Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: HA114 bass spoon spring  (Read 3681 times)

0 Members and 1 Guest are viewing this topic.

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
HA114 bass spoon spring
« on: October 20, 2012, 07:39:40 PM »

Broke my first spoon spring today.  :(  Off to the hardware store to spend an hour to look for some spring steel that I can bend into shape.

Has anybody had much success with safety pins or is this a temporary fix?

Whenever I go in to the hardware store, here in TX, with my north east english accent asking for an adjustable spanner instead of a crescent wrench the guys usually look at me as though I have 2 heads so I have learnt to stumble around till I find what I am looking for. 

I asked for gravy browning at a grocery store some time ago and the assistant looked right at me as though I was speaking martian. He couldn't help, but because I am a terrier I found it and proudly tracked him down and showed him only to be told "Ah, you meant Kitchen Bouquet'. In my defence, Kitchen Bouquet was the brand and it did have gravy browning written underneath. Needless to say I muttered for a few days after that.
« Last Edit: October 21, 2012, 03:59:13 PM by syale »
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: HA114 bass spoon spring
« Reply #1 on: October 20, 2012, 07:57:02 PM »

Charlie Marshall sells the springs, I had one off him a few months ago .. I don`t know the order number as I asked him on the phone for one which would do .
« Last Edit: October 20, 2012, 07:58:33 PM by Adam-T »
Logged
Q: How do you cure MAD?
A: Buy more Boxes

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: HA114 bass spoon spring
« Reply #2 on: October 20, 2012, 08:34:59 PM »

Thanks Adam, if I can find something that works nearby in Texas that would be great,else I will email Charlie.
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: HA114 bass spoon spring
« Reply #3 on: October 20, 2012, 11:23:15 PM »

I bought a pack of springs, found one roughly the same gauge and straightened it out. After reforming around a small screwdriver and fitting a split pin (cotter pin) I am back in business  (:)
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

Melodeon Marodeur

  • Member
  • *
  • Offline Offline
  • Posts: 23
  • Melodeon Marodeur
Re: HA114 bass spoon spring
« Reply #4 on: April 24, 2015, 01:28:12 AM »

I just broke a spoon spring and just took a quite large safety pin, twisted it one extra time over the screw driver and put it to place using an old spike as pivot. I then used two pair of nippers (is this the right word?) to bend the spike and then cut it of. The tension is lower than on the other spoons, but it does the trick, since I did not ruin the float (I probably just got lucky). For some idiotic reason it is difficult to get springs in Sweden. It would seem that we prefer to manufacture them over using them.
Logged

Mike Gott

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 285
  • Melodeon and hairy arm
Re: HA114 bass spoon spring
« Reply #5 on: May 07, 2015, 03:13:50 PM »

I've always made new ones from safety pins with the clip end cut off. If you can get the real thing that is of course best, but they've always worked perfectly well - and continue to do so. I did have a 1-row where a previous owner had replaced the broken off end of the spoon itself with....the cut off end of a real silver spoon, but that's a different tale.

Mike
Logged
"Traditional music was for entertainment, it wasn't for a further education class" (Bob Davenport)

Rivington Morris, Bolton, Lancashire.

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: HA114 bass spoon spring
« Reply #6 on: May 13, 2015, 03:35:48 AM »

I've also found that safety pins, with the one end cut off, works perfectly well as a replacement spring for the bass spoons...I can't even tell the difference!  What I did was go to the store and buy a few packages of different sizes.  When I found the size that worked, I made a whole slew of them to keep on standby as replacements as needed!
Logged
C#/D player

Johnniez

  • Good talker
  • **
  • Offline Offline
  • Posts: 51
Re: HA114 bass spoon spring
« Reply #7 on: June 11, 2015, 05:50:06 PM »

Hi Mselic
When you put in the safety pin as the spring how do you fix it..??

Do you solder it anywhere??

tnx
Johnniez
« Last Edit: July 01, 2015, 01:56:11 PM by Johnniez »
Logged
Every Day Is A Great Day
Some Are Better Than Others

Johnniez

  • Good talker
  • **
  • Offline Offline
  • Posts: 51
Re: HA114 bass spoon spring
« Reply #8 on: July 01, 2015, 01:58:10 PM »

I just broke a spoon spring and just took a quite large safety pin, twisted it one extra time over the screw driver and put it to place using an old spike as pivot. I then used two pair of nippers (is this the right word?) to bend the spike and then cut it of. The tension is lower than on the other spoons, but it does the trick, since I did not ruin the float (I probably just got lucky). For some idiotic reason it is difficult to get springs in Sweden. It would seem that we prefer to manufacture them over using them.

Hi..
You mention about not wanting to ruin the 'FLOAT'.. what are you referring too? Must be a finicky thing as you did mention you 'must have got lucky'

Geeezus.. I never get lucky anymore.. lol .lol

Have a Guddun !!

Johnniez
Logged
Every Day Is A Great Day
Some Are Better Than Others

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: HA114 bass spoon spring
« Reply #9 on: July 02, 2015, 02:24:40 AM »

I have often made my own springs using musical instrument string wire. The solid wire from various instruments including pianos. I measure the diameter of the broken spring and find a string of the same size. I wind the coil using tapered jaw smooth sided wire bending pliers. I match the number of turns and the direction of the turns. After forming the coil, I cut the arms to to length and terminate to the same configuration as the original.
Logged
I'm squeezin' and they're wheezin': old junker boxes

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: HA114 bass spoon spring
« Reply #10 on: July 02, 2015, 08:30:48 PM »

Hi Johnniez,

My apologies for not replying sooner - I did not notice your post in the thread!

There is no soldering involved when I replace the bass spoon spring.  I fashion a new spring out of the safety pin by cutting off one end of it, making it V-shaped.  I then simply pull out the little pin that holds the bass spoon in place and the spoon will come off.  Now the tricky part is putting it all back together.  It's not complicated, but a bit finicky.  I will hold the new spring in place on the underside of the bass spoon and the put the spoon back into position.  You need to make sure that the loop of the spring lines up with the little holes on the bass spoon itself and also on the rest of the assembly.  The little pin then needs to go through all the lined up holes and through the centre of the loop of the spring, and then you're done!  Tension holds the little pin in place, although I once had one work its way out.

Others may have different advice for you, but this is what I've done on several occasions and it works quite well.  If you use safety pins, I think the key is finding one the right size and tension so that it works and feels just like the ones that came from the factory.  I can't tell the difference.

If you need further help I can post pictures.
Logged
C#/D player

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: HA114 bass spoon spring
« Reply #11 on: July 02, 2015, 09:14:30 PM »

See this thread for how I insert the spring: http://forum.melodeon.net/index.php?topic=16611.0

Reply #11

Stephen
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

Johnniez

  • Good talker
  • **
  • Offline Offline
  • Posts: 51
Re: HA114 bass spoon spring
« Reply #12 on: July 03, 2015, 09:46:55 AM »

Ok guys and thanks..

Read the reply 11 and that is a great idea to  line up the center holes to pin it..

I got a hold of my son and asked him to borrow my old vernier and measured the spring dia. of an 'old' spoon off of a prewar hohner I have. The old spoons I have here sure beat the spoons on my HA-114.. The old ones are much sturdier and thicker.. Hard to bend.. Ones on my box you look at them and they bend. Cheap junk they are. But they work., all that matters.

The old spoons I have believe it or not do have NAILS for the pin.. A small thin finishing nail roughly 1/2 to 5/8 long will work.. I have not tried getting on off yet... lol that will be fun me thinks.

The size of the wire for the spring is .030 thousandths.

Millimeter conversion would be .762 so we round off at .8 mm..

So I have lots of 1/8  and 3/16 tubing so that will do.All set. .. Not sure where I will find the wire.

tnx a lot
Johnnie
« Last Edit: July 03, 2015, 09:56:33 AM by Johnniez »
Logged
Every Day Is A Great Day
Some Are Better Than Others

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: HA114 bass spoon spring
« Reply #13 on: July 03, 2015, 01:56:36 PM »

I use piano wire that i buy from eBay, sizes here: http://www.vandaking.com/wire-sizes.html

I have been using size 12 (goes for $6.45 here in the US)

Stephen
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

Johnniez

  • Good talker
  • **
  • Offline Offline
  • Posts: 51
Re: HA114 bass spoon spring
« Reply #14 on: July 03, 2015, 04:02:06 PM »

ah ok great and thanks for that.

No way I am spending that money plus shipping for lbs when a couple to three feet will last longer than I..

I am in the process of phone a few piano repair guys and see if I can get a 2 foot length or so for a beer..

What ya think..? will it work??  lol

Johnnie
Logged
Every Day Is A Great Day
Some Are Better Than Others

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: HA114 bass spoon spring
« Reply #15 on: July 03, 2015, 05:38:45 PM »

Yes piano repairers will have what you need.

There is a spring manufacturer near me who I've hand small amounts of wire from in exchange for a donation to the shop floor tea fund!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal