Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3   Go Down

Author Topic: Ebony wood  (Read 11147 times)

0 Members and 1 Guest are viewing this topic.

hionay

  • Member
  • *
  • Offline Offline
  • Posts: 10
Ebony wood
« on: November 02, 2012, 11:46:02 AM »

Is there any melodeon built with ebony wood? I thought Castagnari Melodeon(Max 4 stop) was ebony wood but I asked Castagnari and they said it's durmast wood painted black. Is there any chance to order a melodeon built with ebony?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Ebony wood
« Reply #1 on: November 02, 2012, 12:08:56 PM »

Ebony is not a very strong or stable wood in the sizes required for a melodeon.  Even "ebony" concertinas are usually a combination of ebony veneer, and ebonised pear wood.  I expect the only way would be to commission a special from one of the craft makers like Marc Serafini, or Aaro Luukinnen, for example.  Andrew Roche who us a member here might be worth asking too.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Ebony wood
« Reply #2 on: November 02, 2012, 12:29:32 PM »

another thing to think about is the weight. Ebony is one of the heaviest woods around.
Veneer is the way to go.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Andrew Roche

  • Guest
Re: Ebony wood
« Reply #3 on: November 02, 2012, 01:01:43 PM »

Theo is quite correct. It's an absolute no-go for manufacturers because it's a very difficult wood to work and machine and is very unstable in any situation with a very high rejection rate. It needs to be stored for a long time to ensure that it'll be stable in service, I know someone who had a stack of ebony guitar fingerboards stored under proper conditions that looked to be ok but suddenly went all squirrely after 4 years. That's the main reason why there's such a premium on ebony fingerboards on guitars compared to rosewood even though the timber isn't that much more expensive; similar to the reason why a decent bottle of single malt whisky, (that needs to be aged for years), costs nearly twice as much as a decent bottle of vodka, (that's ready to drink almost straight away), even though the production costs are similar.

Something that most people who are accustomed to only seeing Ebony in finished goods rather than it's raw state also don't realise is that boards are only ever pure black over very small areas and it's usually darkened to even out the appearance. There's a lot of colour variation with grey, brown or reddish streaks or the whole board can be a mottled dark brown or grey and many are disappointed to find out that the appearance they expect is actually artificial.

A melodeon made out of solid ebony would not only be unstable, (If someone asked me to make one I specifically wouldn't guarantee it against material failure), but it would also be HEAVY. Veneer would get round both of those problems but "black" ebony is only available in sawn veneer in very small sizes so it wouldn't be possible to get a perfect match all around the case. Macassar ebony would be a much better choice for both veneer and solid but even at it's darkest it's still stripey and some people can't reconcile that with the word "ebony"...
Logged

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Ebony wood
« Reply #4 on: November 02, 2012, 01:44:10 PM »

17 or 18 years ago I built three 2v. boxes in solid ebony. I don't recall it being difficult to machine, the really unpleasant thing however was the dust! Within hours my workshop resembled a coal mine, and even though I used both goggles and mask I was always in tears, coughing and itching.
I recently ordered some ebony veneer, but haven't yet been tempted to use or promote it. I was a bit disappointed with its purplish colour and it also turns out to be very laser un-friendly.
« Last Edit: November 03, 2012, 07:00:42 AM by diatonix »
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Ebony wood
« Reply #5 on: November 02, 2012, 02:21:41 PM »

On my Pariselle 2.5 row I opted for ebony trim on the thumb edge of the keyboard, it was filthy stuff to sand and deposited black dust in the pores of the adjacent cherry rather spoiling the finish  :(

Martyn

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 455
  • Hohnerohner
    • Martyn White Melodeon Tuning and Repairs
Re: Ebony wood
« Reply #6 on: November 02, 2012, 03:17:35 PM »

Is there any melodeon built with ebony wood? I thought Castagnari Melodeon(Max 4 stop) was ebony wood but I asked Castagnari and they said it's durmast wood painted black. Is there any chance to order a melodeon built with ebony?

I had one in the workshop recently and that was a 'special' Saltarelle Tramontaine which once belonged to Emmanuel Pariselle.
A nice looking box but that was probably veneered.

I believe it was also the actual box Emmanuel used as the pattern for the 14 bass instruments built on his courses.

Martyn
« Last Edit: November 02, 2012, 03:20:17 PM by Martyn »
Logged
'Anything from a small repair to a full restoration'.
www.melodeonrepairs.co.uk

Andrew Roche

  • Guest
Re: Ebony wood
« Reply #7 on: November 02, 2012, 03:19:16 PM »

When mixing light and dark woods it's advisable to seal surfaces first to stop sanding dust spoiling the surface like that or, worse still, the darker wood "bleeding" into the lighter one.

I started making classical and steel string guitars so I've made a lot of ebony fingerboards and bridges for guitars in the past and I absolutely hate it, I always hand planed and scraped it when I could because even routing the 3x80mm saddle slot in a bridge chucked around too much of that horrible black dust. I'm not really a fan of working exotic woods in general and one of the things I love about melodeons is that I can make so much use of timber from temperate climates. For a number of additional reasons I'm actually thinking of having a policy of only using European or North American woods and forsaking exotics.

All things considered, I probably couldn't think of a worse wood to make a melodeon from than ebony, at least something like balsa would be very light and inexpensive...
Logged

Gromit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 588
Re: Ebony wood
« Reply #8 on: November 02, 2012, 06:59:20 PM »

As Andrew says it's difficult to work - hard dense wood hence used for fingerboards so what's the point - also it's a increasingly rare rainforest wood which should be left there, using it for musical instruments deprives endangered animals of there habitat. Gibson got into trouble recently for importing ebony from illegal sources - even the "legal' sources are iffy (IMHO)... what you want is a nice bit of B&Q pine stained black, just the job :)
Logged

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Ebony wood
« Reply #9 on: November 02, 2012, 07:16:32 PM »

I think Stradivari used pine. It were the varnish that got him full marks
The sound were fantastic not sounding elastic
But was barred from all royal parks.
    Argh! Thread leak!!!
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Cooper

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 705
  • Gaillrd G/C/#,Casta Allain8 GC,Lofft CF, giord ad
    • Cooper's homepage
Re: Ebony wood
« Reply #10 on: November 02, 2012, 07:19:18 PM »

I know 2 people who were building instruments with ebony. One of them cannot do it anymore due to getting very allergic reactions to the dust and the other died of lungcancer, with a high probability of the ebony-wood-dust being a contributor,
W
Logged
Please correct my English, it's been a while, and i like to learn.
And don't be so polite! I know i must be typing tons of stuff that a native speaker would say differently...please enlighten me.

www.wouterkuyper.nl
www.lirio.nl
www.trekzakacademie.nl

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Ebony wood
« Reply #11 on: November 02, 2012, 07:59:24 PM »

Hio--

Forget about it.  As you can see from the replies.

Best woods are the woods most often used, and if you don't like any of them, there are plenty of builders who will paint or stain your box black for you (should you actually want it)

There might be someone who would build you a box of ebony veneer plywood, but in the first place, I do not think you said why you wanted an ebony box in the first place?

Durability?  Heaviness?  Blackness?

My recommendation:  black celluloid Erica!
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

Howard Jones

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1203
Re: Ebony wood
« Reply #12 on: November 02, 2012, 08:02:23 PM »

I think Ebony is now a protected species under CITES.  If I'm correct, this means that you could face difficulties not only getting hold of ebony as raw material, but if you travel internationally with the completed instrument you could risk fines and having the instrument confiscated.  The US is particularly hot on this, and it's proving to be a real problem for guitarists - even sending the instrument back to the manufacturer for a warranty repair can break the law.

http://www.fretboardjournal.com/features/magazine/guitar-lover%E2%80%99s-guide-cites-conservation-treaty

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Ebony wood
« Reply #13 on: November 02, 2012, 08:35:30 PM »

Howard is completely correct.  Ask Gibson what it cost them (and they were being careful!)

But Hionay is right, though, I just went and looked at the Casta site and the Melodeon and Handry 2K do look nice.
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

Ebor_fiddler

  • Chris
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2340
  • Hohner 1040 C One-Row, Sandpiper D/G, Liliput C/F
    • Ebor Morris
Re: Ebony wood
« Reply #14 on: November 02, 2012, 10:29:47 PM »

And regarding the "wear and tear"-ability of ebony, I would be careful. My fiddle originally had an ebony fingerboard, but after I put metal strings on to replace those my granny had used, it was not long before it developed neat little hollows under where my fingers pressed down!  :( I can imagine a melodeon finger board developing the same problem.  :||: :||:  :(  :|bl
My little sister sent my fiddle to her violin maker, who fitted an el cheapo dyed board, and I've had no more trouble. Quality is not always the best thing strangely enough!
Logged
I'm a Yorkie!
My other melodeon's a fiddle, but one of my Hohners has six strings! I also play a very red Hawkins Bazaar in C and a generic Klingenthaler spoon bass in F.!! My other pets (played) are gobirons - Hohner Marine Band in C, Hohner Tremolo in D and a Chinese Thingy Tremolo in G.

Andrew Roche

  • Guest
Re: Ebony wood
« Reply #15 on: November 02, 2012, 10:43:37 PM »

even the "legal' sources are iffy (IMHO)

Absolutely. In recent years "reclaimed" and "stump wood" Brazilian Rosewood has been appearing on the market in quantities, sizes and with a regularity that can only be described as extremely suspicious. The wood has been harvested illegally but in most cases the documentation is absolutely authentic, such is the value of the timber that bribing the right people to receive the documentation is a relatively small expense. I think for the most part the customers prepared to shell out for Brazilian Rosewood don't care as long they get what they want and makers are either too naive or turn a blind eye against their better judgement because of the whopping great premium they can add. Illegal logging is a big problem all over the world, particularly recently in Madagascar, and is even lucrative enough to attract organised crime on an international level, not just opportunistic locals chopping down the odd tree for some extra cash.

Sad thing is, I think it'll likely continue until it's all gone because customers keep on expecting more and more and many seem to be in denial about the whole thing, if even aware that the problem exists. It's one thing for a lovingly hand-crafted £3000+ custom made guitar that somebody will cherish for decades to have an ebony fingerboard but it's quite another for them to go on £500 Chinese factory guitars churned out by the container load...

Apart from some recycled Mahogany offcuts from guitar making that I've made reedblocks out of, I've so far only used European and North American woods in the melodeons I've made and am making and that's the way it's going to stay.
« Last Edit: November 02, 2012, 10:47:14 PM by Andrew Roche »
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Ebony wood
« Reply #16 on: November 02, 2012, 11:05:51 PM »

I like to recycle stuff. I'm currently building a couple of Clippers in pitch-pine - floorboards salvaged from a Victorian hotel in Llandudno (thanks Graham).
Simon W found some maple floorboard off-cuts on Freecycle which I used to make his Clipper.
My cherry and walnut came from the local sawmill at Powis Castle.
My beech levers are made from old school desks.

Someone gave me an elm board which will one day be a melodeon.
People send me wood, some alder and cedar from Jeff in Oregon.
Bits of old wardrobe arrive in the post from Northumberland.
A bloke I met in the pub turned up with a five foot ash log, WTF!

I do have some pieces of Zebrano from which I am building another two Clippers - it was given to me, evans knows where it grew - it smells like dog-shit when machined.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

xgx

  • Bagpipes & Musette Boxes... and Banjos, luv 'em!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1157
Re: Ebony wood
« Reply #17 on: November 02, 2012, 11:46:37 PM »

Zebrano?

is it not a bit 'soft' for the structural elements or are you using it as a veneer? 
I've used Zebrano for turning and it has pp stability at 3mm (1/8")  ;)

Afterthought... Ebony... ebonised boxwood is a much better alternative, nowhere near as brittle!  That said, Ebony is quite beautiful when finished well...
« Last Edit: November 02, 2012, 11:50:25 PM by xgx »
Logged
Graham

Socio-Demographic:   Graduate, Coffin Dodger
 Location: N Cambs/S Lincs - UK

Bob Ellis

  • Hero?....Where's my medal, then?
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2878
  • Ain't I cute?
Re: Ebony wood
« Reply #18 on: November 03, 2012, 12:32:43 AM »

Somewhat off topic, but Rees mentioned maple, so it's his fault.  >:E

I have a lovely Acadian one-row in maple, which sounds as good as it looks, so maple is clearly a suitable wood for building melodeons, but I have never seen a two or three row box in maple. Is it just that I haven't happened to come across one or is there a reason why maple is not used for two and three row boxes? I ask because I am considering maple as a possible wood for the three row box I am hoping to build next year.
Logged
Bob in beautiful Wensleydale, Les Panards Dansants, Crook Morris and the Loose Knit Band.
Clément Guais 3-row D/G/acc.; Castagnari 1914 D/G; Karntnerland Steirische 3-row G/C/F; Ellis Pariselle 2.6-row D/G/acc.; Gabbanelli Compact 2-row D/G with lots of bling, pre-war Hohner Bb/F; Acadian one-row in D.

xgx

  • Bagpipes & Musette Boxes... and Banjos, luv 'em!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1157
Re: Ebony wood
« Reply #19 on: November 03, 2012, 12:50:43 AM »

Maple?
 ....
Ambrosia Maple
Bigleaf Maple
Birdseye Maple
Black Maple
Boxelder Maple
Curly Maple
Field Maple
Hard Maple
Queensland Maple
Quilted Maple
Red Maple
Silver Maple
Soft Maple
Striped Maple
Sugar Maple
Sycamore Maple?
Logged
Graham

Socio-Demographic:   Graduate, Coffin Dodger
 Location: N Cambs/S Lincs - UK
Pages: [1] 2 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal