Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner Club 1 Buttons  (Read 2388 times)

0 Members and 1 Guest are viewing this topic.

jlofgr

  • Member
  • *
  • Offline Offline
  • Posts: 21
Hohner Club 1 Buttons
« on: August 16, 2012, 02:22:46 AM »

If anyone has two treble buttons for a Hohner Club 1 that they are willing to sell, I would be most thankful. 
This box has the 7/16 diameter white plastic ones with a screw through the middle to hold on the black wood spacer.
They can be discolored as most of the originals are.  I can send cash and a pos paid mailer.   Regards, Jim Lofgren
 
Logged
B/C German Erica Tuned Pretty dry by Michael J. Arralde.  Long time PA player with less than 2 months on the Melodion.  This thing is actually
sinking in.  I can see the addiction..

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Hohner Club 1 Buttons
« Reply #1 on: August 16, 2012, 09:18:51 AM »

If anyone has two treble buttons for a Hohner Club 1 that they are willing to sell, I would be most thankful. 
This box has the 7/16 diameter white plastic ones with a screw through the middle to hold on the black wood spacer.
They can be discolored as most of the originals are.  I can send cash and a pos paid mailer.   Regards, Jim Lofgren
Charlie Marshall is based in Scotland, but ships to foreign parts too. Great service and products!
http://www.cgmmusical.co.uk/CGM_Musical_Services/Welcome.html

A button which is 7/16 diameter (I presume you mean inches) equates to 11.1 mm dia. The nearest size Charlie has is 12 mm which is possibly close enough? Old Hohner parts would probably originally have been in metric units anyway.
http://www.cgmmusical.co.uk/CGM_Musical_Services/Treble_Bass_Buttons.html#35

Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

jlofgr

  • Member
  • *
  • Offline Offline
  • Posts: 21
Re: Hohner Club 1 Buttons
« Reply #2 on: August 17, 2012, 12:29:26 AM »

Eck...I measure this with a metric caliper and it came out to slightly over 11 mm.  Looks like I'm in for a hunt.  I may be
exploring sewing buttons.  :(
Logged
B/C German Erica Tuned Pretty dry by Michael J. Arralde.  Long time PA player with less than 2 months on the Melodion.  This thing is actually
sinking in.  I can see the addiction..

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Hohner Club 1 Buttons
« Reply #3 on: August 17, 2012, 01:11:18 AM »

If anyone has two treble buttons for a Hohner Club 1 that they are willing to sell, I would be most thankful. 
This box has the 7/16 diameter white plastic ones with a screw through the middle to hold on the black wood spacer.
They can be discolored as most of the originals are.  I can send cash and a pos paid mailer.   Regards, Jim Lofgren

Also try the Buttonbox, or Liberty Bellows (in Philadelphia). I have sought and found old parts from both places and they are quite reasonable.
Logged

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Hohner Club 1 Buttons
« Reply #4 on: August 20, 2012, 01:14:21 PM »

I wonder whether the oversize replacements could be turned down on a lathe?  Is it the type with a built in screw you need or the older ones with a removable screw?  It might be possible with either type to get them centred quite acurately, though it might be a case of gently applying a file rather than a cutting tool to work them down to size.

Rob.
Logged

jlofgr

  • Member
  • *
  • Offline Offline
  • Posts: 21
Re: Hohner Club 1 Buttons
« Reply #5 on: August 20, 2012, 01:56:16 PM »

It is the older ones with a removeable screw.  I'm beginning to think about using sewing buttons.  I haven't exhaused all my possiblilities yet...  Jim
Logged
B/C German Erica Tuned Pretty dry by Michael J. Arralde.  Long time PA player with less than 2 months on the Melodion.  This thing is actually
sinking in.  I can see the addiction..

jlofgr

  • Member
  • *
  • Offline Offline
  • Posts: 21
Re: Hohner Club 1 Buttons
« Reply #6 on: September 09, 2012, 09:04:19 AM »

Ok, I figured it out...older buttons are just not available...Ebay had pieces of an old accordion that had buttons that would
probably work, but the cost was prohibitive.  I visited sewing stores looking for the right size button that could be used to no avail.  With two buttons missing, I decided to replace all the buttons.  I did get an email from Hohner, that they could supply Erica buttons, but I already had a plan by then.  I bought 7/16 inch (11.1mm) wood dowel and cut 12ea. 6 inch lengths.  Then I took white celuloid from PA treble keys, trimmed and glued it to the ends of the dowels.  (24 total ends).
This gave me a couple extra.  I trimmed them to size on  disc/belt sander and then hand sanded them to completion.  Chopped them off in cutoff saw and they look great!  A little white paint to the dowel and I'm in business!   ;D  Jim
Logged
B/C German Erica Tuned Pretty dry by Michael J. Arralde.  Long time PA player with less than 2 months on the Melodion.  This thing is actually
sinking in.  I can see the addiction..

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: Hohner Club 1 Buttons
« Reply #7 on: September 09, 2012, 06:13:14 PM »

I bought 7/16 inch (11.1mm) wood dowel and cut 12ea. 6 inch lengths.  Then I took white celuloid from PA treble keys, trimmed and glued it to the ends of the dowels.  (24 total ends).
This gave me a couple extra.  I trimmed them to size on  disc/belt sander and then hand sanded them to completion.  Chopped them off in cutoff saw and they look great!  A little white paint to the dowel and I'm in business!   ;D  Jim

I would like to see a picture?

Stephen
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

jlofgr

  • Member
  • *
  • Offline Offline
  • Posts: 21
Re: Hohner Club 1 Buttons
« Reply #8 on: October 13, 2012, 02:52:00 PM »

Finally got time to make these and snap a picture.  Still a little fine finishing on the celluloid.  Takes a while to make 21 of these babies.  I will use hide glue to attach unless someone has a better idea.  I also think I will paint the body of them Black.  It's fun not to have to be in a hurry.....Jim
Logged
B/C German Erica Tuned Pretty dry by Michael J. Arralde.  Long time PA player with less than 2 months on the Melodion.  This thing is actually
sinking in.  I can see the addiction..

jlofgr

  • Member
  • *
  • Offline Offline
  • Posts: 21
Re: Hohner Club 1 Buttons
« Reply #9 on: October 13, 2012, 02:54:16 PM »

The picture is a bit of an illusion...the buttons are identical height and width at the tops...Jim
Logged
B/C German Erica Tuned Pretty dry by Michael J. Arralde.  Long time PA player with less than 2 months on the Melodion.  This thing is actually
sinking in.  I can see the addiction..

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Hohner Club 1 Buttons
« Reply #10 on: October 13, 2012, 03:36:35 PM »

I suppose it's too late to change now!  It would be tempting to have put a matching screw through the dowel before applying the celluloid so they could just be screwed back on.  I doubt you will find any double ended screws small enough, but maybe you could cut heads off screws and cut a thread onto the shank.  Very fiddly, but possible.  Even if you're going to glue them on it may make them more robust if you drill into the action and button so as to insert a metal stud.

Rob.
Logged

jlofgr

  • Member
  • *
  • Offline Offline
  • Posts: 21
Re: Hohner Club 1 Buttons
« Reply #11 on: October 13, 2012, 04:48:27 PM »

That would be ideal, but unfortunately some of the actions are off center in the holes, thus the screws or studs would have to be off center.  I'm not that good a machinist.  The squared piece of wood glued to the bottom of the buttons allows for off-cenered actions.  The screw merely holds the cap to the spacer. 
Logged
B/C German Erica Tuned Pretty dry by Michael J. Arralde.  Long time PA player with less than 2 months on the Melodion.  This thing is actually
sinking in.  I can see the addiction..
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal