Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: MM on an LMM box - reasons  (Read 6264 times)

0 Members and 1 Guest are viewing this topic.

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
MM on an LMM box - reasons
« on: September 29, 2012, 12:08:01 AM »

Hi all,

I was talking to Mike the other day about how the MM setting on an LMM box often doesn't have the punch of the equivalent MM box. This has been dealt with to a certain extent on other threads.

Obviously a principal reason for this is that the palletboard responds differently to the driving force imposed on it. The palletboard is a sound absorber and having more reed blocks on it will alter that response.

I was wondering whether there was an acoustic reason for the phenomenon, as well as the vibration aspect. Having a cluttered palletboard might lead to some scattering of acoustic waves within the box, but I was wondering more about the reeds.

If you have a box where the bass reeds respond well (i.e. little or no weighting) then you may well find that if you sound a note low down on the treble end, you can feel or hear the bass reed of the same note vibrating. This is nothing to do with vibration passing through the box, but through the air - it is an acoustic phenomena. By making another reed vibrate, you are taking energy away from the sound.

In an LMM box, for every button, you have a resonant damper, tuned to the correct frequency (or a multiple thereof). So when you sound your note in MM setting, the L reed will also vibrate due to acoustic waves impinging on it, working much like a Helmholtz resonator in a troublesome room - selectively absorbing one particular frequency. This could be a reasonable explanation for why MM doesn't sound as good on an LMM, and also why the L reed on its own often sounds quite muted (an effect that I very much like).

I bring this up because it strikes me that unlike the vibration problem, which is solved only by making the reedblocks as light and as small as possible, which throws up its own problems, this problem you could do something about. For instance, you could have the bass reeds mounted such that they do not directly face an M reed. In fact you could go further, and have them at a different orientation to the M reeds, such as mounted flat. Or you could shield the bass reeds by putting in an angled reed pan like on the Schwyzerorgeli. Obviously it would diffract round the obstacle, which is fairly insignificant at those frequencies, but it might have some effect. I am not sure about how directional a reed as a sound source is, so I don't really know to what extent these things will have an effect.

It would be really interesting to see the effect of acoustically coupling two MM reeds by placing them on adjacent blocks facing one another, rather than being vibrationally coupled, through the same block. My hunch would be that it would be a harsher, less rounded sound.

I'd be interested to know the reed layout of anyone with an LMM box and whether or not they think that the MM setting is as punchy as they might expect.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: MM on an LMM box - reasons
« Reply #1 on: September 29, 2012, 07:38:49 AM »

I had a club IIIBS, the original expensive build square shaped version with the 5 reedblocks and the MM on that was definately not as punchy as even a corona II let alone a pokerwork or erica, that box is stuffed to the gills with reeds scattered all over the place (the later Helmet shaped version which developed into the Club IIIM was a far simpler design) .. your prognosis could also explain why Corona IIs aren`t as punchy as 2 row hohners and IIIs not as punchy as Corsos. the Corona IIIR falls into the "Club-IIIM" category as its closer related to the Club/Ouverture series than being a true corona, hence why unlike any other corona, it gets poor reviews from the Tejano/Conjunto crowd (I was chasing one at one stage and researched it as no one here had any experience of the box) .

As for really complex boxes such as 9 coupler LMMM desgins (Paolo elites, fancy Baffettis, gabbanellis etc), like the fancier clubs, there`s the issue of coupler slide and the usually necessary looser reedblocks to be a possible cause of weakening of the sound. I`ve found almost 100% that boxes with no couplers are punchier than those without - Compromise is always knocking on the door ..

I was going to use the classic Hohner 1040 versus HA112 (2 stop) scenario but there are numerous reasons why the 1040 is significantly better so its a lost point.
« Last Edit: September 29, 2012, 07:48:49 AM by Adam-T »
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: MM on an LMM box - reasons
« Reply #2 on: September 29, 2012, 08:03:57 AM »

Interesting ideas, Ukebert...

I have been able to compare the sound and response of two 3-voice LMM instruments which at first you would expect to be very similar: my own Castagnari Sander and a Hascy formerly owned by me but now belonging to another member of this forum. Both are modern instruments and both are fitted with Voci Armoniche TAM reeds, tuned with a typical Castagnari light swing tremolo. The Sander has a single stop on the RH end to control the low reed; the Hascy has grille switches to allow M, MM, LM and LMM reeds to be selected.

I have attached a photo of the RH interior of the Sander, which shows what seems to be a fairly typical reed block layout for a 3-voice LMM instrument. In the photo, the upper reed block carries the D-row M and M+ reeds; the middle block the D-row L reeds and the G-row L reeds; finally the lower block caries the G-row M and M+ reeds.

The reed blocks in the Hascy are different (unfortunately I don't have a photo). Because of the grille switch and internal slider design, the reed block layout is different. Assuming the equivalent photo layout, the upper reed block carries the D-row M reeds on once face and the D-row L reeds on the other; the lower reed block similarly carries the G-row M and L reeds; the middle row carries the D-row and G-row tremolo M+ reeds.

The sound of the Hascy is noticeably different from the Sander: the Hascy seems to have a more direct 'punchy' sound when just MM+ reeds are selected; the Sander MM+ sound is mellower. When LMM are selected the difference between the two instruments is less noticeable. I hadn't thought too much about these differences in sound until I read your post, which has triggered an 'Aha!' moment for me. Perhaps you are on to something here...
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: MM on an LMM box - reasons
« Reply #3 on: September 30, 2012, 12:59:55 AM »

Adam - Slide leaks are part of it certainly, as no slide is completely airtight. Couplers have a much greater effect - the best solution I've seen are the switches on the Shand Morino - beautifully designed. Both of those things are a third way of affecting the sound; as well as vibration and acoustic factors there is also airflow. Couplers will not only reflect and scatter sound waves emitting from the palletboard, they also obstruct a clean flow to the reeds. I have no idea the relative strengths of these two affects - I presume that the acoustic stuff is more noticeable.

Steve - Do you remember whether the upper reedblock of the Hascy was L then M or M then L? i.e. whether the M and M+ reeds were facing each other. If they were then it adds some credence to my theory.

The good thing about this theory is that you can do something about it, which isn't true of most things! As with everything though, it is a compromise and there are occasions when wanting a mellower box is a good thing. As I said, I love a mellow L set for example.

p.s. for those interested, my original post wasn't terribly clear. The advantage of not having the L reed facing an M reed is that less sound will reach the M reed due to reflection, absorption, diffusion etc. However, the sound will diffract around obstables, so the shielding effect will be minimal. So having a flying pan will be great, but not specifically because it shields the reed, but because the directionality of the source means that less sound will reach the L reed, due to the acoustics of the cavity.
« Last Edit: September 30, 2012, 01:02:14 AM by ukebert »
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: MM on an LMM box - reasons
« Reply #4 on: September 30, 2012, 02:23:03 AM »

Steve, G-row L reeds reads funny. A happy typographical coincidence.   

I hope soon to have an opportunity to test a related phenomenon when I get the new reed block with L reeds that I have ordered for my MMM Serenellini 273, since I'll be able to swap from MMM to LMM easily.

I hope it's a non-phenomenon. (Phenome-not?) I don't see why MM should sound different with the L reed block in from how it sounds with MMM reed blocks in (with one voice stopped), but you never know.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: MM on an LMM box - reasons
« Reply #5 on: September 30, 2012, 09:19:13 AM »

Steve - Do you remember whether the upper reedblock of the Hascy was L then M or M then L? i.e. whether the M and M+ reeds were facing each other. If they were then it adds some credence to my theory.
I'm so sorry, but I can't remember. If the new owner of the box reads this, perhaps he will be able to open up the treble end to have a look and report back.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: MM on an LMM box - reasons
« Reply #6 on: September 30, 2012, 09:20:00 AM »

Steve, G-row L reeds reads funny. A happy typographical coincidence.   
;D
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: MM on an LMM box - reasons
« Reply #7 on: September 30, 2012, 09:31:06 AM »

A simple test would be using a box where both sets of L reeds are on one block.   Comparing the sound with the L block in place, and with it removed completely.  To be really a fair test would require the fitting of a dummy reedblock so that similar internal sound reflections can take place.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: MM on an LMM box - reasons
« Reply #8 on: September 30, 2012, 12:23:11 PM »

Steve, G-row L reeds reads funny. A happy typographical coincidence.   

I hope soon to have an opportunity to test a related phenomenon when I get the new reed block with L reeds that I have ordered for my MMM Serenellini 273, since I'll be able to swap from MMM to LMM easily.

I hope it's a non-phenomenon. (Phenome-not?) I don't see why MM should sound different with the L reed block in from how it sounds with MMM reed blocks in (with one voice stopped), but you never know.

In that case it will probably sound a bit different, but probably the difference would be almost unnoticeable I'd think. Reason being that the M block would be a bit lighter than the L block and the reeds would have a different acoustic response.

It would be interesting, as Theo says, to compare the MM sound with the L block in to the sound when it is removed. And compare that to the MM sound with the M block in. When you get your new block I'd be very interested to hear what you think. I presume that it is the middle block that is exchanged?

Matt - You may well be right; what you say sounds plausible. It is obviously very difficult to categorically say what is going on with boxes, since there are so many variables between them.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Tamba

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 294
  • Busilacchio
Re: MM on an LMM box - reasons
« Reply #9 on: September 30, 2012, 12:32:43 PM »

Owen,
this is the inside of my 3 voice Baffetti (a Saltarelle Berry in all but name). The reed block set-up seems to be the same as Steve's Sander. Whilst I love the box as a 3 voice, as a 2 voice it is rubbish and lacking in any punch or depth.It is my intention to get this box fettled in the next year and I will find out if anything can be done to remedy this . Any thoughts on how this could be achieved would be welcome? As it is swing tuned I have wondered if a wetter/drier tuning could make any difference?

Cheers,
Tim
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: MM on an LMM box - reasons
« Reply #10 on: September 30, 2012, 12:37:04 PM »

Owen,
this is the inside of my 3 voice Baffetti (a Saltarelle Berry in all but name). The reed block set-up seems to be the same as Steve's Sander. Whilst I love the box as a 3 voice, as a 2 voice it is rubbish and lacking in any punch or depth.It is my intention to get this box fettled in the next year and I will find out if anything can be done to remedy this . Any thoughts on how this could be achieved would be welcome? As it is swing tuned I have wondered if a wetter/drier tuning could make any difference?

Cheers,
Tim


If I am right, then the only effective way of doing it would be to make a new set of blocks, with the L reeds facing outwards on the outside blocks, rather than being on the middle block. Or even have the L reeds on two half blocks facing into the casing, with the M reeds as they are now. Other than that I'm not sure. It could be that a wetter tuning will make a bit more of a difference, Theo would know much better than I.

Out of interest Theo, have you ever come across a box where reeds to be musetted were on different blocks? And did you find it straightforward to do?
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Andrew Roche

  • Guest
Re: MM on an LMM box - reasons
« Reply #11 on: September 30, 2012, 01:07:25 PM »

I've been asked to make a 3 voice LMM E/A box. One of the requests made was to have the sound without the low reed as close to a 2 voice MM box as possible.

My thinking in trying to accomplish that is to have the MM reeds as much like a 2 voice MM box and the L reeds as unobtrusive as possible. There were a few revisions but the final version is the MM reeds on two glued-in blocks in the middle with the L reeds for each row on two removable single decker blocks with the reeds facing outwards.

We'll see how that works soon enough...
« Last Edit: September 30, 2012, 01:11:37 PM by Andrew Roche »
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: MM on an LMM box - reasons
« Reply #12 on: September 30, 2012, 01:31:28 PM »

I've been asked to make a 3 voice LMM E/A box. One of the requests made was to have the sound without the low reed as close to a 2 voice MM box as possible.

My thinking in trying to accomplish that is to have the MM reeds as much like a 2 voice MM box and the L reeds as unobtrusive as possible. There were a few revisions but the final version is the MM reeds on two glued-in blocks in the middle with the L reeds for each row on two removable single decker blocks with the reeds facing outwards.

We'll see how that works soon enough...

We appear to be of one mind Andrew! That is exactly what I would have gone for, including the glued in blocks.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: MM on an LMM box - reasons
« Reply #13 on: September 30, 2012, 01:33:47 PM »


Out of interest Theo, have you ever come across a box where reeds to be musetted were on different blocks? And did you find it straightforward to do?

Assuming that you are using musette in the conventional sense eg 3 voice MMM then there is always one set on a different block.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

boxer

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 380
  • B/C Pokerwork - ultimate ceili box
Re: MM on an LMM box - reasons
« Reply #14 on: September 30, 2012, 02:07:48 PM »

my LMM tommy works fine on MM - squeals like a piglet.  Grunts like an old sow on LMM.  I like it.

I've no idea how the blocks sit as I've never needed to go inside it.
Logged
Nuage, Tommy, Cairdin, 
Double Ray DLX 21x12, Black Dot,
Pre-Erica, Pokerwork
plus various stringed things

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: MM on an LMM box - reasons
« Reply #15 on: September 30, 2012, 02:57:28 PM »


Out of interest Theo, have you ever come across a box where reeds to be musetted were on different blocks? And did you find it straightforward to do?

Assuming that you are using musette in the conventional sense eg 3 voice MMM then there is always one set on a different block.

Ah, this is true. Do you find that more difficult to get sounding right? I know that the two MM reeds on a single block are coupled through the block (which is why you need to wax both reeds on before you fine tune), I'm just wondering what the effect on the sound would be if this was not the case.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: MM on an LMM box - reasons
« Reply #16 on: September 30, 2012, 03:56:58 PM »

There are plenty of LMM boxes where the two MM reed sets are on different blocks, for example the Hascy that Steve mentioned a few posts back.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: MM on an LMM box - reasons
« Reply #17 on: September 30, 2012, 06:36:55 PM »

Question for you, Theo.  Does a three voice box generally have the same size air hole (what else should I call them?) for each of the reeds, or are the ones for the L reeds larger - I assume that a bigger reed requires more air?  Could it be that the holes for the two M reeds are smaller than they would be on a similar MM box?  I'm just guessing that when designing a new box, some compromises must be made so the bellows don't just collapse in a couple of seconds.

On a related topic, did you ever manage to ream out the holes on a Club box to the Pokerwork dimensions?  If so, did it change the volume and tone noticeably?

Rob.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: MM on an LMM box - reasons
« Reply #18 on: September 30, 2012, 06:49:33 PM »

Question for you, Theo.  Does a three voice box generally have the same size air hole (what else should I call them?) for each of the reeds,
Yes
Quote
On a related topic, did you ever manage to ream out the holes on a Club box to the Pokerwork dimensions?  If so, did it change the volume and tone noticeably?


I've already answered this when you asked the same question on another topic http://forum.melodeon.net/index.php/topic,10441.msg128955.html#msg128955
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: MM on an LMM box - reasons
« Reply #19 on: September 30, 2012, 07:45:30 PM »

I've already answered this when you asked the same question on another topic

Thanks, Theo.  Sorry I must stop typing when I'm falling asleep!  It's similar to drinking - after a while I repeat myself.

I'm tempted to try it on my own Clubs, but that could lead to having to make a whole new board!

Rob.
Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal