When it's been mentioned that Frans Van Der Aa grinds down the plates on his boxes, I'd be willing to bet that's only shortening the longest few on the treble block and the low basses.
Spoke with Frans about this at Veldhoven trekharmonica (accordion) day last year. It was in the context of his 'compact' design and how he got the reed plates in! Got the impression he takes a mm or so off the sides of most of them, and believe he has to nail the plates in as a result (not looked). He also asserted that Oakwood had lifted the 'compact' idea off him after a St Chartier. But I didn't press the point as he was more interested in what colour I wanted 
That doesn't make sense. You need
more clearance between the reedplates to attach them with nails or screws whereas with wax you can have them almost touching each other, (eg, Castagnari Tommy, loadsa chromatic boxes). Then there's still the problem of the feet of the pull reeds if you grind down the edges on TAM or AM reeds.
The time he posted here he mentioned never having used Binci double rivets because they were 7mm longer so I think it's most likely that he shortens the low basses and the first few on the lower end of the treble blocks. It'd cause more problems than it'd solve to take material off the edges.
...and regarding Oakwood stealing the idea of compact boxes, Castagnari have been doing them for a long time and this thread is about a "compact" box from the 1930s so, unless his comment was in jest, I think he might be giving himself a wee bit too much credit there.
