Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner 2915 DoubleRay renovation  (Read 5267 times)

0 Members and 1 Guest are viewing this topic.

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Hohner 2915 DoubleRay renovation
« on: September 03, 2012, 07:48:02 AM »

After doing the 4 stop renovation and liking it a lot, I`ve decided to do the "Swampmonster" Doubleray , a mechanically fettled pokerwork shaped zinc reeded 1930s box in B/C in the most terrible cosmetic condition as you can see from the pics below .
       Originally I wasn`t going to due to it having been sold by Forbes around the time Jimmy Shand was working there but there are dozens of these boxes around and the finish & lettering on this one is really beyond saving and it looks ghastly, it was fun having a Rat box for a while but the HA114 has driven me on to tidy this too, thankfully it`s painted and not covered in Celluloid..
       I`ve already done the Grille in black (it was originally painted and not chromed) and the Painted Zinc corners will come up like the steel ones on the 114 did . Ideally I`d like a wooden fingerboard, as you can see this one is trashed, I do have a plastic one which I may fit for now and get one of the new wooden ones (but it`ll look too new) ..
       I`ve sanded and oiled the front section yesterday (had a gig all morning so spread it over the day) , I`ll re-fit the hardware and see how it looks and strip the bass end for Nitromors/sanding today. I`ve read the tips on removing bass buttons from 2915s (using a soldering iron on the shaft -

Not sure whether to re-use the old yellowed crazed buttons or get new ones - same with the treble end, If I replace all the buttons AND do the felt on the pallets (£38 to the door) , I`m over half way to paying for a complete New mech with those bits on (under £60) so may just do the felt and leave the old looking buttons, really depends on if I get a new wood fingerboard really.
 
Anyway - pics as is + done grille, as before I`ll post pics as it progresses..

Logged
Q: How do you cure MAD?
A: Buy more Boxes

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Hohner 2915 DoubleRay renovation
« Reply #1 on: September 03, 2012, 07:48:45 AM »

Button and fingerboard condition and done grille

Logged
Q: How do you cure MAD?
A: Buy more Boxes

brianread

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1012
    • Slow and Steady Session in West Lancashire/Greater Manchester; Dance club in Rainford
Re: Hohner 2915 DoubleRay renovation
« Reply #2 on: September 03, 2012, 09:38:57 AM »

       I`ve already done the Grille in black (it was originally painted and not chromed)

mmm, I like that - perhaps I could do my chromed front grill on my Pokerwork like that?  I'd have to clean it up (rust etc), what sort of paint to use?
Logged
Brian Read
D/G Oakwood (new model), D/G, C /F, Bb/Eb and E/A Liliputs,
A STREB!!,
2.5 D/G Self made Emmanuel Pariselle, D/G Pokerwork,
and Wolverton Advanced G/D Anglo Concertina and C/G  1937 Wheatstone.
all played "lefty" with mostly an extra air button, except the Concertinas which I play the conventional way round.

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Hohner 2915 renovation Treb-End
« Reply #3 on: September 03, 2012, 11:38:06 AM »

The 2915`s front end is done apart from a Hohner Logo, I`ve asked Charlie Marshall about getting the Morgane stick on one - if not I could photograph one, print it out and layer it under perspex or as Charlie suggested, use fancy Letraset . Dunno . Ideally I`d like it burned into the wood or as wooden letters like some Costalottis have. I screwed the "Steel Reeds" badge on as I had screws leftover from upgrading the tiny ones on the treb mech mounting. I have two left for the Forbes badge :)

Anyway here`s the treble end done - the Black grille goes well with the plastic fingerboard - I used Satin black car Aerosol Brian , as you can see from the orig pics, it was 90% rust and 10% old paint. the treble buttons after 80yrs of age look like bone and match the wood ..

Logged
Q: How do you cure MAD?
A: Buy more Boxes

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Hohner 2915 DoubleRay renovation
« Reply #4 on: September 03, 2012, 08:35:34 PM »

The rear end over the day inbetween work has been NitroMors'D, sanded and the last coat of finishing oil has gone on - the bass pallets and air button have been re-faced too, it`ll be re-assembled tomorrow . I`ll post pics with the old Bass strap (which is amazingly in good nick) but it`ll inherit the beige felt backed one from the Hlavacek when I get that a decent Padded bass strap & Adjustable mount setup . It`ll be getting Morgane style bellows straps (only better quality)

For the record,  in the end as I wanted to retain the yellow buttons, I removed the bass mech by removing the little bent nails acting as pivots on the button Rods, this meant that I could remove the rods with the buttons still on,  it also makes the bass mech easier to fit and hot-gluing the pallets back on easier and whisker free .. The Treble Pallets will get done at a later date as they`re a lot easier to sort.
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Hohner 2915 DoubleRay renovation
« Reply #5 on: September 03, 2012, 08:40:35 PM »

For the record,  in the end as I wanted to retain the yellow buttons, I removed the bass mech by removing the little bent nails acting as pivots on the button Rods, this meant that I could remove the rods with the buttons still on,  it also makes the bass mech easier to fit and hot-gluing the pallets back on easier and whisker free .. The Treble Pallets will get done at a later date as they`re a lot easier to sort.

Hope you marked the bass rods in  some manner. The first time I did it I didn't and it took ages to get them back in the right holes  :o

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Hohner 2915 DoubleRay renovation
« Reply #6 on: September 03, 2012, 08:44:39 PM »

LOL yes, I numbered them - so long as I can remember where I numbered them from -  :o .... One of the pivot nails broke but thankfully the Steel reeds badge was held on with the same nails and I`ve put that badge back on with screws .. this box is going to look real good.

the funny "burn" marks in the wood on the top (and on the other end) were under the paint - weird
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Hohner 2915 DoubleRay renovation
« Reply #7 on: September 03, 2012, 08:48:06 PM »

LOL yes, I numbered them - so long as I can remember where I numbered them from -  :o .... One of the pivot nails broke but thankfully the Steel reeds badge was held on with the same nails and I`ve put that badge back on with screws .. this box is going to look real good.

the funny "burn" marks in the wood on the top (and on the other end) were under the paint - weirf

Wouldn't reuse the old nails as I find the straightening and rebending weakens them and they fail, if you are lucky when you refit them or, if unlucky, later at a more inconvenient time. I use B&Q veneer pins which are just the right size.

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Hohner 2915 DoubleRay renovation
« Reply #8 on: September 03, 2012, 08:52:27 PM »

Thanks Lester I`ll get some .....
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Mike Hirst

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1433
  • Black Dot B/C, Bastardo C#/D, Corona II GCF
Re: Hohner 2915 DoubleRay renovation
« Reply #9 on: September 03, 2012, 09:16:08 PM »

LOL yes, I numbered them - so long as I can remember where I numbered them from -  :o .... One of the pivot nails broke but thankfully the Steel reeds badge was held on with the same nails and I`ve put that badge back on with screws .. this box is going to look real good.

the funny "burn" marks in the wood on the top (and on the other end) were under the paint - weirf

Wouldn't reuse the old nails as I find the straightening and rebending weakens them and they fail, if you are lucky when you refit them or, if unlucky, later at a more inconvenient time. I use B&Q veneer pins which are just the right size.

I note that the word 'weird' from the original post has morphed into the new word 'weirf'.  I have three possible definitions for 'weirf' (none of which are appropriate):

http://www.urbandictionary.com/define.php?term=weirf

weird ???
Logged
Semper idem, sed non eodem modo

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Hohner 2915 DoubleRay renovation
« Reply #10 on: September 03, 2012, 09:38:32 PM »

I`m just glad the Box didn`t end up like the first description -  :-X
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
2915 renovation Finished
« Reply #11 on: September 04, 2012, 11:33:55 AM »

The 2915 renovation is Finished woodwise -

there are little bits to do such as get the Italian Morgane style bellows straps, replace the original bass strap with the Heligonka one (which means buying an expensive adjustable one for the Heligonka which I need to do) - I think I`d prefer a new chrome grille and a natural wood fingerboard but you`re looking at £50 the pair & the fingerboard would need Ageing to match - the black looks different and not unpleasant .. As the box has single strap brackets, I can use a nice beige Delicia strap from the Heligonka (they don`t have buckle ends so only fit by removing the brackets IF they`re open type like this)

Pics of the Finished box (minus various new straps) - it now looks as good (to me anyway) as it sounds

Logged
Q: How do you cure MAD?
A: Buy more Boxes

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Hohner 2915 DoubleRay renovation
« Reply #12 on: September 04, 2012, 11:47:29 AM »

I like that  (:)

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Hohner 2915 FINISHED
« Reply #13 on: September 08, 2012, 01:04:27 PM »

Thanks Lester . I think opinion maybe polarised on this one (more love or hate than the 114 due to the mix of ancient and modern) but I really like it and it plays like a dream - I`ll have to learn some Irish B/C tunes or use it as two 1 rows as I usually do with chromatic melodeons, LOL ..

Well the Box is Finished - I didn`t go for the Czech bass strap but instead used a new Hohner type one . the Bellows Straps are Dino-Baffetti Originals , not shown is the Delicia Shoulder strap

Just in case anyone is interested - before and after pics ........ Swampmonster to Larkrise .

Logged
Q: How do you cure MAD?
A: Buy more Boxes

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Hohner 2915 DoubleRay renovation
« Reply #14 on: September 08, 2012, 01:08:05 PM »

Hope you have hung on to the old keyboard. One of my current projects is to replace the front of a very similar one. I have cut the old front off and produced the drilling template for the new front, and, then customers have got in the way of progress  :D

ps. Can we expect a video of the box any time?  ;)

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Hohner 2915 DoubleRay renovation
« Reply #15 on: September 08, 2012, 01:20:25 PM »

Hope you have hung on to the old keyboard. One of my current projects is to replace the front of a very similar one. I have cut the old front off and produced the drilling template for the new front, and, then customers have got in the way of progress  :D

ps. Can we expect a video of the box any time?  ;)

I have hung on to the fingerboard for exactly that reason

Yes I WILL BE trying a video - I HATE doing the things as everything goes wrong when I do it - far worse than playing a gig . The Original D-Rays had oddball basses , the inner row's main pair of buttons are normal, the outer Row`s main pair are setup for playing the B row on it own (fine) but the inner Four buttons are setup for weird french Minor key tunes playing by the sound of them so I`m going to make up a french-esque tune which uses them . if this was in DG it`d be a killer Morris box , it strips paint one minute and lullabys the next, it`s gotta be the best "Pokerwork" I`ve heard (With Hohner reeds in anyway)  .

Addition - Next move is to get another Student-1 rear end, sand it down to look the same and use that . I tried the bum-end off my own "Studerwerk"  and it fits and plays better in BC being stradella
« Last Edit: September 08, 2012, 01:26:07 PM by Adam-T »
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Hohner 2915 DoubleRay renovation
« Reply #16 on: September 10, 2012, 11:36:26 AM »

One thing about the Fingerboard - at least the holes won`t need to be elongated if you put travel stop felt in there .. Club ones aren`t
Logged
Q: How do you cure MAD?
A: Buy more Boxes

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Hohner 2915 DoubleRay renovation
« Reply #17 on: September 10, 2012, 12:10:38 PM »

One of my current projects is to replace the front of a very similar one. I have cut the old front off and produced the drilling template for the new front, and, then customers have got in the way of progress  :D
So are you replacing the fingerboard, or just the deck? I have a Presswood with the wood broken out between the rows. Wondering how best to repair it, since I want to keep the patterning/motif. Haven't taken it off and had a good look yet, though.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal