Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: LM-topic offspring  (Read 5234 times)

0 Members and 1 Guest are viewing this topic.

Cooper

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 705
  • Gaillrd G/C/#,Casta Allain8 GC,Lofft CF, giord ad
    • Cooper's homepage
LM-topic offspring
« on: October 24, 2012, 07:46:19 PM »

Hey guys,

I was wondering, i mentioned this in the other thread, does any of you have a solution for this?

I like the sound a LOT of an LM-setting. (Gaillard)

BUT, i tend to use my bellows a lot for little strong accents. When playing LM this sometimes results in the notes becoming false, because the low reeds respond different then the high ones,..

And also, when i want to go for volume, the same problem arises. I have heard it more often on boxes with the same setup played by others (but not all of them find it annoying).

Is there an easy solution? Something that can be done/fettled with the reeds? Choosing another brand of reeds perhaps?
 
W
Logged
Please correct my English, it's been a while, and i like to learn.
And don't be so polite! I know i must be typing tons of stuff that a native speaker would say differently...please enlighten me.

www.wouterkuyper.nl
www.lirio.nl
www.trekzakacademie.nl

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: LM-topic offspring
« Reply #1 on: October 24, 2012, 09:17:59 PM »

It could be a scaling issue. Changing the scale of the reeds (length and thickness) alters the response. Conceivably you could specify a scale which would mean that the two reeds would respond identically.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Cooper

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 705
  • Gaillrd G/C/#,Casta Allain8 GC,Lofft CF, giord ad
    • Cooper's homepage
Re: LM-topic offspring
« Reply #2 on: October 24, 2012, 09:25:40 PM »

It could be a scaling issue. Changing the scale of the reeds (length and thickness) alters the response. Conceivably you could specify a scale which would mean that the two reeds would respond identically.

Sorry, my English fails me here. What do you mean by scaling? The reeds i use now are the standard that Gaillard put in. Don't remember the brand-name, but it's top i've been told ;-)
W
Logged
Please correct my English, it's been a while, and i like to learn.
And don't be so polite! I know i must be typing tons of stuff that a native speaker would say differently...please enlighten me.

www.wouterkuyper.nl
www.lirio.nl
www.trekzakacademie.nl

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: LM-topic offspring
« Reply #3 on: October 24, 2012, 09:50:33 PM »

It could be a scaling issue. Changing the scale of the reeds (length and thickness) alters the response. Conceivably you could specify a scale which would mean that the two reeds would respond identically.

Sorry, my English fails me here. What do you mean by scaling? The reeds i use now are the standard that Gaillard put in. Don't remember the brand-name, but it's top i've been told ;-)
W

Scaling is generally taken to mean the relationship between the thickness of the reed and the length. It is these two quantities which define the pitch of the reed (as well as material parameters, which I won't go into as I'm assuming that all reeds are from the same type of steel). The idea is that you could have a long thick reed or a short thin reed and they would sound the same pitch. It turns out though that the long thick reed responds a good deal quicker than the short reed (I worked this out yesterday and am still puzzled as to the extent to which this is so).

I've just done some order of magnitude calculations and I reckon that if you have an L reed which is 1.26 times the length of the M reed and 0.8 times the thickness then they would respond at the same rate. Of course, it's actually a lot more complicated and it does seem rather low, but it's a start!
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: LM-topic offspring
« Reply #4 on: October 24, 2012, 10:04:59 PM »

The idea is that you could have a long thick reed or a short thin reed and they would sound the same pitch.

This seems to be entirely counter-intuitive to me. All the reeds that I have had intimate knowledge of have got shorter and thinner as the pitch rises. Or am I just misunderstanding you?

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: LM-topic offspring
« Reply #5 on: October 24, 2012, 10:38:09 PM »

Try thinking about it this way, if you have two reeds with the same pitch but different lengths, then the long one will have to be thicker.  Generally the lower itched reeds are made shorter than ideally they should be just fit lack of space, so these shorter reeds are either made thinner and/or weighted at the tips to achieve the required pitch.  If the reed is too thin in the area where it bends then it tends to flatten when played harder, adding weight to the tip tends to make the reed slower to start,  both of which could lead to a mismatch with the behaviour of a reed an octave above.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: LM-topic offspring
« Reply #6 on: October 24, 2012, 10:46:14 PM »

It's certainly what Steve Dickinson has told me about concertinas. The Wheatsone Aeola (the 8 sided one)  has long scale reeds which are more responsive, meaning you can play them quietly, but of course they'll go also just as loud as the short scale reeds, so they also have more dynamic range.

Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: LM-topic offspring
« Reply #7 on: October 24, 2012, 10:57:34 PM »

The idea is that you could have a long thick reed or a short thin reed and they would sound the same pitch.

This seems to be entirely counter-intuitive to me. All the reeds that I have had intimate knowledge of have got shorter and thinner as the pitch rises. Or am I just misunderstanding you?

The idea is that the longer a reed is, the lower it is and the thicker a reed is, the higher it is. I think. You can think about it in terms of wood, if you tap a very thin piece of wood it will produce a low tone, if you tap a very thick piece of wood it will produce a high tone.

As you go up in pitch inside a box, the scaling may change. I think it has something to do with the width having to change to keep the sound constant, I'll have a think tomorrow.
« Last Edit: October 24, 2012, 11:01:15 PM by ukebert »
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: LM-topic offspring
« Reply #8 on: October 25, 2012, 01:38:25 PM »

The idea is that you could have a long thick reed or a short thin reed and they would sound the same pitch.

This seems to be entirely counter-intuitive to me. All the reeds that I have had intimate knowledge of have got shorter and thinner as the pitch rises. Or am I just misunderstanding you?

The idea is that the longer a reed is, the lower it is and the thicker a reed is, the higher it is. I think. You can think about it in terms of wood, if you tap a very thin piece of wood it will produce a low tone, if you tap a very thick piece of wood it will produce a high tone.

As you go up in pitch inside a box, the scaling may change. I think it has something to do with the width having to change to keep the sound constant, I'll have a think tomorrow.
It's east to work out what happens from 2 basic principles:

1. As far as pitch is concerned there are only 3 variables to play with, length, width and thickness (assumng uniform reeds). Reed frequency (or any other mechanical resonance) is proportional to the square root of (stiffness/mass).

2. Reed air consumption (and measured SPL, though not perceived volume) is proportional to area.

Width has no effect except on air consumption and volume -- put 2 reeds side by side dry tuned, then weld them together, no change (except double the air consumption and SPL compared to 1 reed).

Stiffness goes up as the square of thickness, mass is proportional to thickness, so doubling the thickness increases frequency by sqrt(2) or 0.5 octaves but has no effect on air consumption or SPL (but note that higher-pitched reeds sound louder to the ear...)

Stiffness goes down as the square of length, mass is proportional to length, so doubling the length decreases frequency by 2*sqrt(2) or 1.5 octaves and doubles the air consumption and SPL.

So doubling thickness and length drops the pitch by 1 octave and doubles the air consumption and SPL.

Since the ear hears higher-pitched sounds as louder than lower-pitched ones (see Fletcher-Munson curves) reed scaling needs to take this into account to get a well-balanced sound across the range of the instrument.

It is left as an exercise for the reader to work out all the other possibilities... ;-)
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Graham W

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 277
Re: LM-topic offspring
« Reply #9 on: October 25, 2012, 01:52:40 PM »

When I spoke with Bertrand Gaillard while pondering  my own G/C/Acc he was very clear to me at least that while some people like the 2V LM sound he really didn't recommend it at all for a G/C instrument because the lowest reeds were 'too low' but felt it was fine on a higher pitched D/G.

I would imagine that given how particular he is about the design of  his instruments and how they 'breathe' and respond, he has probably considered issues of reed make,  scale and so on.
It might be best to phone him and discuss what you are experiencing?
Logged

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: LM-topic offspring
« Reply #10 on: October 25, 2012, 01:55:29 PM »

All good stuff, except I'm not sure about this:

2. Reed air consumption (and measured SPL, though not perceived volume) is proportional to area.

Width has no effect except on air consumption and volume -- put 2 reeds side by side dry tuned, then weld them together, no change (except double the air consumption and SPL compared to 1 reed).

How much air escapes through the side of the reed, compared with at the tip? Surely some does, in which case 2 reeds would use more air than 1 reed of same length and 2 x width. They'd make more sound too, though that's confused by the fact that they won't be in phase all the time.

There's a case for saying the air consumption is proportional to the reed perimeter, i.e. L + W instead of L * W. Or more accurately kL + W where k is some value between 0 and 1, describing an "average" air gap along the length.

The trouble with estimates like that, though, is the implicit assumption of "other things being equal" which of course they aren't...
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: LM-topic offspring
« Reply #11 on: October 25, 2012, 02:22:28 PM »

Width has no effect except on air consumption and volume -- put 2 reeds side by side dry tuned, then weld them together, no change (except double the air consumption and SPL compared to 1 reed).

Not convinced by this. I know that the width cancels out of all the calculations (I've done them), but those calculations assume that the vibration of the reed is planar. This isn't the case, the twisting mode is well defined, albeit at a very high frequency. I don't know what the effect of this might be on the flow, but a bluff body with sharp edges rotating screams vortex shedding, which is a source of sound. I did find a paper on flow vis of reeds but I'm not convinced that it was done properly. It did however find evidence of vortices. The width would have a large impact on these vortices, especially if it tapered. Just a thought.

Quote
Since the ear hears higher-pitched sounds as louder than lower-pitched ones (see Fletcher-Munson curves) reed scaling needs to take this into account to get a well-balanced sound across the range of the instrument.

I was aware of everything else, but although I was aware of this (intimately) I hadn't quite made the connection. Thank you! I'd been wondering why reeds were scaled differently as you go up the box, I think that's a very good explanation.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: LM-topic offspring
« Reply #12 on: October 25, 2012, 05:07:57 PM »


1. As far as pitch is concerned there are only 3 variables to play with, length, width and thickness (assumng uniform reeds). Reed frequency (or any other mechanical resonance) is proportional to the square root of (stiffness/mass).

Assuming I suppose the theory based on a rectangular tongue of uniform thickness.

From practice it is clear that the shape of the reed tongue also has an effect, both the thickness variations along the length, and whether the reed is rectangular or trapezoidal. Both can affect the playing qualities of the reed.
« Last Edit: October 25, 2012, 05:10:59 PM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: LM-topic offspring
« Reply #13 on: October 25, 2012, 05:16:15 PM »

Assuming I suppose the theory based on a rectangular tongue of uniform thickness.

From practice it is clear that the shape of the reed tongue also has an effect, both the thickness variations along the length, and whether the reed is rectangular or trapezoidal. Both can affect the playing qualities of the reed.

The width shouldn't make any difference to the fundamental frequency of the reed (it probably would do ever so slightly, it is an approximate solution after all), but it would make a significant difference to the airflow, in terms of consumption, loudness and response. Do you have any explanation for trapexoidal reeds? I'm assuming that they would respond slightly quicker, due to the less mass per unit length at the tip... but it's all rather handwavey.

I think that it is obvious to all here that varying the thickness has an appreciably variation on the tuning of a reed >:E

This will be the subject of my next primer post by the way, which is about half done.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: LM-topic offspring
« Reply #14 on: October 25, 2012, 05:24:56 PM »

Which is why the simple theory may not be sufficient here, because we are trying to eliminate pitches thatdo  change "ever so slightly"

I'm not hand waving at all, just describing what I've observed. Practical man's approach,  don't have a theory ... Yet.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: LM-topic offspring
« Reply #15 on: October 25, 2012, 06:02:00 PM »

Which is why the simple theory may not be sufficient here, because we are trying to eliminate pitches thatdo  change "ever so slightly"

I'm not hand waving at all, just describing what I've observed. Practical man's approach,  don't have a theory ... Yet.

My point is that in terms of frequency, it probably doesn't make much difference... but then changes in frequency aren't that interesting really. What is really interesting is the different quality of sound that different widths can give. I don't think that this is anything to do with the frequency of the fundamental, even of the location and relative amplitudes of the harmonics (I suspect that these are pretty uniform across reeds). What I think it does influence is the initial excitation of the reed, the transient. As you probably know, much of the information in an instruments sound is contained within the attack, so it is this that we should really be considering.

Of course, I have no real explanation for how width affects the transient, except for handwaving. Which is fine, but not if you want to nail something down.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: LM-topic offspring
« Reply #16 on: October 25, 2012, 07:00:30 PM »

Definitely right they about the initial transient, low pitch short scale reeds tend to start flat the come up to pitch,  you can hear this easily on may bass reeds, especially when tip loaded.
The other effect that has an unpleasant result with a bandoneon tuned box is the drop in pitch as a reed is played harder, this is also more pronounced on short scale, low pitch reeds.  I believe that these two effects between them account for the unpleasant sounds described in the original question.
I guess the people who are most likely to have cracked this are builders of bandoneons.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: LM-topic offspring
« Reply #17 on: October 25, 2012, 11:11:12 PM »

Interesting, thanks for that Theo (:) More evidence that long scale is the way to go.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: LM-topic offspring
« Reply #18 on: October 25, 2012, 11:15:42 PM »

 There is a also some mitigation of the delayed initial transient if you can build in more volume in the reed chamber for the lower notes, something I've learned from the way Emanuel P and Marc Serafini design their bass blocks.  But either way you probably need quite a bit more space for the low reeds than you would for the middle ones. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: LM-topic offspring
« Reply #19 on: October 26, 2012, 07:37:26 AM »

it also means that the box has to be kept in perfect tune because you don`t half notice slightly out of tune notes when switching to LM whereas on its own or buried in LMM with MM bit being trem or swing tuned you don`t notice slight reed tuning differences .
I like the sound of LM (and LH too) in a melodeon but it`s an awful limitation in a PA which makes me wonder why most, if not all Ladies model 120 bass light 2 voice PAs are LM .. hmmm
Logged
Q: How do you cure MAD?
A: Buy more Boxes
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal