Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: was this stupid?  (Read 2335 times)

0 Members and 1 Guest are viewing this topic.

nfldbox

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 492
was this stupid?
« on: September 15, 2012, 06:38:10 PM »

He asks, after the fact. One of my smallest reeds was not playing on the press. I opened things up and could not figure out the problem. I scraped the reeds a bit with a very fine, very sharp knife. Now it is playing fine. Was this successful but stupid?
Logged
BC Cairdin
BC Hohner Double Ray
Bouchard en Ré

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: was this stupid?
« Reply #1 on: September 15, 2012, 06:42:21 PM »

He asks, after the fact. One of my smallest reeds was not playing on the press. I opened things up and could not figure out the problem. I scraped the reeds a bit with a very fine, very sharp knife. Now it is playing fine. Was this successful but stupid?

Lucky rather than stupid, guess you dislodged whatever was stopping the reed sounding.   ;)

nfldbox

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 492
Re: was this stupid?
« Reply #2 on: September 15, 2012, 09:32:40 PM »

So any time a reed is not playing, it must have something stuck in it?(I mean, assuming the reed is not broken and the air is getting to it.)
Logged
BC Cairdin
BC Hohner Double Ray
Bouchard en Ré

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: was this stupid?
« Reply #3 on: September 15, 2012, 09:39:50 PM »

Either it has something stuck in it or the reed has swivelled round on the rivet and is caught on the edges of the slot. Although mostly that just gets a buzz rather than nothing, as there is a reasonable amount of clearance between reed and slot (although on higher end boxes I believe this clearance is less).

By scratching a reed you risk mucking up the tuning, so probably not something to do again. Pinging a reed often works wonders - getting a piece of brass or a knife  and levering up the top of the reed and allowing it to ping back. That will often dislodge the bit of dust or whatever.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: was this stupid?
« Reply #4 on: September 15, 2012, 10:26:22 PM »

If I had something like this go wrong on my English concertina, a friend showed me how to get a newbank note ( quite tough but thin paper ) and gently push it under the reed to take out a burr or speck of dust.
Never got into my melodeon yet.......
Q
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

nfldbox

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 492
Re: was this stupid?
« Reply #5 on: September 15, 2012, 10:43:45 PM »

next time I shall "ping." I love that.
Logged
BC Cairdin
BC Hohner Double Ray
Bouchard en Ré
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal