Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Jack socket  (Read 2189 times)

0 Members and 1 Guest are viewing this topic.

sqwzboxstudent

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 977
  • dartmoor / gypsy style
Jack socket
« on: November 02, 2012, 12:24:22 PM »

I have seen one or two boxes online with a jack socket installed (same as electric guitar) and was wandering what the verdict was on them? Does it work well ? Are they easy to install? Are they expensive? Is there a better option? Basicly i dont want to be stuck to a mic stand whilst giging
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Jack socket
« Reply #1 on: November 02, 2012, 01:16:20 PM »

XLR socket is more reliable than jack, but mainly it depends on what it is attached to inside the box.    There have been lots of previous discussions on internal mic systems.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Jack socket
« Reply #2 on: November 02, 2012, 01:31:13 PM »

XLR socket is more reliable than jack, but mainly it depends on what it is attached to inside the box.    There have been lots of previous discussions on internal mic systems.
Jack sockets are the spawn of the devil, their only redeeming feature is that they're not phono sockets...

(unfortunately they're also universally used, and someone will always have a jack lead available)

XLRs can be a bit big for fitting on instruments, particularly if you want to keep the bass and treble ends separate (highly recommended), there are smaller reliable connectors available like mini-XLR with enough pins to do this in one connector.
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Ollie

  • Grumpy Young Git
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1900
    • Ollie King
Re: Jack socket
« Reply #3 on: November 02, 2012, 02:45:00 PM »

I was talking to Matt Quinn last night about Jeff Dando's internal mic system for melodeons. Sounds very neat indeed. Unfortunately, he doesn't appear to have a website, but I'm sure it's been discussed here before.
Logged
Hohner Erika 12 bass D/G : Hohner Erika Bb/Eb : Hohner 1 row 4 stop D : Hohner Erica 9 bass D/G :

http://www.olliekingmusic.com/

Free-Reed Specialist, Hobgoblin Leeds

Luke W

  • Member
  • *
  • Offline Offline
  • Posts: 10
Re: Jack socket
« Reply #4 on: November 02, 2012, 03:05:24 PM »

I'm not a big fan of internal mics on any instrument personally. If being stuck where the mic is stood is the issue, then I'd go for clip ons over internal. Less permanent as well if you change your mind!
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Jack socket
« Reply #5 on: November 02, 2012, 04:56:41 PM »

I use one (well actually two because I use two boxes at dances) of these - Microvox.

Sage Herb

  • Steve Harrison
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 762
  • Slaithwaite, UK
    • The Black Box Band
Re: Jack socket
« Reply #6 on: November 02, 2012, 05:14:32 PM »

I'm not a big fan of internal mics on any instrument personally. If being stuck where the mic is stood is the issue, then I'd go for clip ons over internal. Less permanent as well if you change your mind!
[/quote

Totally agree. I use 2 AKG gooseneck mics. I clip the left hand (dynamic) one onto the left-hand strap, where having one's hand through isolates the mic from mechanical noise. For the right hand, I remove the grill (my boxes are mostly Hohners) and clip the (condenser) mic to the edge of the casing. Obviously this arrangement occupies 2 channels of the mixer, but I regard that as a good thing as you can EQ each end appropriately. Easy to switch between boxes if you need to.
cheers
Steve
Logged
Hohner Erikas & Club 2s
Hohner gob-harps:
Vega Senator 5-string banjo; Alex Burns plectrum guitar

Black Box Band - www.theblackboxband.co.uk
Annie Dearman & Steve Harrison - www.dearmanharrison.co.uk
Phoenix - www.phoenixdanceband.co.uk
http://soundcloud.com/sage-herb

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Jack socket
« Reply #7 on: November 02, 2012, 06:02:49 PM »

I'm not a big fan of internal mics on any instrument personally. If being stuck where the mic is stood is the issue, then I'd go for clip ons over internal. Less permanent as well if you change your mind!
[/quote

Totally agree. I use 2 AKG gooseneck mics. I clip the left hand (dynamic) one onto the left-hand strap, where having one's hand through isolates the mic from mechanical noise. For the right hand, I remove the grill (my boxes are mostly Hohners) and clip the (condenser) mic to the edge of the casing. Obviously this arrangement occupies 2 channels of the mixer, but I regard that as a good thing as you can EQ each end appropriately. Easy to switch between boxes if you need to.
cheers
Steve
Exactly what I'd recommend if you want to be able to move and don't want (or have) internal mics.

In my experience the Microvox has uneven pickup across the notes because it uses multiple mic capsules (but not enough) so some reeds are closer than others and you get partial cancellation between them.

Resist the temptation to use two gooseneck mics on the treble end "to get even coverage" because these then have the same problem but even more so.

If using one gooseneck mounted at the top of the instrument, try and get it at least five or six inches away, use one with a cardioid pattern (hypercardioid is even better), and point it down at the position of the highest pitched treble reed that you use. The lower pitched reeds are then closer to the mic but off-axis which equalises the volume.
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Luke W

  • Member
  • *
  • Offline Offline
  • Posts: 10
Re: Jack socket
« Reply #8 on: November 02, 2012, 06:37:55 PM »

Good point about the 2 mic on one source, thats just asking for phase problems if they're not placed well.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal