Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3 4 5 6   Go Down

Author Topic: Fettling a Liliput  (Read 26164 times)

0 Members and 1 Guest are viewing this topic.

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Fettling a Liliput
« on: October 13, 2012, 07:42:20 PM »

I have my baby in pieces :o All the reeds are off the reed blocks and all the old wax cleaned up (:)
It is in good shape mechanically but obviously needs new felt on the pallets new bellows gasket etc. The buttons are varied colours form yellow to brown. The reeds had leather valves on them.

My questions are:
Do I replace the reed valves with leather or use vinyl?
The Casein buttons looking like the box had belonged to a smoker which is not true as there is no aroma. How do I whiten them up?
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Fettling a Liliput
« Reply #1 on: October 13, 2012, 08:04:10 PM »

I`d recommend Vinyl Valves , Hohner fitted vinyl from the 50s onwards anyway .. as for the yellow buttons, I`m pretty sure it`s what they`re made of which made them yellow so much over age more than being around a smoker, I`ve not found a way of "cleaning" them as the yellowness goes very deep ..
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Martyn

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 455
  • Hohnerohner
    • Martyn White Melodeon Tuning and Repairs
Re: Fettling a Liliput
« Reply #2 on: October 13, 2012, 08:15:04 PM »

I would replace the leather valves with vinyl as they are more reliable and I think they are more responsive.
You can 'clean' the old Hohner buttons by sanding them with a 1000 grit wet and dry paper then a 1400 grit ending up giving them a final burnish with T-Cut. But to be quite honest the amount of effort involved just isn't worth it on a Liliput as you would first need to take the buttons out to do it properly. The discolouration doesn't necessarily mean it was played by a heavy smoker, more likely to be caused by just normal sweaty hands.

Martyn
Logged
'Anything from a small repair to a full restoration'.
www.melodeonrepairs.co.uk

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: Fettling a Liliput
« Reply #3 on: October 14, 2012, 04:30:18 AM »

In order to declub a Liliput, does this mean replacing reeds with a different note or is it a re-tune/re-org with existing reeds?
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

Prestidigitator

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 448
  • Saltarelle, Hohner, Oakwood Baffetti
Re: Fettling a Liliput
« Reply #4 on: October 14, 2012, 07:14:29 AM »

I`d recommend Vinyl Valves , Hohner fitted vinyl from the 50s onwards anyway .. as for the yellow buttons, I`m pretty sure it`s what they`re made of which made them yellow so much over age more than being around a smoker, I`ve not found a way of "cleaning" them as the yellowness goes very deep ..

Nor have I. Casein is a milk-derived plastic, which was also used for clothes buttons (as a "man-made" substitute for mother-of-pearl), and the yellowing is the result of the natural ageing of the material. Use, mucky fingers, smoke etc. don't help, but I suspect that exposure to light, and perhaps also heat, may speed the ageing, as I have an almost unused Bb/Eb Liliput (no wear on wooden keyboard edge, bellows or leatherwork) which was kept stored for years and which has "nearly-new" buttons. As Adam says, the discolouration may go through most of the button.

No doubt there's a learned paper on Casein Ageing somewhere on the web.

I've tried the sanding, Brasso, T-Cut and other similar methods on my Rowbotham Liliput, and, as Martyn observes, the very slight improvement wasn't really worth it.
Logged

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: Fettling a Liliput
« Reply #5 on: October 14, 2012, 04:14:32 PM »

Because I love mechanical things (enjoyed Meccano as a child) and the pallet arms had rusted where they sat on the pallets I took the button assembly and arms completely apart. After the complete strip and clean (took the rod out of the assembly so I had all the arms and springs removed), I reassembled in about 30 minutes. It was fiddly getting the buttons in place but immensely satisfying when it came together  :M. When I get some new felt for the pallets and grille cloth from Charlie Marshall I will reassemble the treble end with the grill and apart from the reeds that end will be done. The bass end awaits me  (:)
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Fettling a Liliput
« Reply #6 on: October 14, 2012, 04:21:08 PM »

Because I love mechanical things (enjoyed Meccano as a child) and the pallet arms had rusted where they sat on the pallets I took the button assembly and arms completely apart. After the complete strip and clean (took the rod out of the assembly so I had all the arms and springs removed), I reassembled in about 30 minutes. It was fiddly getting the buttons in place but immensely satisfying when it came together  :M. When I get some new felt for the pallets and grille cloth from Charlie Marshall I will reassemble the treble end with the grill and apart from the reeds that end will be done. The bass end awaits me  (:)

My sort of fettler, not put off by horror stories of refitting treble actions  (:)

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Fettling a Liliput
« Reply #7 on: October 14, 2012, 07:31:06 PM »

In order to declub a Liliput, does this mean replacing reeds with a different note or is it a re-tune/re-org with existing reeds?

Hi Stephen,

"Declubbing" could mean different things.  The special features of the club system include the gleichton in the middle row (the notes C/C for a box in the home keys of C/F,  or the notes Bb/Bb for a box in the keys of Bb/Eb), the inner row of buttons that provide most of the accidentals, the various different tunings of the lowest notes on the main rows, and also the bottom/inside 2 bass buttons.  See this website for many details: 

http://www.delaguerre.com/delaguerre/pedagogy/club/layout.html

If you just mean retuning the gleichton (C/C to C/D or from Bb/Bb to Bb/C), then that can be done by retuning the existing draw reedtongues but you would be going up a full tone in pitch -- more than that if you are also re-pitching the whole accordion from A 435 to A 440.  I'm more knowlegeable about concertinas than accordions, but I hate to bring a reedtongue up that far.  I would rather start with a D/D or C#/D reed and bring one tongue down to C/D, or with a C/C or B/C reed and bring one tongue down to Bb/C.  I will probably be parting out a couple of broken and incomplete Hohners here that have the miniature reeds, so let me know if you need a couple.

PG
Logged

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: Fettling a Liliput
« Reply #8 on: October 15, 2012, 12:28:36 AM »

Busy with the bass today and got all that cleaned up too. Tricky getting the linkages in and out but found a way in the end. Put it all back together and noticed that the bass buttons stood slightly higher that the chord buttons. I didn't remember that being the case and was about to haul out my camera when I noticed the plastic bag with all the pallets I had just removed. Crisis averted!

So we are back together with only the reeds to tune, after of course I build the tuning table!

She is starting to look good and I have another question. Should I refinish the painted areas on the front of the keyboard and the bass end or leave them with the characteristic wear marks? My first thoughts are leave it but she would look pretty in a new dress!
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Fettling a Liliput
« Reply #9 on: October 15, 2012, 01:11:20 AM »

Because I love mechanical things (enjoyed Meccano as a child) and the pallet arms had rusted where they sat on the pallets I took the button assembly and arms completely apart. After the complete strip and clean (took the rod out of the assembly so I had all the arms and springs removed), I reassembled in about 30 minutes. It was fiddly getting the buttons in place but immensely satisfying when it came together  :M. When I get some new felt for the pallets and grille cloth from Charlie Marshall I will reassemble the treble end with the grill and apart from the reeds that end will be done. The bass end awaits me  (:)

30 minutes is pretty good! It is a bit of a nuisance reassembling the action for a Liliput/Preccy. Not impossible, but a nuisance.

Busy with the bass today and got all that cleaned up too. Tricky getting the linkages in and out but found a way in the end. Put it all back together and noticed that the bass buttons stood slightly higher that the chord buttons. I didn't remember that being the case and was about to haul out my camera when I noticed the plastic bag with all the pallets I had just removed. Crisis averted!

Been there!
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: Fettling a Liliput
« Reply #10 on: October 15, 2012, 01:13:48 AM »

In order to declub a Liliput, does this mean replacing reeds with a different note or is it a re-tune/re-org with existing reeds?
I will probably be parting out a couple of broken and incomplete Hohners here that have the miniature reeds, so let me know if you need a couple.

Paul I might take you up on that. What I want to do is move from my 2915 and HA114 and use the same fingering. I looked at this chart: http://info.melodeon.net/files/site/BbEbclub25.gif Is this a Liliput layout and if so should there be a gleichton on the Bb row?

I take it the gleicton's are the buttons that have a cross hatch on the surface of the button which are the 4th button on the Bb row and the 5th button on the Eb row. Is there a similar chart for a declubbed Liliput? Also what is the benefit of changing to a 4th button start?
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Fettling a Liliput
« Reply #11 on: October 15, 2012, 01:44:40 AM »

Hi Stephen,

The gleichton (button that has the same note on push and pull) should only be on the Eb row of a Bb/Eb club, sounding Bb both ways.  The crosshatching of buttons is a "sometimes present, sometimes not" sort of thing.  PM me or email me any original parts you would like (reeds, buttons etc) and I'll do my best.

PG
Logged

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: Fettling a Liliput
« Reply #12 on: October 15, 2012, 03:16:36 PM »

I've just heard from Hohner that my recently purchased Liliput #150177 left the Hohner factory on 18th November 1935.  It's nice to have a birthday for her!  She's quite lovely and I hope I'm playing that well when I'm her age.

I have just received word that mine (Serial No 119445) left the factory on 24th July 1935. She has a birthday and now I need to give her a name. My wife has suggested Anna as her grandmother, Anastasia, loved the melodeon whlst she was alive (Newfoundland).
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

Strigulino

  • The Night Owl
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 933
  • @strigulino on Twitter
    • Strig on YouTube
Re: Fettling a Liliput
« Reply #13 on: October 15, 2012, 06:40:05 PM »

I wonder if some kind of pearlescent or French manicure white nail varnish might do nicely for the buttons?  Or would the contents of the varnish be bad for the buttons?  There's always Tippex of course.  You'd have to be careful to mask the rest carefully.

Mine are a bit brown around the "home keys" but a bit of a patina is part of the charm of a vintage instrument I think.
Logged
~~~~~~~~~~~
The Strig

"World-famous poker player. Give her a good poker and she'll play any tune you like." - The Goon Show
Pets:  Two cats, one husband, a D/G Hohner Morgane, a C/F Liliput, a dark and mysterious anglo concertina, a Streb, a Giordy...

Helena Handcart

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2452
  • Saltarelle Nell
Re: Fettling a Liliput
« Reply #14 on: October 15, 2012, 06:49:43 PM »

I have just received word that mine (Serial No 119445) left the factory on 24th July 1935. She has a birthday and now I need to give her a name. My wife has suggested Anna as her grandmother, Anastasia, loved the melodeon whlst she was alive (Newfoundland).

You're as bad as me calling my pokerwork 'Peggy' although there is no reason for that whatever except that I had been at the gin.  It took me ages to think of a name for the Erica ....  ::)  ;)

Happy fettling
Logged
Saltarelle Le RomanĂ©  | Saltarelle Nuage | Oakwood | various elderly Hohners

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Fettling a Liliput
« Reply #15 on: October 15, 2012, 07:01:03 PM »

I've seen several Liliputs where attempts have been made to either abrade the surface to remove patina, or to apply paint, lacquer or tippex, and to my eye all have looked  far worse than if they had been left alone. They are old instruments, just enjoy them as they are., 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: Fettling a Liliput
« Reply #16 on: October 15, 2012, 09:30:02 PM »

I wonder if some kind of pearlescent or French manicure white nail varnish might do nicely for the buttons? 

Maybe if I painted my nails pearlescent or had a french manicure then folks would not be looking at the buttons as they would be thinking how fabulous his nails look?  :|||:
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Fettling a Liliput
« Reply #17 on: October 15, 2012, 10:58:15 PM »

My Liliput has black bass buttons. At some point I will work up the courage to replace the treble side with black ones - but I'm not there yet!
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Fettling a Liliput
« Reply #18 on: October 15, 2012, 11:02:41 PM »

I wonder if some kind of pearlescent or French manicure white nail varnish might do nicely for the buttons? 

Maybe if I painted my nails pearlescent or had a french manicure then folks would not be looking at the buttons as they would be thinking how fabulous his nails look?  :|||:
And if not, you might make some new friends.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

pikey

  • Addicted to squeezeboxes since 1975
  • Thread mod
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3364
  • If it moves, I'll squeeze it....
Re: Fettling a Liliput
« Reply #19 on: October 15, 2012, 11:03:35 PM »

Because I love mechanical things (enjoyed Meccano as a child) and the pallet arms had rusted where they sat on the pallets I took the button assembly and arms completely apart. After the complete strip and clean (took the rod out of the assembly so I had all the arms and springs removed), I reassembled in about 30 minutes. It was fiddly getting the buttons in place but immensely satisfying when it came together  :M. When I get some new felt for the pallets and grille cloth from Charlie Marshall I will reassemble the treble end with the grill and apart from the reeds that end will be done. The bass end awaits me  (:)

My sort of fettler, not put off by horror stories of refitting treble actions  (:)

It's fun, isn't it!  I did my Club II myself and wondered what all the fuss was about......
Logged
Still squeezing after all these years.
Mostly on hohners , with a couple of Dinos and a smattering of anglos - and now a Jeffries duet
Pages: [1] 2 3 4 5 6   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal