Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Corona IIIR  (Read 7582 times)

0 Members and 1 Guest are viewing this topic.

nemethmik

  • Good talker
  • **
  • Offline Offline
  • Posts: 54
Corona IIIR
« on: October 19, 2012, 09:24:02 AM »

the Corona IIIR falls into the "Club-IIIM" category as its closer related to the Club/Ouverture series than being a true corona, hence why unlike any other corona, it gets poor reviews from the Tejano/Conjunto crowd (I was chasing one at one stage and researched it as no one here had any experience of the box) .
Adam, you seem to be a very knowledgable and experienced. I have three Corona IIIRs, and I'd like to hear some technical details, what is/was wrong with the IIIRs?
Here is my experience: I use the IIIR when I need loud, powerful LMM sound. On the other hand when I practice in my room, I switch off the L reeds very often.
The IIIR is less than 5 kg. I used to have an Extreme IIIN LMM and it was over 6 kgs. I found the IIIR much more compact and much easier to play  than the IIIN. I simply did not find any feature in the IIIN that made it a better box than the IIIR. I brought both my IIIR and IIIN to an old reputable local tuner to ask his opinion, and he told me that the old Hohner reeds in the IIIR are of (a bit) better quality than the new reeds in the IIIN.
I have a Hohner Club IIIM de Luxe either, and the IIIR is lighter, and not less powerful.
I'd really like to listen to your experience about the IIIRs. It's only me who likes them?
All the Best and Thank You,
Miklos
Logged
Miklos

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Corona IIIR
« Reply #1 on: October 19, 2012, 04:31:44 PM »

I researched IIIRs when one came up I was interested in and no one on Melnet at the time had owned one (or no one who was willing to voice an opinion) so I search far and wide and the concensus from what I found was that they can be muffled on the inner row (I questioned this due to that there are no Pallets under the button mech being blocked, it has two rows of pallets not three like the old 5 reedblock Club-IIIBS) but even Theo said it was possible for muffling to happen with only 2 palet rows and he`s forgotten more about boxes than I`ll ever know .. secondly the register buttons and their linkages are notoriously unreliable (again from reports stateside, I know Ouverture and Club-III ones can be dodgy and are a similar design) . I scavenged all I could from Reyes Accordion forum and it was said that in MM Mode it didn`t sound as good as a Corona-II ......

All this was enough to put me off the box completely.. I had nothing else to go on because the Melnet Gurus hadn`t experienced the IIIR Firsthand so I never got to play one and as all the ones over here seem to be GCF , it`s no longer of interest . an ADG one may be of interest thesedays but I`ve never heard of one

« Last Edit: October 19, 2012, 04:37:24 PM by Adam-T »
Logged
Q: How do you cure MAD?
A: Buy more Boxes

nemethmik

  • Good talker
  • **
  • Offline Offline
  • Posts: 54
Re: Corona IIIR
« Reply #2 on: November 12, 2012, 09:36:49 AM »

"It might be desirable to have the wooden comb arrangement to improve the action. The wood can become swollen or dirt can gather in the slots ... this will then can 'grab' the lever as it moves up and down. It would be easy enough to clean - I've had to do it on several Dino Bafetti Black Pearls. You remove the action levers, clean inside the slots lightly with finest emery paper, also clean the sides of each lever, then re-assemble." (Mike Rowbotham)
Logged
Miklos

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Corona IIIR
« Reply #3 on: November 12, 2012, 09:42:15 AM »

This one I'm selling has the wooden comb action and the button action is very nice and smooth as is the coupler action.  It also seems to have a very even tone across the rows.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

nemethmik

  • Good talker
  • **
  • Offline Offline
  • Posts: 54
Re: Corona IIIR
« Reply #4 on: November 12, 2012, 09:59:06 AM »

the wooden comb action and the button action is very nice and smooth as is the coupler action.  It also seems to have a very even tone across the rows.
I have three Corona 3Rs and I fully agree, The tone is excellent across the three rows even in MM mode. It is a false myth that the inner row in MM mode of a Corona 3R is not powerful enough. I have a regular Corona II, and the Corona 3R in MM mode is as powerful as the Corona II on all the three rows. The bass of the Corona 3R is much more powerful than the Corona II.
I used to have two Corona Xtreme IIIN boxes, and the Corona 3R is much better box, IMHO: Xtreme is 6 kg; 3R is 4.5 kg and has smaller body and better quality (especially high pitch) reeds. I do not say that the Xtreme is not an excellent box, but I prefer the 3R.
Logged
Miklos

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Corona IIIR
« Reply #5 on: November 12, 2012, 11:55:55 AM »

Good to know - I wish someone had piped in when I asked a few months ago, all I drew was blanks and ended up Peter (can`t remember the surname) site and Reys accordions and was put off the box big time..

The biggest shame is that I`ve only ever seen G/C/F ones, I`ve not even heard of an A/D/G . Regular Coronas tend to be easily available in a number of keys .
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Corona IIIR
« Reply #6 on: November 12, 2012, 12:01:00 PM »

I wish someone had piped in when I asked a few months ago,

Probably just lack of experience, this is the first one I've had in my hands, and I'm quite impressed.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Corona IIIR
« Reply #7 on: November 12, 2012, 01:05:06 PM »

This one I'm selling has the wooden comb action and the button action is very nice and smooth as is the coupler action.  It also seems to have a very even tone across the rows.

It's been a while since I had an example of this model in hand, but my fallible old memory is that the pallets from the 3 rows of melody buttons are in 2 rows on the soundboard. So, reeds from more than one button row are mingled on each reedblock.  That means that you might want to listen for possible differences in tone quality (timbre), due to pallet position, *along* the rows -- because adjacent buttons on the same row (for example the C row) might have pallets opening either close to the keyboard or away from it.

Re: an open sound, I seem to remember big square holes in the bases of the reedblocks on these also.


PG
« Last Edit: November 12, 2012, 01:18:52 PM by pgroff »
Logged

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Re: Corona IIIR
« Reply #8 on: November 12, 2012, 08:40:24 PM »

Were any other Coronas LMM?  I'd snap up a IIIR if it were ADG, LM is my ideal sound.  Were any IIs LM?
Logged

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Corona IIIR
« Reply #9 on: November 12, 2012, 08:46:07 PM »

Only the new Xtreme-III V models . the IIIR is closer to a Club box in design than a "real" Corona . I guess it`s closest relative is the Club IIIM but with 3 rull rows and 12 basses and of course no gelichton ..... I don`t think there were any production Bandoneon tuned regular corona IIS

I`d like a IIIR in ADG now the myths have been busted too.
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Corona IIIR
« Reply #10 on: November 13, 2012, 09:22:30 AM »

Only the new Xtreme-III V models
Th eXreme IIIV model is an MMM box. the eXtreme IIIN is the LMM box.

Sorry - Typo - of course V = Vallenato..

As for Coronas, the "Normal" ones are a simpler design with no couplers, are (at least perceivably) less well made and have the standard metal grille - the design and build of the IIIR is almost the same as the Club-IIIM including the grille.

http://www.akkordeoncentrum.de/art/001991-2.jpg
Logged
Q: How do you cure MAD?
A: Buy more Boxes

nemethmik

  • Good talker
  • **
  • Offline Offline
  • Posts: 54
Re: Corona IIIR
« Reply #11 on: November 14, 2012, 07:53:32 PM »

the pallets from the 3 rows of melody buttons are in 2 rows on the soundboard. So, reeds from more than one button row are mingled on each reedblock.  That means that you might want to listen for possible differences in tone quality (timbre), due to pallet position
The Corona 3R has two rows of pallets. All pallets of the outermost row are positioned on the upper row of palletts. The palletts of the inner two rows are placed on the two pallett rows. With all my respect, PG, My conclusion is exactly the opposite: this is an excellent design to make a consistent sound of all the buttons. A Corona is mostly played cross row, therefore a consistend sound is desirable. I have been playing Corona 3Rs for a while, and I can say that when you press a button you will never be able to tell, if the sound comes from the upper or lower pallett row.
Logged
Miklos

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Corona IIIR
« Reply #12 on: November 15, 2012, 01:54:26 AM »

the pallets from the 3 rows of melody buttons are in 2 rows on the soundboard. So, reeds from more than one button row are mingled on each reedblock.  That means that you might want to listen for possible differences in tone quality (timbre), due to pallet position
The Corona 3R has two rows of pallets. All pallets of the outermost row are positioned on the upper row of palletts. The palletts of the inner two rows are placed on the two pallett rows. With all my respect, PG, My conclusion is exactly the opposite: this is an excellent design to make a consistent sound of all the buttons. A Corona is mostly played cross row, therefore a consistend sound is desirable. I have been playing Corona 3Rs for a while, and I can say that when you press a button you will never be able to tell, if the sound comes from the upper or lower pallett row.

Hi nemethink,

I'm not sure we disagree so much.  Thanks for confirming my memory of the way the reedblocks are laid out.  I'm delighted if you don't hear a difference in tone quality between the notes played from the upper or lower row of pallets on the soundboard.  It's still worth pointing out that pallet position on the IIIR will differ *along some button rows* (based on your description, evidently only along the middle and inside row of buttons), rather than solely *between* rows of buttons as for some other 3-row Hohners.  Thus to test for any difference in tone quality due to those different pallet positions, the player may want to listen closely to series of notes along the rows of buttons.

PG
Logged

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Re: Corona IIIR
« Reply #13 on: December 03, 2012, 11:34:18 AM »

UPDATE:  Well, I've snapped up an ADG IIIR as mentioned above.  Don't feel bad, guys - it was on eBay for about 40 minutes.   >:E  Winging its way to the NW US from Germany now.  I'm curious, how wet is the tuning on IIIRs?

Good to hear the rows are balanced - my BEsAs Corona III's inner row is very muffled.
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Corona IIIR
« Reply #14 on: December 03, 2012, 11:40:10 AM »

  I'm curious, how wet is the tuning on IIIRs?


Around +20 cents at A440.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Corona IIIR
« Reply #15 on: December 03, 2012, 11:41:13 AM »

Weird as the regular MMM Corona-IIIs I`ve heard inc the Vallenato have had a slight difference in the inner row but nothing massive like a 9 coupler Paolo or anything
Logged
Q: How do you cure MAD?
A: Buy more Boxes

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Re: Corona IIIR
« Reply #16 on: December 03, 2012, 06:38:19 PM »

I'm waiting on a Casta Rik, so someday this box might be up for sale, yes. 
Logged

AirTime

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 979
Re: Corona IIIR
« Reply #17 on: December 03, 2012, 07:45:11 PM »

I imagine you guys have seen this one:

http://www.ebay.com/itm/261135949248?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

How realistic is it to take one of these Coronnas (II or III) & tune it drier? What kind of sound can you expect?
Logged
1920's BbEb Hohner; 1920's  AD Koch; 1910 (?) One-row Hohner in D,  1910's GCB Maga Ercole; ; AD 1950's Pistelli, CF Sandpiper, CF Preciosa, BbEb Preciosa.

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Re: Corona IIIR
« Reply #18 on: December 05, 2012, 02:01:30 AM »

Button Box told me fitting in a new set of Corona III reeds would cost ca. $750, before installation.  You'd be best to just watch and wait, assuming you're thinking of buying a GCF and converting it over to some other tuning.   Their fee for drying a 3 row out was much more modest, $250?  I might consider that if my IIIR starts to give me a headache.
Logged

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Re: Corona IIIR
« Reply #19 on: December 21, 2012, 10:35:55 PM »

Well, my IIIR ADG showed up the other day, much to my surprise, DHL needs to teach their drivers how to knock or press doorbells.   >:(  Spent a few hours out in the cold on my doorstep.  No harm done far as I can tell though.  It's an oldie, 50s/60s fittings, the thumbstrap is riveted instead of screwed in though which the Corona characteristics webpage says is a later trait.  Wood keyboard; this is the only place where my BEsAs Corona III wins out, the action is a titch stiff and the III's buttons are a tiny bit more accessible - I like to thwack the A row's bottom note with my thumb for an Fnat, this is a bit more hit-and-miss with the IIIR.  The whole box is more compact too.

Like nemethmik says the LM is quite dry.  MM or LMM and you're altogether soggy though; so you've a few more items on the menu wetness wise.  The couplers are quite stiff but work fine.  The whole box is quite pristine far as I can see, nary a mark on the bellows.  I transferred the backpad I'd bought for the III too so they'll stay that way.  Bellows pins are a bit loose as you'd expect after sitting around for 40-50 years.

What kind of fee do you fellows charge for lightening a keyboard's action, too?  That sounds like more work than I'm capable of.  Am asking the Button Box what they'd charge too, might ask some of the local box repairmen about this too. 
Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal