Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 3 4 [5] 6   Go Down

Author Topic: Fettling a Liliput  (Read 26134 times)

0 Members and 1 Guest are viewing this topic.

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Fettling a Liliput
« Reply #80 on: November 04, 2012, 09:27:47 AM »


Replaced the bellows gasket but I still have leaks so it looks like I need a thicker gasket. Probably visit the hardware store tomorrow and see what I can find.

At risk of "grandmother - suck eggs"  - dunno about Liliputs, but in general thicker gasket is the last resort. I have a concertina that is bowed to b*ggery and the thick gasket is making it worse.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Fettling a Liliput
« Reply #81 on: November 04, 2012, 10:40:53 AM »

Air leaks require that you do some careful detective work to identify the source of the leak before applying fixes that may or may not be necessary.  All the suggestions made so far need to be checked.  Neatly all leaks will make an audible sound of air escaping.  Many you will be able to feel the air against your skin.  If you get to the point that there are no leaks you can feel or hear then you should suspect the bellows themselves. Old Hohners can leak air due to the gussets becoming slightly porous, and the card itself can develop numerous tiny leaks in the valley folds.
Oh and one of Adam's tips is a very bad idea:  if you use rusty bellows pins you will in the long term make things worse.  Rust is very abrasive, and a rusty pin acts a bit like a file, enlarging the hole every time it is moved.  The place for rusty pins is in the bin!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Fettling a Liliput
« Reply #82 on: November 04, 2012, 12:07:20 PM »

I wonder if there is anything that can be used to proof a bellows?  Didn't the piper on board the Vital Spark claim that whisky was the perfect thing (administered orally)?  I wouldn't expect a permanent cure, but maybe a spray with some non-tacky, flexible coating on the inside would extend their life for a couple of years and at least demonstrate that new bellows are the permanent cure...

Suggestions on a postcard, please...

Rob.
Logged

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Fettling a Liliput
« Reply #83 on: November 04, 2012, 12:41:24 PM »

Oh and one of Adam's tips is a very bad idea:  if you use rusty bellows pins you will in the long term make things worse.  Rust is very abrasive, and a rusty pin acts a bit like a file, enlarging the hole every time it is moved.  The place for rusty pins is in the bin!

I understand your point here Theo and never thought they could act like a file in operation but the pins which were in it looked new and were a bit loose so air was escaping - the "rusty" ones from the Corso weren`t thick with rust like the original Lilliput ones  may have been (and likely the reason the holes were bigger in the first place) but they sealed the box, they didn`t need to be hammered in .
Logged
Q: How do you cure MAD?
A: Buy more Boxes

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: Fettling a Liliput
« Reply #84 on: November 04, 2012, 03:06:42 PM »

When replacing bellow gasket it is worth considering plugging the frame holes and redrilling them, through the casing holes, so that the foam is  held compressed. (Not that this should be necessary with a Liliput where the original leather gasket was probably thinner than any replacement material)
I see no need for an interference fit in the casing holes which makes it difficult to know you have the pin aligned with the hole in the frame.
Air leakage through slightly oversize casing holes can be prevented with wax down the hole before inserting the pin, which will conform to any clearance without detriment.
Oh and one of Adam's tips is a very bad idea:  if you use rusty bellows pins you will in the long term make things worse.  Rust is very abrasive, and a rusty pin acts a bit like a file, enlarging the hole every time it is moved.  The place for rusty pins is in the bin!

I understand your point here Theo and never thought they could act like a file in operation but the pins which were in it looked new and were a bit loose so air was escaping - the "rusty" ones from the Corso weren`t thick with rust like the original Lilliput ones  may have been (and likely the reason the holes were bigger in the first place) but they sealed the box, they didn`t need to be hammered in .
Hohner bellow pins are not produced to the closest of tolerances and even within the same batch there may be some that are a different fit in the same sized hole, let alone ones manufactured over a span of seventy years!
As I recall, the original ones in that Liliput were pretty rusted and warranted replacement if only from a cosmetic point of view. I thought I was doing you a favour by reassembling it for postage using new ones on the assumption that the discrepancy would get sorted properly during the restoration process. (:)
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Fettling a Liliput
« Reply #85 on: November 04, 2012, 03:26:07 PM »

When replacing bellow gasket it is worth considering plugging the frame holes and redrilling them, through the casing holes, so that the foam is  held compressed.

Emmanuel Pariselle teaches on his course to drill the holes prior to fitting the gasket ie put the bellows on the ends , drill the holes, then fit the gasket. This means the gasket will be well compressed when fitted.

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: Fettling a Liliput
« Reply #86 on: November 04, 2012, 03:47:28 PM »

I have a bow in the case and a bow in the bellows. The big leak is in the attached image. Any suggestions?
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: Fettling a Liliput
« Reply #87 on: November 04, 2012, 03:52:14 PM »

Bad phraseology on my part - should have said "drill the holes, through the casing holes with the gasket compressed" (I knew what I meant!)
I suppose the E.P. method would be even easier, virgin wood ensuring perfect alignment, so long as the gasket will compress to nigh on zero.
Logged

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Fettling a Liliput
« Reply #88 on: November 04, 2012, 04:07:27 PM »

I thought I was doing you a favour by reassembling it for postage using new ones on the assumption that the discrepancy would get sorted properly during the restoration process. (:)

No complaints here B, the Corso got a nice new set and the ones which ended up in the Liliput weren`t thick with rust, just "a bit rusty" as I said , they`re doing the job nicely and look good.
Logged
Q: How do you cure MAD?
A: Buy more Boxes

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: Fettling a Liliput
« Reply #89 on: November 04, 2012, 04:09:22 PM »

As I recall, the original ones in that Liliput were pretty rusted and warranted replacement if only from a cosmetic point of view. I thought I was doing you a favour by reassembling it for postage using new ones on the assumption that the discrepancy would get sorted properly during the restoration process. (:)

I got this from Paul Groff and my pins unusually,after reading several posts, were not rusty. Some patina on the heads but the bodies were shiny bright!
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: Fettling a Liliput
« Reply #90 on: November 04, 2012, 04:13:04 PM »

I have a bow in the case and a bow in the bellows. The big leak is in the attached image. Any suggestions?

The main bow is in the bellows frame I would say it is out by 1/8" in the middle. I was thinking that if I could dampen the frame and clamp it it may pull true, but to have damp wood next to my cardboard bellows may not be the best thing!
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: Fettling a Liliput
« Reply #91 on: November 04, 2012, 04:21:39 PM »

Bellows frame bow
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Fettling a Liliput
« Reply #92 on: November 04, 2012, 04:22:51 PM »

Hi Stephen,

Sorry that box is giving you more trouble!  Don't do anything to the main casework parts that's not very easy to reverse.  As you know I have a few "parts donor instruments" including a Liliput or two.  If you can't straighten out the bellows frames or fill the gap (reversibly) by shimming with thin leather under the gasket, I can check whether there is a bellows frame here that is straighter.  Might have to fill and re-drill it's bellows-pin-holes, but maybe not.

PG
Logged

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: Fettling a Liliput
« Reply #93 on: November 04, 2012, 04:28:41 PM »

Hi Stephen,

Sorry that box is giving you more trouble!  Don't do anything to the main casework parts that's not very easy to reverse.  As you know I have a few "parts donor instruments" including a Liliput or two.  If you can't straighten out the bellows frames or fill the gap (reversibly) by shimming with thin leather under the gasket, I can check whether there is a bellows frame here that is straighter.  Might have to fill and re-drill it's bellows-pin-holes, but maybe not.

PG

Thanks Paul (:) I am posting here to do 2 things, 1) seek advice before I do something I regret! 2) Hopefully help some other folks through sharing and listening to the great advice from people a lot more experienced than me w.r.t. melodeons.
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: Fettling a Liliput
« Reply #94 on: November 04, 2012, 04:33:27 PM »

What glue is used to glue the bellows to the frame?
Could I incur damage to the bellows if I try to split the frame from the bellows?
How would I split the bellows from the frame so I can get this in a jig to straighten it out?
Would it bend back over time?
Will I am be better off shimming?

I read this thread http://forum.melodeon.net/index.php/topic,5638.msg71084.html#msg71084 but it never explained how I would remove the frame from the bellows so I don't damage the bellows themselves
« Last Edit: November 04, 2012, 04:50:14 PM by syale »
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Fettling a Liliput
« Reply #95 on: November 04, 2012, 05:03:22 PM »

I think I would take the bellows off the frame before soaking the frame and clamping the bend out of it. I have transplanted bellows successfully before but it is not for the easily scared. Take a sharp thin blade and run it between the bellows and frame and they will part company. I stick them back on with evostik contact adhesive.

Suggest waiting on Theo and/or Rees to have their say though as I am a beginner at this and would hate to lead you astray.
« Last Edit: November 04, 2012, 05:05:33 PM by Lester »
Logged

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: Fettling a Liliput
« Reply #96 on: November 04, 2012, 05:22:59 PM »

I also had a brilliant idea, well I thought it was brilliant  ;)

I could take a thin strip of aluminium and screw it to the inside of the bow whilst keeping the wood square. I can bend the wood square with my fingers. As it is only on one edge I think this would be a great fix and reversible as there would only be 3 or 4 small holes in the frame (to fit the aluminium) that could be filled later. I would use countersunk machine screws going from the outside and nuts on the inside with a little thread lock.
« Last Edit: November 04, 2012, 05:24:57 PM by syale »
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Fettling a Liliput
« Reply #97 on: November 04, 2012, 05:23:12 PM »

Like Lester, I would defer to more knowledgeable repairmen, but I would try shimming under the gasket with a thin strip of leather in the area where it's not thick enough. The leather ought to be a matching color and tapered at the ends.  This is very reversible, might solve the problem, and wouldn't be asking old bits of wood to change their ways.

PG
Logged

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: Fettling a Liliput
« Reply #98 on: November 04, 2012, 06:07:15 PM »

Wish I still had my Meccano!
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: Fettling a Liliput
« Reply #99 on: November 04, 2012, 06:19:51 PM »

Don't think the aluminium strip is viable, suspecting the wood would eventually win and cause the metal to follow it?
If you did want to try the damp & clamp route would it not be feasible to interleaf the bellow corners (to allow for some reverse movement) then compress the complete bellows with enough packing against the bend to keep it concave while it dried. You should be able to brush enough water onto the wood without saturating the actual bellows.
(Andy Simpson recommends Titebond for attaching frames, it does work well and, being American would be available to you)
Logged
Pages: 1 2 3 4 [5] 6   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal