some of these better quality Saxony boxes is that the reeds can sound very sweet, but the build quality of the action in particular, really lets them down badly. Once Hohner introduced their all metal action around 1930 that set a standard that the other German makers could never really reach.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Daddy Long Les

  • Forum Librarian
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 1016
    • Daddy Long Les
Re: Sibylla Brand GCF - Bellows problem
« Reply #45 on: September 06, 2012, 09:13:49 AM »

Ok - the saga continues. Spent five hours at Martyn White's workshop the other day where at no extra charge, he very kindly re-felted/leathered the bass pallets and pulled and tweaked generally.

Lester you would be interested to know that he found a leak on the treble side which he fixed by running wax around the place where the soundboard joins the casing.

Anyhow the upshot of all this is that Sybil is a bit tighter than she was and I'm just going to have to accept that this is "as good as it gets".

One small thing that made a big difference was tightening the bass strap so I am more in control of that side.

Start of a new term so up to my neck in school work but when the dust settles I'll do a blog that features her.
Logged
Castagnari Lily DG,  Hohner Erica DG, Hohner Erica GC, Hohner Liliput Bb Eb, Hohner 4 stop in C

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Sibylla Brand GCF - Bellows problem
« Reply #46 on: September 06, 2012, 09:41:08 AM »

Lester you would be interested to know that he found a leak on the treble side which he fixed by running wax around the place where the soundboard joins the casing.

Lester passed on the valuable tip of using Superglue for that, it only works when the gap is very narrow because it`ll run through larger gaps but the great thing about it is that it`s runny and gets to the leak like the old "leakfix" windscreen sealant used to on car screen leaks. I use PVA glue for larger gaps . I`ve still not worked out how to stop old hohner bellows frame corners from leaking yet though.

Glad to see that Sybil is finally on the road, and that Martyn threw in some goodwill work on it too :)
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Daddy Long Les

  • Forum Librarian
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 1016
    • Daddy Long Les
Re: Sibylla Brand GCF - Bellows problem
« Reply #47 on: September 06, 2012, 09:47:40 AM »

Lester you would be interested to know that he found a leak on the treble side which he fixed by running wax around the place where the soundboard joins the casing.

Lester passed on the valuable tip of using Superglue for that, it only works when the gap is very narrow because it`ll run through larger gaps but the great thing about it is that it`s runny and gets to the leak like the old "leakfix" windscreen sealant used to on car screen leaks. I use PVA glue for larger gaps . I`ve still not worked out how to stop old hohner bellows frame corners from leaking yet though.

Glad to see that Sybil is finally on the road, and that Martyn threw in some goodwill work on it too :)

Thanks Adam. 
Yep, Martyn is a really good chap who takes great pride about what goes out of his workshop.  I got coffee and biscuits too!! ;)
Logged
Castagnari Lily DG,  Hohner Erica DG, Hohner Erica GC, Hohner Liliput Bb Eb, Hohner 4 stop in C

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Sibylla Brand GCF - Bellows problem
« Reply #48 on: September 06, 2012, 09:52:30 AM »

His work looks superb, I wish my renovations (although deliberately "Aged" looking) were a fraction as good , I really like that Erika restoration he did .. I`m getting there eventually and I like the two I`ve done anyway and that`s what matters :)  ..
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Daddy Long Les

  • Forum Librarian
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 1016
    • Daddy Long Les
Re: Sibylla Brand GCF - Bellows problem
« Reply #49 on: September 06, 2012, 09:55:33 AM »

His work looks superb, I wish my renovations (although deliberately "Aged" looking) were a fraction as good , I really like that Erika restoration he did .. I`m getting there eventually and I like the two I`ve done anyway and that`s what matters :)  ..

Yes, I'm sorely tempted by one of his Bb/Eb 1930's Erikas.  I think it goes something like this "Er Jenny, you know I gave you my DG Erica well there's a gap on the shelf now......" ;D ;D ;D >:E >:E >:E
Logged
Castagnari Lily DG,  Hohner Erica DG, Hohner Erica GC, Hohner Liliput Bb Eb, Hohner 4 stop in C

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Sibylla Brand GCF - Bellows problem
« Reply #50 on: September 06, 2012, 10:35:55 AM »

I`d like one too - I love the loud powerful sound of the 30s 2915 shape Doubleray I rebuilt , those old zinc plate reeds scream one minute and are quiet and controlled the next (probably down to being played in for 80 years ?), same for the "Studerwerk" PA (basically the same box with uni reeds and a wooden piano leyboard stuffed on) same deal .

I need a Bb Eb box anyway though I`m leaning towards another Gonk or a very old fettler Steirische  - an old Oberhorner or Peter Stachl in need of valves etc would be ideal. I may however look an Erika in that key on German Fleabay , cash is the big issue here :( 
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Martyn

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 455
  • Hohnerohner
    • Martyn White Melodeon Tuning and Repairs
Re: Sibylla Brand GCF - Bellows problem
« Reply #51 on: September 06, 2012, 10:56:56 AM »

The reason for using wax instead of PVA to seal the gap is that the soundboard would have been glued in place with scotch glue.

One of the tricks I learnt during the many years I spent restoring antiques is, one of the best ways to clean off old scotch glue is to put some pva on it.
This will soften it and turn it to a jelly which can then be easily scraped off. I don't think Les would have thanked me if Syb ended up falling apart :o. Superglue I'm sure would also attack the scotch glue. Because reed wax has a much lower melting point than the glue, this I considered to be the safest and most effective method to use.

Martyn
« Last Edit: September 06, 2012, 10:58:31 AM by Martyn »
Logged
'Anything from a small repair to a full restoration'.
www.melodeonrepairs.co.uk

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Sibylla Brand GCF - Bellows problem
« Reply #52 on: September 06, 2012, 11:06:40 AM »

The reason for using wax instead of PVA to seal the gap is that the soundboard would have been glued in place with scotch glue.

One of the tricks I learnt during the many years I spent restoring antiques is, one of the best ways to clean off old scotch glue is to put some pva on it.

I love the stuff you learn from this forum ! . thanks Martyn - Apart from a 48 bass Galotta PA (weltmeister), I`ve only had to glue Hohners soundboard joins
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Sibylla Brand GCF - Bellows problem
« Reply #53 on: September 06, 2012, 11:12:49 AM »

The reason for using wax instead of PVA to seal the gap is that the soundboard would have been glued in place with scotch glue.

One of the tricks I learnt during the many years I spent restoring antiques is, one of the best ways to clean off old scotch glue is to put some pva on it.
This will soften it and turn it to a jelly which can then be easily scraped off. I don't think Les would have thanked me if Syb ended up falling apart :o. Superglue I'm sure would also attack the scotch glue. Because reed wax has a much lower melting point than the glue, this I considered to be the safest and most effective method to use.

Martyn

Interesting insights.   My instinct would have been to use scotch glue, where that was the original glue.  Is there a reason for preferring  wax?
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Martyn

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 455
  • Hohnerohner
    • Martyn White Melodeon Tuning and Repairs
Re: Sibylla Brand GCF - Bellows problem
« Reply #54 on: September 06, 2012, 11:33:06 AM »

Apart from it probably taking a couple of hours to get the old glue pot cleaned out and fired up :|bl you would really need to dismantle the joint, clean off all of the old glue and re-glue it for it to be an effective repair using scotch glue.

Martyn
« Last Edit: September 06, 2012, 11:52:00 AM by Martyn »
Logged
'Anything from a small repair to a full restoration'.
www.melodeonrepairs.co.uk

Daddy Long Les

  • Forum Librarian
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 1016
    • Daddy Long Les
Re: Sibylla Brand GCF - Bellows problem
« Reply #55 on: September 06, 2012, 06:01:35 PM »

Blog 20 which features Sibyl is now up if you want to have a look.

http://youtu.be/Hi2ZURYyxFM
Logged
Castagnari Lily DG,  Hohner Erica DG, Hohner Erica GC, Hohner Liliput Bb Eb, Hohner 4 stop in C

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Sibylla Brand GCF - Bellows problem
« Reply #56 on: September 06, 2012, 06:10:04 PM »

Exellent stuff ! the treble end doesn`t look any worse built than a Liliput ..
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Sibylla Brand GCF - Bellows problem
« Reply #57 on: September 06, 2012, 06:14:55 PM »



Lester passed on the valuable tip of using Superglue for that, it only works when the gap is very narrow because it`ll run through larger gaps but the great thing about it is that it`s runny and gets to the leak like the old "leakfix" windscreen sealant used to on car screen leaks.
[/quote]
If you check around wood workers supply stores, you will find that "superglue" comes in many forms now. Gap filling, extra thin, thick, and flexible ,to name a few.
 A simple tool you may find handy to find leaks, and that I find handy at the shop is a Doctors stethoscope that I cut off just before the disc, and add a piece of 1/8 in metal tube about 6 in long. You pass the tube end along a suspected leak area (while squeezing the box), and you will hear a "woosh" as you pass over the leak.
Works well for leaky pallets, as you can pass the tube along the edges, and between them.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Sibylla Brand GCF - Bellows problem
« Reply #58 on: September 06, 2012, 06:24:02 PM »

A simple tool you may find handy to find leaks, and that I find handy at the shop is a Doctors stethoscope that I cut off just before the

That`s exactly what I use , it`s invaluable . I also use a thin sliver of greaseproof paper to check pallets touching the board uniformly when there are pallet leaks - check an end at a time to see if the pallet grips the paper
Logged
Q: How do you cure MAD?
A: Buy more Boxes
Pages: 1 2 [3]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal