Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3 4 5 6   Go Down

Author Topic: Fettling a Liliput  (Read 26136 times)

0 Members and 1 Guest are viewing this topic.

pikey

  • Addicted to squeezeboxes since 1975
  • Thread mod
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3364
  • If it moves, I'll squeeze it....
Re: Fettling a Liliput
« Reply #20 on: October 15, 2012, 11:04:57 PM »

Busy with the bass today and got all that cleaned up too. Tricky getting the linkages in and out but found a way in the end. Put it all back together and noticed that the bass buttons stood slightly higher that the chord buttons. I didn't remember that being the case and was about to haul out my camera when I noticed the plastic bag with all the pallets I had just removed. Crisis averted!

So we are back together with only the reeds to tune, after of course I build the tuning table!

She is starting to look good and I have another question. Should I refinish the painted areas on the front of the keyboard and the bass end or leave them with the characteristic wear marks? My first thoughts are leave it but she would look pretty in a new dress!

I'd leave it, new paint will just rub off anyway as soon as you get hooked on playing it!
Logged
Still squeezing after all these years.
Mostly on hohners , with a couple of Dinos and a smattering of anglos - and now a Jeffries duet

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Fettling a Liliput
« Reply #21 on: October 15, 2012, 11:06:57 PM »

I wonder if some kind of pearlescent or French manicure white nail varnish might do nicely for the buttons?  Or would the contents of the varnish be bad for the buttons?  There's always Tippex of course.  You'd have to be careful to mask the rest carefully.

Mine are a bit brown around the "home keys" but a bit of a patina is part of the charm of a vintage instrument I think.

I don't know of any regular top coat that would hold up to playing.  By request, and with hesitation, I made a box with wooden buttons that I finished with a clear epoxy.  We'll see how that holds up, but I'm not expecting much.  Heck, I'd rather find "patina" in a bottle.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Fettling a Liliput
« Reply #22 on: October 15, 2012, 11:21:56 PM »

Just a thought - the later model Liliput has larger diameter buttons which are exactly the same size as the buttons used on the bass end of Ericas. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: Fettling a Liliput
« Reply #23 on: October 16, 2012, 03:06:26 AM »

In response to a PM I received, I uploaded some images to Dropbox

The images are my Liliput after the cleanup.

Also here is a list of things I ordered from Charlie Marshall @ http://www.cgmmusical.co.uk/CGM_Musical_Services/Welcome.html

ref.073H felt leather 300 x 50 x 2,5mm x 2
ref.071 reed wax block (100 grams)
ref.038C + extra valves 2.4 treble/bass reed valve set
ref.032C bellow gasket 5 x 2mm x 2 metres
leather fixing dots 9mm x 33
ref.034 white muslin grille lining 18 x 8 inches
ref.078SS reed nails 10mm x 200
« Last Edit: October 16, 2012, 03:51:55 AM by syale »
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: Fettling a Liliput
« Reply #24 on: October 16, 2012, 01:04:59 PM »

I have decided that the old girl will look just as good as she does now, so refinish of painted areas is off the todo list. I bow to the wisdom of the forum  ;)
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Fettling a Liliput
« Reply #25 on: October 16, 2012, 01:08:03 PM »

The value of reed nails is debateable.  I've seen plenty of old Liliputs where the reed plates have fallen out but the nails are still in place.  Hohner no longer use them in new boxes, and I've yet to see an Italian box with nails as well as wax.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Fettling a Liliput
« Reply #26 on: October 16, 2012, 01:13:59 PM »

it isn`t as if the reeds would seal with the wax crumbled and the nails in place anyway and the reeds stay in place while being waxed... though Lilipiut reeds need a different technique than the usual lay them all down and wax the lot on one side in one go due to them being so close together.
Logged
Q: How do you cure MAD?
A: Buy more Boxes

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: Fettling a Liliput
« Reply #27 on: October 16, 2012, 01:18:01 PM »

The value of reed nails is debateable.  I've seen plenty of old Liliputs where the reed plates have fallen out but the nails are still in place.  Hohner no longer use them in new boxes, and I've yet to see an Italian box with nails as well as wax.
I figured that the nails would help a beginner to keep the reeds in plcae while I waxed. It brings a question to mind. Do I lay a bead of wax down on the dividers and set the reeds on it one by one to seal them or is it sufficient just to lay the reeds side by side with no wax on the dividers. Waxing only around the perimeter.
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Fettling a Liliput
« Reply #28 on: October 16, 2012, 01:37:13 PM »

With a Liliput there is only a tiny space for wax and you must make the most of it.  Start at one end of the block and tack the first plate in place with a couple of spots of wax then lay a bead of wax alone the edge where the next plate goes and press the next plate into it.  You have to work quickly to place the plate before the wax has cooled because the plates have to have almost no space between them in order to keep the plate edges over the reed chamber walls.   When all the plates are in place then run a bead of wax along the ends of the plates and along the free edges of the end plates.  Using nails makes it more difficult to get the wax where it needs to go.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

PortDouglas

  • Member
  • *
  • Offline Offline
  • Posts: 12
  • Velvet gekko
Re: Fettling a Liliput
« Reply #29 on: October 16, 2012, 04:53:00 PM »

Just wondering how much of a concern is lead paint on liliput Hohners?

MatthewR prviously wrote - Finally, my kids have started showing an interest in the box, and the Liliput is an ideal starting place for them.  I suspect that the beautiful black gloss paint on the bass soundboard and the treble thumb groove is full of lead, and at some point I'll probably test it, and if guilty as charged I'll strip it, and repaint it.  However, for now, I just make the kids wash their hands between playing and the next PBJ.  It would be nice if I could get them to do that the other way around, as well.
Logged

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: Fettling a Liliput
« Reply #30 on: October 16, 2012, 05:19:37 PM »

Just wondering how much of a concern is lead paint on liliput Hohners?

At my age (over 50) and considering that children will not get to 'My Precious' and the amount of paint involved, I believe I would be sweating the small stuff.

Water quality, Air Quality etc living in a city is more of an exposure hazard over the long term in my opinion. Cell phone towers, irradiated food, GM food and the list goes on. The paint is not flaking and I don't sleep with my melodeons contrary to poular belief.

I am not that concerned.
« Last Edit: October 16, 2012, 05:26:10 PM by syale »
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Fettling a Liliput
« Reply #31 on: October 16, 2012, 05:21:17 PM »

Just wondering how much of a concern is lead paint on liliput Hohners?

...oh no, not this again... :-\

We've been there before...

http://forum.melodeon.net/index.php/topic,9919.0.html
Logged

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: Fettling a Liliput
« Reply #32 on: October 17, 2012, 10:06:57 AM »

Hate to be a pessimist but suspect that many of the valves in that set will be too big for the job.
One problem that can occur with plastic valves having (sometimes inaccurately positioned) punched rivet holes is that they wind up so close to the edge of the plate that they may foul the chamber wall when fitted.
This problem is exaggerated with the Liliput because, with the exception of the bass, the plates are too tightly positioned to allow any lateral leeway.
Logged

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: Fettling a Liliput
« Reply #33 on: October 17, 2012, 05:04:53 PM »

Chatted to Charlie on email and the valves are not prepunched. I can of course trim if they are too big. They will arrive soon so I can get on!
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Fettling a Liliput
« Reply #34 on: October 17, 2012, 05:49:45 PM »

You will still need more of the smaller valves for a Liliput.  Longer valves are also stiffer, so cutting down the length has its limits, taking about 1/4 off the length is ok, but I wouldn't want to trim much more than that or you could end up with valves that are too stiff for the size of reeds.  I'm sure Charlie will keep you right if you have explained what you are doing.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: Fettling a Liliput
« Reply #35 on: October 17, 2012, 05:50:58 PM »

I'm sure Charlie will keep you right if you have explained what you are doing.

And I did  (:)
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

Harmonicatunes

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 261
    • Harmonicatunes
Re: Fettling a Liliput
« Reply #36 on: October 18, 2012, 03:41:11 AM »

Done a bit of Lilliput fettling myself recently.

Been playing for 18 months, and reading about Lilliputs on Melnet for almost that long. Saw a C/F for sale a few months back on Melnet, along with photos and a video. Took the plunge, bought it.

The sound, the action, just about everything about it is lovely. However the bass reed for the Dm chord was very wheezy. A few weeks back, the instrument wouldn't close. Alarm bells went off, I opened it up. The reed had fallen out, had stuck itself in the bellows, the reed was bent up at 45 degrees. Not good, however the bellows were undamaged

A brief chat with Peter Hyde (I'm in Australia) convinced me that I could re-install the reed. He sent me some wax.

I bent the reed back into shape. Being a harmonica player I had the tools and experience to do it. Then I took a soldering iron, attached various bolts and other metal objects to it with picture wire to lower the temp, had a few trial goes with wax chips, then went at the real thing.

Almost burnt the leather valve, but managed to get the reed back on, straight and airtight. Score: Tony 1 Lilliput 0

I noticed however that the bass reeds looked new(ish). They were marked with a "T" and had leather valves. I'm assuming that the instrument is 1930's (serial number 440350). The bass reeds sound  sound great, but are considerably louder than the treble ones (which also sound great).

Are these "T" bass reeds the originals, or are they a more recent replacement?
Logged
Harmonica Player
Just starting with the Box

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Fettling a Liliput
« Reply #37 on: October 18, 2012, 08:42:40 AM »

Mine has H reeds in the treble and T reeds in the bass.

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Fettling a Liliput
« Reply #38 on: October 18, 2012, 09:09:40 AM »

Mine are all T reeds but they are Zinc plates
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Fettling a Liliput
« Reply #39 on: October 18, 2012, 09:32:03 AM »

Quite often Liliput reeds are zinc on the treble side, aluminium on the bass.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: 1 [2] 3 4 5 6   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal