Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: 3-reed valve material?  (Read 3959 times)

0 Members and 1 Guest are viewing this topic.

RGF

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 214
3-reed valve material?
« on: November 17, 2008, 05:33:02 AM »

HI, all.

I've got an old 2-row Beaver that I'm making playable to give to our grandson. The chord reeds on the left hand are the type which have six reeds per plate -- 2x3. Each of the three-reed sets was originally covered with one flap of thin leather, and I'm wondering what I might use to replace that. (I suppose I could do individual mylar valves, but I'm looking for shortcuts here, as the box might very well wind up living in a closet or being traded for a skateboard!) Some sort of office film? Or some actual photographic film, not so thick as 35mm but some of the lighter base roll film?

I bet somebody here has done this!

Bob
Logged

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: 3-reed valve material?
« Reply #1 on: November 17, 2008, 05:52:53 AM »

Why not use the same as the original material, i.e. leather.

Or am I missing something here???

If you want to use something cheap, easily accessible and "non-animal" in origin, rather than camera film, try floppy disc maybe....

But unless you have a moral problem with animal products, I'd still go leather.

MC

Logged
Tuner/repairer, now retired.

RGF

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 214
Re: 3-reed valve material?
« Reply #2 on: November 17, 2008, 10:20:11 PM »

No, no problem with leather at all. I'm just trying to get this accomplished as quickly as possible, and without going in search of material. Was hoping to do it with something already on hand, and the leather I happen to have is way to limp for this application.

Bob
Logged

KWIMER

  • Member
  • *
  • Offline Offline
  • Posts: 12
Re: 3-reed valve material?
« Reply #3 on: November 17, 2008, 11:59:19 PM »

Logged

RGF

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 214
Re: 3-reed valve material?
« Reply #4 on: November 18, 2008, 12:11:18 AM »

Thanks, I have both leather and mylar individual valves on hand. I'm looking for a large flap that will cover three reeds abreast in a single plate. I'll try some office film that I have here and if that shows no promise, I'll just go with individual valves. No time to order or search for stuff -- needs to be finished by Thanksgiving holiday next week.

Bob
Logged

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: 3-reed valve material?
« Reply #5 on: November 18, 2008, 09:20:05 AM »

Bob, did you not notice my suggestion of a floppy disc, or did you just not take me seriously?
(Or are you too young to remember them??? ;D)

Perfect for what you need.

Good luck.

MC
Logged
Tuner/repairer, now retired.

RGF

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 214
Re: 3-reed valve material?
« Reply #6 on: November 18, 2008, 01:35:37 PM »

I did notice your suggestion, and it sounds like a good one, but I'm not so sure there are any still lying about! I'll have to ask my wife, as she's the archivist in the house.

As for not being old enough to remember them....that's a good one! I remember providing information on school questionnaires by using the special pencil to fill in the correct circles on the IBM punch cards. Ahhh, and the sweet smell of the mimeograph machine!  :P

Off to dig around for a floppy. Not only does it sound like a good material to try, but if it were any  older, it would be nearly period-correct for the instrument!
Logged

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: 3-reed valve material?
« Reply #7 on: November 18, 2008, 02:40:31 PM »

They'll probably be in the cupboard with the wire coat hangers and the odd socks.
What my wife calls "The Might Come In Handy One Day" cupboard.
Little does she realise that these things breed in there..... :o

MC
Logged
Tuner/repairer, now retired.

finnhorse

  • Guest
Re: 3-reed valve material?
« Reply #8 on: November 18, 2008, 09:51:12 PM »

I'm not sure what you mean by office film -- but 8 1/2"x11" transparency sheets for printing overhead projections aren't hard to come by in an office supply depot or stationary shop.  Craft stores sell a variety of plastics similar to valve covers for crafting purposes (think Easter baskets..).  You also get a choice of colors!  ;D
Logged

RGF

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 214
Re: 3-reed valve material?
« Reply #9 on: November 19, 2008, 12:10:30 AM »

Yes, that's what I meant. Got some here, and I think it'll work just fine for this. As in "Good Enough". Had a German teacher in high school who used to say something like (I know I'll butcher this) "Gut genug fur diese klasse". And that's all I'm after here.

Bob
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal