Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3   Go Down

Author Topic: My "new" tuning bench  (Read 11844 times)

0 Members and 1 Guest are viewing this topic.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: My "new" tuning bench
« Reply #20 on: September 24, 2012, 07:57:42 AM »

Sorry folks but this one makes you look like a bunch of amateurs  >:E

http://www.ebay.de/itm/Akkordeon-Akkordeon-Stimmtisch-Firma-Heber-gut-erhalten-/170913060491?pt=Antike_Musikinstrumente&hash=item27cb36568b#ht_747wt_1028
I can see the idea (I think). There is a set of standard reference reeds in the upper section which sound when you operate the bellows, and there are slots where you place your reed-to-be-tuned so that you can sound both it and the reference reed at the same time. You adjust your r-t-b-t as necessary until it sounds in unison with the reference reed.

But...

The problem still remains that when you replace your reed back in the instrument, the pitch will almost certainly be different from the reference reeds. The reference reeds will presumably have been tuned so that they are at the right pitch for a given instrument. So unless the reeds you are tuning are for the exact same internal design/dimension instrument, the chances are that they will still not be right and further tuning in-situ in the instrument will need to be done.

Or have I missed something here? 
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: My "new" tuning bench
« Reply #21 on: September 24, 2012, 08:00:45 AM »

The block at left is for holding bellows pins, and is marked so that each pin goes back where it came from.
Brilliant idea! I have been sticking mine into a piece of polystyrene foam (pizza base actually) but your annotated wood block is just the job!
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Prestidigitator

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 448
  • Saltarelle, Hohner, Oakwood Baffetti
Re: My "new" tuning bench
« Reply #22 on: September 24, 2012, 08:38:01 AM »

The block at left is for holding bellows pins, and is marked so that each pin goes back where it came from.
Brilliant idea! I have been sticking mine into a piece of polystyrene foam (pizza base actually) but your annotated wood block is just the job!
Thanks, Steve.

It also saves me a bit of time spent grovelling on the floor, finding ones I'd dropped, or which had fallen out of the piece of cardboard I used to push them into.

I mark the pin holes L(eft)/C(entre)/R(ight), looking on Front or Back of Bass and Treble ends, when the box is standing upright on its feet.
Logged

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: My "new" tuning bench
« Reply #23 on: September 24, 2012, 07:21:03 PM »

I understand the reason for placing a screw with hand made threads back into the same hole it came from but what is the point of getting bellows pins back into the same slot if they are identical?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: My "new" tuning bench
« Reply #24 on: September 24, 2012, 08:45:41 PM »

but what is the point of getting bellows pins back into the same slot if they are identical?

If they were identical indeed there would be no point, but they aren't. Italian bellows pins do vary slightly in diameter,  Hohner ones are much more consistent, in my experience.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Martyn

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 455
  • Hohnerohner
    • Martyn White Melodeon Tuning and Repairs
Re: My "new" tuning bench
« Reply #25 on: September 25, 2012, 12:31:07 AM »

but what is the point of getting bellows pins back into the same slot if they are identical?

If they were identical indeed there would be no point, but they aren't. Italian bellows pins do vary slightly in diameter,  Hohner ones are much more consistent, in my experience.
I've also found this with Italian boxes. There always seems to be one oversize pin. Which means there is always one oversize hole.........Why?

Martyn
Logged
'Anything from a small repair to a full restoration'.
www.melodeonrepairs.co.uk

WestOz

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 197
Re: My "new" tuning bench
« Reply #26 on: September 25, 2012, 02:53:52 AM »

Attached is a late entry in the Heath Robinson Tuning Bellows Gallery.
It is the basic hand/gravity model, based on Pokerwork bellows, plywood base with g-clamps, plywood top with wooden guides and suitable holes. Note the sophisticated microphone clamping (headphones), as this accessory also doubles as my Skype phone.
Logged
Castagnari Dony, DB Binci, Hohner Pressedwood,  Liliput, Preciosa,Octoput,etc.

daver

  • Member
  • *
  • Offline Offline
  • Posts: 5
Re: My "new" tuning bench
« Reply #27 on: September 29, 2012, 09:48:07 AM »

Here's my attempt, again based on bellows from a decrepit accordian and patched with lots of gaffa tape.
Logged

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: My "new" tuning bench
« Reply #28 on: September 29, 2012, 09:54:10 AM »

I've also found this with Italian boxes. There always seems to be one oversize pin. Which means there is always one oversize hole.........Why?

Martyn

Probably as a key to make sure the bellows go back the right end , right way up ..
Logged
Q: How do you cure MAD?
A: Buy more Boxes

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: My "new" tuning bench
« Reply #29 on: September 29, 2012, 10:58:03 AM »

Italian bellows pins: I order mainly "Ø2mm" pins and know that I'm likely to get absolutely everything from Ø1.92mm to Ø2.10mm in about equal numbers. As long as one is aware of this, it is not without practical advantages.  I always use my digital caliper to ensure that all the pins in the same box have the same diameter.
Logged

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: My "new" tuning bench
« Reply #30 on: October 01, 2012, 02:21:38 AM »

I will try to post some photographs.

Wonderful, looking forward to them!
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: My "new" tuning bench
« Reply #31 on: October 24, 2012, 12:58:11 PM »

After a marathon tune-a-thon on Adam_T's 3 row 3 voice I have fitted an air valve to the bellows to allow them to be opened/closed at my command  (:)

Click on image for bigger view



« Last Edit: November 24, 2012, 07:06:37 AM by Lester »
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: My "new" tuning bench
« Reply #32 on: October 24, 2012, 01:23:33 PM »

Fiendishly clever  ;D
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: My "new" tuning bench
« Reply #33 on: October 24, 2012, 01:46:48 PM »

Been there, done that 3 years ago. :P

 ;D

It seemed like such an obvious thing to do that I'm surprised it's not de rigueur.
« Last Edit: October 24, 2012, 01:50:58 PM by Andy Simpson »
Logged

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: My "new" tuning bench
« Reply #34 on: November 12, 2012, 05:02:16 PM »

 Hi aradru, love the "bellows mate" idea, have you encountered any problems with valves catching on the inclined sides of the V ? It looks to be a handy solution, I generally have a block hanging about or tend to use the one I'm working on as I find it gets me pretty near without re tweeking once in the box AtB mory
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: My "new" tuning bench
« Reply #35 on: November 12, 2012, 07:13:07 PM »



I expect someone is going to suggest not getting my reeds mixed up!

.......... it goes with the territory.  ;)
I have just invested in a multi-compartment storage thingy in the hope that I can finally organise the hundreds of spare reeds that I have floating about the place.
A nice job for my new trainee reed technician seeing as most of them are still waxed onto the blocks.  >:E
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: My "new" tuning bench
« Reply #36 on: November 12, 2012, 08:09:37 PM »

Some photos of my tuning bellows and "mate".

Many thanks aradru! I see the same thing on a Utube video. What material did you line the V with?
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: My "new" tuning bench
« Reply #37 on: November 12, 2012, 08:15:48 PM »

Some photos of my tuning bellows and "mate".

So you have a matching hole on the underside of the V block that goes from the bottom of the block into the point of the V like this \ /
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: My "new" tuning bench
« Reply #38 on: November 12, 2012, 08:27:19 PM »

Here is the You Tube video (or was it inner tube video  :D) : https://www.youtube.com/watch?v=U--Vf99jyTA
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: My "new" tuning bench
« Reply #39 on: November 12, 2012, 08:53:42 PM »


Ah well. Great minds think alike and all that.
Thanks a million for bursting my ( small ) bubble!

p.s. I wonder if the patents office is open at this time of night?
      I need to cancel something!

It may not be patented! I wonder if the office is open right now!
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale
Pages: 1 [2] 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal