Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Picked up an old Hohner G/C, looking for advice...  (Read 2307 times)

0 Members and 1 Guest are viewing this topic.

Michael Eskin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 547
    • AppCordions
Picked up an old Hohner G/C, looking for advice...
« on: August 27, 2012, 04:52:26 PM »

Hi y'all,

I just picked up a sweet little 1930s vintage Hohner G/C tuned two-row
(see attached photo) from Craigslist for $65.00.

It's in amazing shape from what I can tell without opening it up,
bellows seem like new, the whole instrument is very clean and
airtight,  just needs a tune-up of some notes and has one high note
that doesn't sound in one direction on one note on the C row.

Since I play B/C for Irish, this instrument is of limited use to me since it
doesn't have a C# anywhere on it.  Specifically, I need the C# one
octave above middle C, commonly used in Irish tunes in D major and E
Dorian mode.

I'm considering having my local repairman tune up the instrument and
see about having a couple of C# reeds put on the G-row and putting the B and E notes
in the same locations as they would be on a B/C, don't much care about the
other notes.

Is this even possible? Anyone else done this sort of conversion?

Alternatively, I could track down a full set of reeds for the B-row
and do a full row conversion if that's the more cost-effective alternative.

Thanks for any advice,

Michael




Logged

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Picked up an old Hohner G/C, looking for advice...
« Reply #1 on: August 27, 2012, 05:22:05 PM »

I have recently converted an exact same box from C/F to B/C by transplanting reed blocks and reeds from other Pokerwork-like donors and re-tuning bass reeds. I think it's worth having a B row set up, it would give you the real thing! Also think about replacing the pallets facings, these boxes are usually very "clickety". If you need to replace parts, all of the current 2915-model parts will fit.
« Last Edit: August 27, 2012, 05:23:49 PM by Québécois »
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

deltasalmon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1002
Re: Picked up an old Hohner G/C, looking for advice...
« Reply #2 on: August 27, 2012, 06:04:01 PM »

I would be interested in how this turns out. I have almost the exact same instrument and the same issue of wanting B/C (or similar semi-tone tuning). Regardless of tuning I think it would need new reeds because the current ones are in pretty bad shape; out of tune and the valves are in bad shape or missing.
Logged
Sean McGinnis
Bordentown City, NJ, USA

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Picked up an old Hohner G/C, looking for advice...
« Reply #3 on: August 27, 2012, 07:27:58 PM »

All possible, but whatever you do I recommend re-using as many as possible of the original reeds.  They are different in sound compared with later Hohner reeds.

It is possible if you know someone with the right skills to re-use almost all of the G row reeds to make a B row.  You will need a new pair of reeds for the very top F#/G#, and the first button on the C row will be slightly different.  The bass is quite similar too, I think only one pair of buttons needs to be altered.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Michael Eskin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 547
    • AppCordions
Re: Picked up an old Hohner G/C, looking for advice...
« Reply #4 on: August 27, 2012, 08:09:56 PM »

Thank you everyone for all the great advice!

I took the treble end off this morning, looks absolute pristine inside. The reed blocks are marked GC 880.
« Last Edit: August 27, 2012, 08:32:04 PM by seisiuneer »
Logged

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Picked up an old Hohner G/C, looking for advice...
« Reply #5 on: August 27, 2012, 08:44:47 PM »

That as far as I know means that they`re A440 concert pitch - never did know why they put 880 on them and not 440 though ..

I laughed After reading this thread as I have one of these 30s zinc reeded 2915 series boxes (labelled Double Ray) in B/C in appalling cosmetic condition but with in tune and re-valved reeds .. I call it the Swamp Monster ;-)
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Michael Eskin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 547
    • AppCordions
Re: Picked up an old Hohner G/C, looking for advice...
« Reply #6 on: August 27, 2012, 09:06:00 PM »

Is a replacement reed block in B easily obtained?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Picked up an old Hohner G/C, looking for advice...
« Reply #7 on: August 27, 2012, 09:10:13 PM »

Not on its own, and if you get a new Hohner reedblock it will sound different from the C row, you would need to fit a gasket to the base of the reed block, and the fixings are slightly different and might need a very simple bit of woodwork to get it to fit.  If you have a local repair man who likes working on old Hohner diatonics then that is you best way forward.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Picked up an old Hohner G/C, looking for advice...
« Reply #8 on: August 28, 2012, 03:31:17 PM »

Here is one in action here
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

deltasalmon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1002
Re: Picked up an old Hohner G/C, looking for advice...
« Reply #9 on: August 30, 2012, 12:47:34 PM »

Quote
It is possible if you know someone with the right skills to re-use almost all of the G row reeds to make a B row.  You will need a new pair of reeds for the very top F#/G#, and the first button on the C row will be slightly different.  The bass is quite similar too, I think only one pair of buttons needs to be altered.

So I'm generalizing this but the idea would be to move all the reeds in the G-row down a spot on the reed block and then just tuning either the push or pull up half a step to match what a B-row would do. And at times maybe turn the reed around so that the push becomes the pull and vice versa? Would you have to modify the block at all since you're putting a smaller reed in?

What sort of modification would be needed for the buttons?
Logged
Sean McGinnis
Bordentown City, NJ, USA

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Picked up an old Hohner G/C, looking for advice...
« Reply #10 on: August 30, 2012, 01:13:48 PM »

Yes, that is the general idea.   Some of the higher notes will need to be altered by more than a semitone.  Probably no modification will be needed to the blocks.  Sometimes a thin slip of wood is needed under plates that are too short just so the chamber is covered, or you can fill in the top of an over long chamber with a small block of wood.  Hohner 2915 reedblocks are usually all the same height regardless of the pitch of the reeds, so it is usual on DG blocks for example to find a strip of wood running the full length of the block to take up the extra space.  You will even see this on most Italian DGs.

Buttons wouldn't usually need any modification as a result of the change of tuning.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal