Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Air button spring - Castagnari Tommy  (Read 4862 times)

0 Members and 1 Guest are viewing this topic.

jonm

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 209
Air button spring - Castagnari Tommy
« on: October 12, 2012, 09:17:46 AM »

Recently bought a Tommy. I play left handed, so operate the air valve with my little finger. That has never been a problem with my Lilly, and I have no problem reaching the Tommy valve either, it's just that the spring is a whole lot stronger and a challenge to push down.

Is there a reason why the spring is so much stronger? This did not appear to be the case with the other boxes I tried when I was buying it.

Can this be resolved easily, or do I need little-finger exercises from the Charles Atlas manual?
Logged
Castagnari Mory and Giordy D/G, Hohner Erica, four-stop in G, two-stop in G

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Air button spring - Castagnari Tommy
« Reply #1 on: October 12, 2012, 09:26:29 AM »

The Tommy air button is mounted on a 'plank' of wood which I guess has some resistance and then there is a spring on the actual air button mechanism:

Click for bigger image.

I guess if you are brave you could remove some of the wood from the plank to weaken its component of the require force but if that did not work you would need to adjust the strength of the mechanism spring which would need some trial and error to ensure lightness of touch vs correct sealing.

brianread

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1012
    • Slow and Steady Session in West Lancashire/Greater Manchester; Dance club in Rainford
Re: Air button spring - Castagnari Tommy
« Reply #2 on: October 12, 2012, 09:44:04 AM »

Or you could get one of the fettlers (Mike, Theo, Lester) here to create you an air button in the correct place for your thumb (which is what I did after a lot of years struggling with my little finger), and my playing took a leap forward (or backwards as some would say!). However I can see that the Tommy air mechanism is a bit "larger" than often the case, so perhaps that is less of an option.  Works for Pokerwork and Lilliput  though.
Logged
Brian Read
D/G Oakwood (new model), D/G, C /F, Bb/Eb and E/A Liliputs,
A STREB!!,
2.5 D/G Self made Emmanuel Pariselle, D/G Pokerwork,
and Wolverton Advanced G/D Anglo Concertina and C/G  1937 Wheatstone.
all played "lefty" with mostly an extra air button, except the Concertinas which I play the conventional way round.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Air button spring - Castagnari Tommy
« Reply #3 on: October 12, 2012, 10:37:15 AM »

Also the space may not be available inside a Tommy for a second button and air valve.

The wooden "plank" that Lester mentions is held in place by a screw, or possibly two screws, at the opposite end from the button itself.  You may be able to reduce the resistance by slackening of the screw(s) a little.  If you remove the bass panel this should be obvious.  Note: when removing the panel the button will be left behind, it is not attached to the panel in the normal way.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Air button spring - Castagnari Tommy
« Reply #4 on: October 24, 2012, 04:46:34 PM »

I wonder if the "plank" could be replaced with a piece of thich saddle leather?  It should perform the same functions whilst being considerably more pliable and without any tendency to spring back to place, so only the spring on the valve itself needs to be overcome by a wimpy pinkie.

Whilst on the subject, where does one buy good heavy leather nowadays?

Rob.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Air button spring - Castagnari Tommy
« Reply #5 on: October 24, 2012, 05:06:19 PM »

I wonder if the "plank" could be replaced with a piece of thich saddle leather?  It should perform the same functions whilst being considerably more pliable and without any tendency to spring back to place, so only the spring on the valve itself needs to be overcome by a wimpy pinkie.

Whilst on the subject, where does one buy good heavy leather nowadays?

Rob.

No it needs to be a stiff material to hold the button in position.  With leather it could twist and jam.

For leather I use Le Prevo.  They are close by for me but they do mail order.  Otherwise any good saddler would be able to help.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Air button spring - Castagnari Tommy
« Reply #6 on: October 25, 2012, 02:05:10 PM »

I suppose I was thinking of much heavier leather than is commonly available - after all during the civil war a hide jerkin was used to deflect swords (not always successfully)!  Unfortunately the otherwise excellent photo of the mechanism doesn't show what is being operated beneath the wooden "spring".  I must admit I was surprised that such a different machanism was used, my own box has a button on a leather hinge glued beneath the bass end board.  I thought most air buttons simply pressed down onto a curved wire to ensure alignment was not critical.  If that is the case with the Tommy, I'd be surprised if a replacement of saddle/bridle leather wouldn't hold its shape.

Rob.

P.S. Thanks for the link for a leather merchant.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Air button spring - Castagnari Tommy
« Reply #7 on: October 25, 2012, 05:13:42 PM »

The Tommy air button is designed to move almost parallel to the sides of the opening in the bass plate, thus the need for a rigid strip of wood.  Please do try leather though and let us know how it performs.


The strip of wood does not need to act as a spring though, it works just as well if hinged at the fixed end.  The air valve still has its own spring.
« Last Edit: October 25, 2012, 05:15:37 PM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

EastAnglianTed

  • The wise wearer of the onesie
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 531
  • Castagnari Hascy-East Anglia for the win!
    • My Youtube account
Re: Air button spring - Castagnari Tommy
« Reply #8 on: May 23, 2013, 06:22:05 PM »

    That mechanism is fantastic, really ingenious design.
Logged

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Air button spring - Castagnari Tommy
« Reply #9 on: May 15, 2016, 04:17:56 PM »

Have various Tommys various sizing  of the air valve opening? 
I recently played an older one (10 years?) and was surprised that there was no resistance at all to filling the bellows, while mine, and others I have played have that "inhale" sound when taking a big pull...
The valve seems to open far enough above the bass plate, limiting factor seems to be the hole.
Easy fix/fettle here?  Work for a pro only?
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Air button spring - Castagnari Tommy
« Reply #10 on: May 15, 2016, 04:44:29 PM »


Easy fix/fettle here?  Work for a pro only?

Take a thorough look at the air mechanism.  If you can see what needs doing and you can see how to do it, then you can do it!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Air button spring - Castagnari Tommy
« Reply #11 on: May 16, 2016, 05:02:55 PM »

Will pull the pins and take a look...
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal