Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: fitting stops to a hohner 2 voice  (Read 2939 times)

0 Members and 1 Guest are viewing this topic.

boxer

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 380
  • B/C Pokerwork - ultimate ceili box
fitting stops to a hohner 2 voice
« on: September 09, 2012, 02:26:37 PM »

calling all experts:

has anyone ever fitted / tried to fit treble stops / a treble stop to a 2-voice Hohner such as a Pokerwork or Black Dot?

I ask because the idea of cutting out a reed and losing some of the instument's stridency when accompanying occasional songs would be attractive, and changing stops would be less trouble than (as I presently do) taking a second, sweeter sounding box along and having another ton of cables. pickups and power units to set up, and another instument to trip over.

hope you've got some ideas
Logged
Nuage, Tommy, Cairdin, 
Double Ray DLX 21x12, Black Dot,
Pre-Erica, Pokerwork
plus various stringed things

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: fitting stops to a hohner 2 voice
« Reply #1 on: September 09, 2012, 04:38:29 PM »

Yes, I did it once (in 1980). I fitted two stops, one for each row. It proved quite handy as I could play a sweet, single voice tune in D and then launch into a two voice tremolo tune in G.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

boxer

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 380
  • B/C Pokerwork - ultimate ceili box
Re: fitting stops to a hohner 2 voice
« Reply #2 on: September 09, 2012, 05:48:39 PM »

That's heartening news Rees.

where did you get the necessary bits?
Logged
Nuage, Tommy, Cairdin, 
Double Ray DLX 21x12, Black Dot,
Pre-Erica, Pokerwork
plus various stringed things

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: fitting stops to a hohner 2 voice
« Reply #3 on: September 09, 2012, 05:56:06 PM »

That's heartening news Rees.

where did you get the necessary bits?

Well, this was over 30 years ago so no internet and no spares network.
I made my own stop slides and knobs. I used some thin steel sheet for the slides and turned some brass knobs on the lathe (I was on the night shift in the engineering dept. at a cheese factory - say no more  ;) )
These days I use 1.5mm aircraft ply for the slides but Charlie Marshall at CGM probably has some ready made slides (be aware that Hohner button spacing is 20mm and Italian is 19mm).
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

boxer

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 380
  • B/C Pokerwork - ultimate ceili box
Re: fitting stops to a hohner 2 voice
« Reply #4 on: September 10, 2012, 12:12:42 AM »

many thanks for your help Rees
Logged
Nuage, Tommy, Cairdin, 
Double Ray DLX 21x12, Black Dot,
Pre-Erica, Pokerwork
plus various stringed things

Mike Hirst

  • Hero Member
  • *****
  • Online Online
  • Posts: 1433
  • Black Dot B/C, Bastardo C#/D, Corona II GCF
Re: fitting stops to a hohner 2 voice
« Reply #5 on: September 10, 2012, 09:19:17 AM »

It might be worth considering using the Hohner Terzett as a starting point.
Logged
Semper idem, sed non eodem modo

boxer

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 380
  • B/C Pokerwork - ultimate ceili box
Re: fitting stops to a hohner 2 voice
« Reply #6 on: September 10, 2012, 05:52:48 PM »

hi Mike

sadly most of the stuff seems to be in German, which isn't my strongest suit

could you outline what the Terzett offers please?

thanks 
Logged
Nuage, Tommy, Cairdin, 
Double Ray DLX 21x12, Black Dot,
Pre-Erica, Pokerwork
plus various stringed things

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: fitting stops to a hohner 2 voice
« Reply #7 on: September 10, 2012, 06:10:36 PM »

The salient point about the Terzett on that page is this one:  Zur Zeit nicht am Lager = currently not in stock.

My local tuner/repairman/wizard Yves Hélie converted an Erica for one of his students who wanted to learn D/G and B/C. It has a single voice in either tuning and a stop switches between the two.

boxer

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 380
  • B/C Pokerwork - ultimate ceili box
Re: fitting stops to a hohner 2 voice
« Reply #8 on: September 10, 2012, 11:58:28 PM »

thanks for the translation Steve
Logged
Nuage, Tommy, Cairdin, 
Double Ray DLX 21x12, Black Dot,
Pre-Erica, Pokerwork
plus various stringed things

Microbot

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 345
Re: fitting stops to a hohner 2 voice
« Reply #9 on: May 25, 2013, 04:25:02 PM »

Hi Boxer, Rees, Steve and all,

I've just completed a D/G Pressed Wood with Treble stop to switch from 2 voice to 1 voice. I absolutely love it - the motive behind Phillip Beamont asking me to make the instrument was, as with the original post by Boxer, for song accompaniment.

It's on my soundcloud link at ...

https://soundcloud.com/stream

cheers

Mike R
Logged

brianread

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1012
    • Slow and Steady Session in West Lancashire/Greater Manchester; Dance club in Rainford
Re: fitting stops to a hohner 2 voice
« Reply #10 on: May 25, 2013, 05:52:34 PM »

Hi Boxer, Rees, Steve and all,

It's on my soundcloud link at ...

https://soundcloud.com/stream


No its not  - link takes me to a "can't find" page.
Logged
Brian Read
D/G Oakwood (new model), D/G, C /F, Bb/Eb and E/A Liliputs,
A STREB!!,
2.5 D/G Self made Emmanuel Pariselle, D/G Pokerwork,
and Wolverton Advanced G/D Anglo Concertina and C/G  1937 Wheatstone.
all played "lefty" with mostly an extra air button, except the Concertinas which I play the conventional way round.

Microbot

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 345
Re: fitting stops to a hohner 2 voice
« Reply #11 on: May 25, 2013, 06:02:38 PM »

Hi Brian,

Hmmm the link opens for me...

I'll paste in the link to the complete page again here ...

https://soundcloud.com/microbot-2

... and also paste the link specifically to the 1Voice-2Voice recording/photo ...

https://soundcloud.com/microbot-2/pressedwooddg-1voice-2voice

If it still fails - Hmm have to get Elli onto it  -she is my digital guru ... I'm on a Laptop with Windows 8... could this be another Windows 8 headache?

cheers

Mike R
Logged

brianread

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1012
    • Slow and Steady Session in West Lancashire/Greater Manchester; Dance club in Rainford
Re: fitting stops to a hohner 2 voice
« Reply #12 on: May 25, 2013, 06:43:36 PM »

They work fine - thanks.

Interested to hear Andy W's 3 voice Pressed Wood - I met him at a Session the other night and had a go - very nice.
Logged
Brian Read
D/G Oakwood (new model), D/G, C /F, Bb/Eb and E/A Liliputs,
A STREB!!,
2.5 D/G Self made Emmanuel Pariselle, D/G Pokerwork,
and Wolverton Advanced G/D Anglo Concertina and C/G  1937 Wheatstone.
all played "lefty" with mostly an extra air button, except the Concertinas which I play the conventional way round.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal