Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Front end for Presswood - or two row action  (Read 1288 times)

0 Members and 1 Guest are viewing this topic.

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Front end for Presswood - or two row action
« on: August 18, 2012, 09:55:43 PM »

Hi,
I am interested in either a front section for a Hohner Presswood style box, or a complete (or maybe complete-ish) two row Hohner action.

Anyone got the above kicking around and looking for a home?

TIA
Malcolm
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Front end for Presswood - or two row action
« Reply #1 on: August 18, 2012, 11:16:08 PM »

I can't help but be reminded here of melodeon's thread from ages ago -- his poor, presswood pokerwork of unknown provenance with a severely burned treble case (which now resides at my house and sounds glorious). A solution couldn't be found to make it whole again except to replace the whole end of the accordion, which was too much work.

While I don't have a spare presswood treble end, I do have a spare Hohner treble action from another box which is quite grubby, although the arms are straight. The pallets will need cleaning and new padding. The keyboard cover is not serviceable. PM me if nothing else turns up. Cheers.
 

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Front end for Presswood - or two row action
« Reply #2 on: August 19, 2012, 07:42:31 AM »

I can't help but be reminded here of melodeon's thread from ages ago -- his poor, presswood pokerwork of unknown provenance with a severely burned treble case (which now resides at my house and sounds glorious). A solution couldn't be found to make it whole again except to replace the whole end of the accordion, which was too much work.

of course all this hinges on the age of the presswood - some had deep bellows frames and narrow ends - other wise it`d just be a case of swapping the reedblocks and whatever else was savable such as the treble mech onto the new front end (about 15 mins work at most) - you can buy new pokerwork ends from Charlie Marshall ..
Logged
Q: How do you cure MAD?
A: Buy more Boxes

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Front end for Presswood - or two row action
« Reply #3 on: August 19, 2012, 09:17:05 AM »

The box was originally bought as a donor. I have another pre-war German two row project box, with celluloid finish, but it has a gleichton and I'm not sure about this gleichton lark.
The presswood is about the same age, with H reeds, so block swapping looks possible and there's a few other bits I could usefully nick.

However... >:E      (wonder how many others have been here) ::)

I rather like the presswood looks, the bellows seem to be in good shape (need a rebind but seem to hold air), the reeds go between light surface rust and immaculate. The grille and bass mechanism are recoverable. Metal corners have acquired a certain "lived in" character, but OK.
There is a piece of wood broken from the front of the treble box, repairable but right where it will notice, the treble mechanism is broken and rusty, one pallet is missing, and it lacks a fingerboard and most straps.

So presently undecided which way to go  :-\  I don't want to spend much, and although Charlie's complete ready to go mechanism is very tempting (and IMO reasonably priced), it does put a dent in the economics of a repair.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal