Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: crackle. bass reed  (Read 1103 times)

0 Members and 1 Guest are viewing this topic.

philipm

  • Member
  • *
  • Offline Offline
  • Posts: 14
crackle. bass reed
« on: October 29, 2012, 07:58:31 PM »

hello
am getting a slight fuzz or crackle from a couple of bass reeds at low volumes.
what causes this?
how can i fix it?
it is a castagnari sander.
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: crackle. bass reed
« Reply #1 on: October 29, 2012, 08:13:35 PM »

Sound like a valve problem, ie the valves not opening efficiently under low pressure. You need to open the box and have a look see.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: crackle. bass reed
« Reply #2 on: October 29, 2012, 08:20:14 PM »

I think its more likely the valve on the other (push or pull) reed not closing properly.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

philipm

  • Member
  • *
  • Offline Offline
  • Posts: 14
Re: crackle. bass reed
« Reply #3 on: October 29, 2012, 08:48:44 PM »

thanks for that.
so when i open it, i see one or two of the flappy things have come away slightly from the reed.
is it a simple job to get them back against the reed plate?
or do i risk cocking it up completely?
best wishes form philip
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: crackle. bass reed
« Reply #4 on: October 29, 2012, 09:09:30 PM »

thanks for that.
so when i open it, i see one or two of the flappy things have come away slightly from the reed.
is it a simple job to get them back against the reed plate?
or do i risk cocking it up completely?
best wishes form philip

Are the problem notes on push or the pull as you can only see half the valves,  the ones that open to allow the push reeds to sound. Chances are that the the flaky valves will need replacing and you may need to remove the reed plate to get at the valve so you need to be confident enough to undertake re-waxing.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal