Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Bellows Gasket Replacement (potential daft question)  (Read 2232 times)

0 Members and 1 Guest are viewing this topic.

Ash

  • Good talker
  • **
  • Offline Offline
  • Posts: 72
Bellows Gasket Replacement (potential daft question)
« on: September 26, 2012, 09:46:40 AM »

OK - Firstly, I've been using the search facility on the site and have convinced myself that replacing gaskets on my melodeons is both easy and a good idea.

However, I've never done this before and the absence of a step-by-step with pictures sort of explanation has led me to a few questions.

Both melodeons are old, so I can't just compare what I'm going to put on with what's being scraped off.

So the first question is:
Where do it stick the self adhesive part of the neoprene tape? Does it go on the wooden frame facing in (as in towards the space in the bellows)? Or does it go facing the bellows themselves? (The second option makes more sense to me, but that doesn't mean it's right, does it?)

Next up - I'll order the stuff from Theo - but which thickness of the two types he has? I want to re-do an Erica and a Liliput (which has yet to arrive, but as it is unfettled I'm just assuming has the old 'candlewick' type gaskets). 5x3mm or 4x2?

Any recommended techniques for going round the corners?

Thanks for your patience...
« Last Edit: September 26, 2012, 10:16:03 AM by Ash »
Logged
Chinese one-row C; Erica C/F; Sandpiper D/G; Cliff Mott 'Cajun Pride' C; Sternberg Hungarian 2-row (?); Liliput C/F; Castagnari Lilly D/G... Something's got to go. Any offers?

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bellows Gasket Replacement (potential daft question)
« Reply #1 on: September 26, 2012, 09:54:46 AM »

Where to fit the gasket:   Just take a close look at how the original gasket is placed, then remove it and fit the new in the same position.  Take care not to stretch the new material as you fit it.  To make a neat join between the ends overlap the join then cut through both ends with a sharp blade, remove the cut ends and you you should have a perfect butt joint.

Erica 5 x 3
Liliput 2 x 4
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: Bellows Gasket Replacement (potential daft question)
« Reply #2 on: September 26, 2012, 03:56:16 PM »

Hi Ash. Take care not to stretch the gasket material as you apply it AtB mory (tune on the Cajun Pride sounds great by the way)
« Last Edit: September 26, 2012, 04:07:28 PM by mory »
Logged

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Bellows Gasket Replacement (potential daft question)
« Reply #3 on: October 25, 2014, 04:25:42 PM »

What size do I need for my Corona II? I have taken the old neoprene off, and cleaned it up as best I can, (any hints?)  What I took off seemed quite narrow, 6 mil, the case itself is 7 mil. the bellows frame, slightly wider.
The other job I wanted to do on it, was to put felt under the treble buttons. However the mechanism is fastened to the inner part of the frame that the buttons are housed in. Is there a way to put the felt in, without dismantling all of the button mechanism, on this model?

John
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bellows Gasket Replacement (potential daft question)
« Reply #4 on: October 25, 2014, 05:00:48 PM »

I use 5 x 3 gasket on a Corona.

Keyboards vary, early ones have a removable red pearloid top plate held on by 5 screws.  The mechanism is not attached to the keyboard housing.  The keyboard is held on by two long screws from inside the case.  Take off the top plate, remove those two long screws and you have easy access to place felt where required with having to disturb the mechanism

Later ones are black plastic and have a removable back held on by screws.  Just take off the back plate, glue on your felt and replace the back plate.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Bellows Gasket Replacement (potential daft question)
« Reply #5 on: October 25, 2014, 05:06:51 PM »

I undid, said long screws, and nothing seemed to want to come off. Didn't want to force it, so put them back again;)
It's called cowardice, Theo :)

John
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal